Top quality for plastic injection molding. Our employees do their best every morning to ensure consistent quality and customer satisfaction.

You are looking for an innovative and reliable partner for your plastic products; without detours via an additional tool shop! Then you have found the right partner in us. We offer precision tool construction and high-quality plastic injection molding in all batch sizes from a single source. The right tool for every requirement With over 60 years of experience, a competent workforce and the most modern machinery, we design and manufacture injection molding tools, blow moulds, zinc and aluminum die casting moulds, permanent molds as well as cutting and forming tools with the highest precision. Precision in small and large series With our flexible machine park, we are able to produce small, medium and large quantities efficiently and economically in all common materials and also in special materials such as NFK natural fiber plastics. Our services for tool and mold making as well as plastic injection molding are comprehensive. As a medium-sized company with over 60 years of experience, we work on short decision-making paths with fast reaction times as well as high flexibility and adherence to schedules. Our services in tool and mold making: Advice on plastic injection technology and tool technology CAD designs of tools and/or parts Tool and Mold Making quality management Our services in plastic injection moulding: Advice on the choice of plastic and spraying technology We develop individual components and assemblies for you We offer series quality from prototypes, small and medium batch sizes to large series Die-cast zinc and aluminum Part Completion and Assemblies

Industrial Supply Sourcing GmbH is the German SALES and SERVICE COMPANY of Hiteco, an Asian supplier that supplies top customers worldwide. Hiteco Ltd. is a private Chinese company with more than 20 employees (four of them German speakers), headquartered in Shanghai (China). Since it was founded in 2004, Hiteco has primarily been supplying drawing parts such as 1. Turned parts 2. Pneumatic cylinder 3. Castings (various processes and materials) 4. Injection molded parts (including WKZ mold construction) 5. Stamped and forged parts to Germany, Europe and the USA. A smaller Hiteco office in North China also deals with wire mesh, perforated sheet metal and building materials. Hiteco is also active in the area of quality and supplier management, ie Hiteco looks after and manages the supplier base in Greater China on behalf of European companies (as an external workbench, so to speak). This includes services such as 1. the quality control before shipment 2. Monitoring supplier performance including supplier development programs in "Greater China", 3. or the search and qualification of new suppliers in China (e.g. for localization projects).

The company was founded in 2008 "DSF" in North Lithuania is engaged in the manufacture of plastic parts by injection molding. We are happy to share our knowledge regarding the manufacture and design of plastic parts with you so that we can achieve the desired result in an optimal way. Our machinery consists of modern fully electric ENGEL injection molding machines which offer extraordinary level of precision with lower energy consumption and thus the quality and shape stability of the products. We have 1500 square meters of production area. The plastic parts can be manufactured according to our own forms or according to the customer's specifications. When necessary, the appropriate shapes can be manufactured. We back up our quality production with on-going process and operator control. Our services range from the development, construction, production to assembly and packaging. We invite you to know us. Send us an email or give us a call. We guarantee on-time delivery, reasonable prices, high quality and look us in advance to pleasant business.

Since it was founded in 1955, TG Kunststoffverarbeitung GmbH has specialized in the development, manufacture and sale of technical plastic injection molded parts. We offer our customers the complete range of services from the product idea to series production. Thanks to our own tool shop and our many years of experience in the field of tool design suitable for plastics, we can achieve rapid development and market launch times for you. If you already have existing tools and are looking for a reliable contract manufacturer, we will be happy to provide you with our machine capacities and our extensive process know-how in production. Short reaction times, high adherence to deadlines and a high degree of flexibility are prerequisites for our joint market success. You will always be looked after by a personal contact person. Our contract manufacturing produces injection molded parts for a wide variety of industries with long-standing business relationships with well-known companies (e.g.B. Miele, HansGrohe, BSH, BMW, Audi, Bauhaus, OBI, IKEA, Würth) in the: • Sanitary engineering • Home appliances • packaging industry • construction industry • Electrical industry • Automotive industry (2nd tier) • Transport and apparatus castors We meet the constantly changing requirements of our industry and attach great importance to quality, which we demonstrate through regular certification according to ISO 9001:2015. We guarantee: • Comprehensive complete service from development to series production • Fast and competent service • Direct contacts • Fair conditions Your customers demand good performance from you at attractive conditions. Ask your supplier to do the same! Write to us, we are guaranteed to make you an ideal offer: Professional production that pays off for you.

Strength in forms: Langlotz injection moulding technology Many can make light-weight parts – so can we, but we can make heavy parts, too. ° machine clamping force up to 500 tonnes ° injection-moulded parts made of thermoplastic materials from 0.1 to 2,000 g ° extensive on-call storage centre for your needs ° own vehicle fleet ° a century of experience ° Made in Germany in the true sense of the word We will counsel and support you, manufacture your products according to highest quality standards and deliver on schedule. To help you limit the size of your inventory, we will be glad to keep your goods on call in our warehouse.

Manufacturer of injection molding tools 1 to. up to 60 to. multiple cavities 1K, 2K, 3K Mucell and SGI

We are a second-generation injection molding business with a 52-year background and over 25 years of know-how in reversible multi-cavity insert integrated proprietary optical gate nozzle hot runner mold bases; this technology allows customers to reduce mold base cost, engineering time, and CNC workshop load time. The entire mold base system and inserts to hold multiple simultaneous and mixed cavities can be custom-designed to suit the customer's dimensional item average dimensions, allowing the customer to recycle mold bases over the years. With our technology, we have been able to produce parts with thicknesses as low as 0.7 mm in 4.5-second cycles, operating at a temperature of 18°C. Cycle times can be further reduced by using more efficient injection molding machines. Of course, the geometry and thickness of the part impose certain limits.

As an innovative processor of thermosets - both in the press technique and the injection molding process - as well as high-quality thermoplastics, we put our decades of experience in the service of our clients. Maintaining the highest quality standards for our customers is our goal. The concerns of our clients are the center of our thinking. Responsible, objective advice in the interpretation of technical plastic parts and the selection of suitable materials is top priority for us.

Welcome to the UF Industries GbR. For more than 20 years, we have been bundling the necessary skills for everything to do with drawing parts in a separate department. Our employees advise and support you in the procurement of tailor-made special and drawing parts and produce high-quality and precise turned, milled and combination parts for you according to drawings - even in demanding geometries and in small batch sizes. Quality and function are our top priority. In order to achieve this, we are constantly developing ourselves and our portfolio. True to the motto: If you stop getting better, you stop being good! Our aim is to be able to offer an efficient and optimal solution for every specific, mechanical-technical requirement based on a drawing or sample. If required, we offer you fast and goal-oriented support in the realization of your constructions. Especially in the project phase, it is of crucial importance to choose the best, most modern and at the same time most cost-effective production technology. We would also be happy to optimize existing construction parts together with you.

We produce injection-molded parts for various industries — from individual parts to assemblies. From sophisticated development to toolmaking to production. Our optimised production allows us to meet customer requirements quickly and easily.

High-precision devices, milled parts, small batches and injection-molded parts — these are our areas of expertise; we produce these products at our plant in Jennersdorf with the greatest care, to the highest quality and with irrepressible commitment for our customers from a wide range of industries. Accurate, timely, flexible and at attractive prices.

At PTO, we are experienced, reliable and focused on good results. Our experience has made us what we are today: a team full of expertise and drive in the field of plastic injection molding. Work with us to benefit from this knowledge and stay one step ahead of your competitors! PROFOUND EXPERTISE BASED ON SWABIAN DETERMINATION We support you in implementing your project! PTO is a young and dynamic start-up that was founded in spring 2020. The vision we are pursuing is to offer our customers added value through in-depth knowledge in the field of plastics technology. Because of our ties to our home country, we attach great importance to the Swabian work mentality, paired with determination and innovative spirit. Our current project is the further development of in-house production that is as CO2 neutral as possible. Since September 2021, we have been able to produce our products in consistent and first-class quality on ultra-modern, all-electric injection molding machines. Thanks to the lean company structure, components can be manufactured cost-effectively and within a very short period of time. On an area of approx. 500 m², 3 all-electric injection moulding machines (100to/180to/280to), equipped with monitoring systems and the highest perfection of requested components, produce large and small batches.

Smater s.r.l. was born in 1981 as a company specialized in the production of injection molded plastic and rubber technical articles, which see their application in various industrial sectors.Quality, innovation, efficiency and reliability are the elements that have always distinguished us and allow us to relate excellently with major national and international players. We follow our customers step by step from design to delivery of the finished product.

With 451 employees and an annual turnover of around 56 million euros, Röchling Precision Components is a specialist in precision injection molding manufacturing in an international environment. With technologically sophisticated plastic applications and a wide range of high-precision components, the RPC Group mainly supplies key strategic customers Bosch, ZF, Continental, ETO, RAPA, Daimler, Hella and Würth Electronics. With many years of experience, high efficiency and flexibility, the company meets market requirements and acts in a future-oriented and sustainable manner.

Since it was founded 70 years ago, the Holzammer company has developed into one of the most important system providers for individual and complete components with a focus on medical technology. The competencies of the Holzammer Group are development and construction services, in-house model and mold construction, plastic injection moulding, surface finishing and assembly including complete packaging solutions. We support our worldwide customers from the first idea to the finished series product. Facts and figures: - In-house mold construction - Direct development partner for OEM items - Over 200 employees at 2 locations in Bavaria and Thuringia - Certified according to DIN EN ISO 9001, "QUB" environmental seal of approval, participant in the Bavarian Environmental Pact - Shot weights up to approx. 20kg in the TSG process, up to approx. 6kg in the compact process - Article dimensions up to 2 meters

CM S.r.l. is an Italian company, which was founded in the 60s as a precision turnery. Over the years the company has specialized in the production of coaxial connector / cable for radio frequency. CM Srl covers a premises of 3,000 square meters and employs 50 people. CM Srl operates as the parent company in the manufacture and sale of coaxial connector / cable and cabling; this has been a subsidiary the SIMM Srl, which has continued its activities in the field of origin mechanical machining, in particular turning and milling. The SIMM Srl operates not only traditional materials such as brass, steel and aluminum, but also such as Beryllium-copper alloys, and invar. We are also active in the processing of plastic material such as PTFE, POM, rexolite and Ultem.

Schloms AG was founded in 1986 by Richard Schloms and specializes in injection-molding vehicle license plate holders. Since its inception, the company has undergone impressive development and has earned an excellent reputation in the industry. Using the latest technologies and a dedicated team, Schloms AG produces a wide variety of injection-molded parts that meet customer requirements in terms of quality and design. Through continuous investments in the development of new products and the improvement of existing products, Schloms AG has succeeded in strengthening its market position and selling its products throughout Switzerland and internationally.

Schaltbau is a leading global industrial company that specializes in direct current and offers products and solutions that enable electrification. With a broad portfolio of contactors, connectors, switches and safety components, Schaltbau supports partners and customers in solving complex challenges in the areas of rail, energy and e-mobility. Based on almost a century of experience, Schaltbau is headquartered in Munich and is represented worldwide by over 1,000 employees.

Our company was founded in 1948. We offer a machinery which is capable of Injection molded plastic parts up to max. Produce 400g PS excess weight at a maximum clamping force of 1750 kN. In addition, we operate a blowing machine for producing hollow bodies up to max. 1500 cm 3 volume. Our machines are tools up to a max. Dimension of 600 mm x 600 mm, with a max. Elevation of 600 mm can be used (at 250 mm mold height). For the most common accessory devices (core pulls, Heizkanalsysteme, etc.), we have the necessary control systems. Our range of products include plugs and caps (each round, square and flat oval), bushings, washers, rings, pipe connectors, as well as special sections (such as Fußkufenkappen for tables & chairs, also with felt; nail glides; arc slider) Through our close collaboration with several toolmaking companies, we also in relation to Design, development, prototyping and series production have relevant experience. Our quality management system, we were able to successfully certified by TÜV Süd in 2004. Of course, we pay for the production of our products at a very good quality at a reasonable price with shortest delivery times.