1956, the company was founded by Master Ferdinand saver savers then led Konrad saver on. 1998 | the company was transformed into a general partnership with Hannes & Gregor savers and has since steadily increased for new workers. Currently 11 people are employed. In addition, the company is in a second production line - the vehicle - entered. 2000 | A new headquarters was built so that even large orders can be made easily (1000 m² production hall and 1,200 m² open area). 2003, the company has repositioned itself and an internal division of duties performed: savers Hannes took over the management of the company, the technical office and production, savers Gregor assembly. 2010 adopted the SAVE GMBH all the work, the technical office is expanding, acquired in April, the SOA records and since September 9001 ISO: 2008 certified.

Technical Trading Dreh-/Fräs-und for sheet metal parts

The Amend steelwork and metal GmbH is a small medium-sized company in Brandenburg 70 km from Berlin. We deal with the production of steel structures in various designs for over 20 years. Established in 1992 as a private company with a production area of approximately 50 m²; we currently have a permanent staff of 33 colleagues in four production halls with a total area of 3500 m²; operate. The production halls are equipped with machinery that is the high quality requirements of steel structure requirements. Thanks to our years of experience and not least because of our qualified staff, who are always engaged active, we could also over the border also compete in the market.

The tooling was founded in 1906 and currently employs 60 people. Focuses on the areas of tool and equipment, as well as contract manufacturing in the field of machining and EDM. Our customer base spans virtually all areas of automotive, capital and consumer goods industry and includes many names that are at the forefront of the world market. Construction We design our tools in 3D mainly on Catia V5 from IBM. In addition, eligible for 2D and 5-axis machining Tebis and Cadda V4 used. The data is done with dial name or e-mail in the IGES formats 2 - and 3D, VDAFS, CATIA, DXF or DWG. Toolmaking * Follow-on composite tools * Cutting and punching tools * Bending Tools * Stamping and pressing tools * Foil cutting tools * Foil deep drawing tools We design and manufacture according to supplied designs presented or patterns, tools up to a size of 1200x4000 mm and a weight of max.25,000 kg. State of the art production facilities make it possible to edit the design in 3D CNC-controlled production to initial sample inspection reports on 3D measuring machines, virtually any data and drawing documents. Years of experience and a largely self-trained staff allows us to implement safe production of complex tasks in the situation. Precise milling and wire EDM in air conditioned rooms give us the opportunity to manufacture cutting tools with an average gap of less than 10 microns. In series production, we rely on machining centers manufactured by Heller with a pallet changer. With speeds up to 16,000 min-1 and rapid traverses up to 90m/min and aluminum parts are to be machined economically Jigs and fixtures * Welding equipment * Benders * Drilling, milling and turning device * Testers * Handling Systems Another mainstay is the manufacture of devices for the mechanical manufacturing, welding machining and measurement and testing tasks. Certified welders ensure a stable basic structure, annealing furnaces for stress-free post-processing, and milling machines up to 5 axis for precise stop points in space. Modern 3-D coordinate measuring machines also help in free-form surface area to verify the accuracy measure to record and document. Contract Manufacturing CNC milling CNC turning CNC Surface Grinding CNC Wire EDM CNC sinker EDM Conv machining Welding Heat treatment Measuring and testing

RASTR-V´s roots go back to year 2006, when founder started to work in small workshop, producing metal parts. Neraly 15 years of hard work has gave rise family engineering and manufacturing company in Middle-Czech Region, Czech Republic. We design and produce upon customers requirements parts, special tools and purposeful machines. From one single piece up to large series. Working machines : - 1x CNC Turning - 4x CNC Milling - 1x standard milling machine - 1x standard grinding machine - 2x standard turning machines - Welding parts and construction (MIG/MAG, TIG/WIG) Do you need more information? Do not hesitate to contact us. On behalf of RASTR-V Jaroslav Vožeh

In the field of mechanical manufacturing, we sin supplier for a variety of applications. We offer customized and cost effective solutions to your manufacturing problems. Our team has excellent experience in the production of individual parts, small series and assemblies for vacuum systems of the thin-film technology, microelectronics, electron beam technology, special purpose machines of the general mechanical engineering. Revision of steels and materials that vakuumtechn. Requirements (eg, V2A, V4A, Inconel, Monel, bronze, copper), aluminum plastics such as POM, Ertalon, Peek, PTFE etc. Production of small recipients and chambers of the UHV and HV technology Performing welding operations, the vakkumtechn. Satisfy requirements such as leak rate, discharge pressure and pressure test.

ProMechanics Ltd manufactures high-quality machined components and provides assembly services for a variety of industrial sectors in Finland and abroad.

The OLS GmbH was founded in 2001 in Budapest. After a short time the company has achieved in Budapest and Hungary by its good quality and flexibility of a large degree of popularity. In collaboration with an East German company, we also supplied for many years German engineering companies to their full satisfaction. We have a small, highly motivated, technically well qualifed staff and modern machinery. In the management and in the construction we have mastered in addition to the Hungarian language and the German language. We manufacture for you from a simple laser or flashings to complex welded assemblies made of steel, aluminum and stainless steel. Philosophy Our goal is to meet the requirement of the customers 100%. Quality, flexibility and individual solutions are self-evident for us. Only a coordinated single process from design to completion guarantees a good end product. Our main business activities are the production and distribution of • simple sheet metal parts to complex sheet metal assemblies • welded assemblies • Steel, stainless steel, and aluminum. We design and draw with the 3-D/2D-Konstruktionssoftware Solid Edge. The OLS GmbH produces a 1,300 m2 production area with modern laser -, punching, and bending technology. In collaboration with long-standing partners, we also provide • Powder coating • Liquid Coating • burnishing, plating, hot-dip galvanizing on. Also, the transport of your products we manufacture is organized and executed.

CNC TORQUE * CNC MILLING MACHINES Turned parts, milling parts from Lutex: Low-cost. Durable. Reliable. Dear Ladies and Gentlemen, Company Lutex manufactures parts quickly and economically just-in-time: according to drawing, From prototypes to series, from CNC turning parts to CNC milling parts. Qualities with which I convince: • High flexibility, even with short-term inquiries • Reliable customer service: from quotation, through to production and delivery • Cost-effective production with high quality The accompanying company brochure gives you an impression of my performance spectrum. One, I hope, positive impression, which I at a personal discussion or equal at A first order. You will find conditions on request immediately. CNC machines: CT 20 Gildermeister - turning D180mm L = 250mm / small series from 30 to 10000 pieces NEF480 Gildermeister - turning D480mm L = 1000mm CNC strojtos - milling - x = 500 / y = 320 / z = 360mm Lathe new - D500 / L1500 Gallery realization on: www.lutex-metale.eu Best regards, Lucjan Bulenda

As an efficient partner for your success, HEWI offers broad-based expertise along the whole route to your product, from the initial development through to series production. Your vision: From the design to the series product • Starting with a model or a drawing • Transfer into our 3D system – Siemens NX / CATIA • Design of the product as an economic injection moulding • Rapid prototyping • Material selection and testing, strength calculations • Working through requirements specifications – preparation of performance specifications • Design FMEA Your requirements: Comprehensive project planning • Definition of all specific characteristics, requirements and quality objectives • Preparation of a production plan: Logistics from raw material through to delivery • Advance quality planning, process FMEA, test & inspection planning • Definition of all resources, supplies and auxiliaries required • Purchasing, installation, enabling, training, process validation • Comprehensive project management: Customer requirements, scheduled dates/deadlines, costs Injection moulds • Fill analysis with Mold Flow: analysis of weld lines and stresses • Selection of the ideal mould concept • Thermal analysis of the product: distortion and dimensional stability • Mould design in 2D and 3D • Definition of the required process monitoring: sensors and scanning systems such as HB-Therm Flow or Kistler pressure sensors • Mould production in Germany or with worldwide partners • In-house mouldmaking From the preliminary sample through to series production • Product support from the first-off tool parts until handover to series production: tests, samples, changes, assembly trials, automation • Verification of process capability • Comprehensive testing options due to in-house laboratory and measurement & test room • Revision of the process FMEA: Feedback to the design phase • Clearing and start of series production: Presentation of the initial samples with test reports Company facts & figures • More than 70 injection moulding machines: 22 to up to 1600 to (DEMAG, Ferromatik, Arburg, Engel, Krauss-Maffei) • 550 employees • Our own brand products and manufacturing of different engineering plastic products • Automation: articulated robots, linear equipment, dying equipment, driers, assembly lines and assembly machines • Production methods: standard injection moulding, 2 and 3-component technique, mono sandwich, gas injection technique, moulding in inserts made of steel, plastic or electronic parts, in-mould decoration of films using the „SKIN LINE“ process • Production of high-quality surfaces: painting/enamelling, electroplating and coating with partner companies • Assembly of subassemblies, welding of plastic products, printing and assembling through to the finished sales packaging • Delivery to the customer: Use of different container systems and worldwide delivery Certified quality • Certified by EN ISO 9001:2015 • Environmental management by EN ISO 14001:2015 • Medical devices by EN ISO 13485:2016 • Energy management by EN ISO 50001:2011 HEWI Heinrich Wilke GmbH Bereich Kunststofftechnik Hagenstr. 2 | 34442 Bad Arolsen-Mengeringhausen | Tel.: +49 5691 82-735 | Fax: +49 5691 82-712 | info@hewi.de | www.hewi.com

Hügen & Lange offers you an extensive range in the field of thermoplastic plastics technologies. We manufacture injection molded parts for you in series production, support you in the development of tools and let our tool designers develop them to the finished series part. The tools are maintained and repairs carried out in our own tool shop. In addition to series production, we offer extensive services in series assembly. We help with the development of assembly machines, we also have them built according to your wishes in certified specialist companies and are at your side with a lot of knowledge and competence. With the highest Industry 4.0 standard, we offer paperless and glass production. All data is recorded digitally and can be made available in real time at the customer's request. We are also a DIN ISO 9001: 2015 and IATF 16949 certified company. We always keep our finger on the pulse and know about the continuous change of the market and the technical possibilities. In order to support you in your plans and projects, we offer you extensive and individual customer service.

Since 1997 our company serves to its customers in the sheet metal industry associated with perspectives such as high level of quality, flexible solutions, and rational price strategies. We have strengthened our corporate identity by using the advantages of innovative, flexible, and success oriented management style. Making accurate investments at the right time turned our company into one of the companies who is well known and admired in the industry. The company is based in Istanbul Beylikdüzü Industrial Area in 5.500 meter square production field. By using its experiences, corporate structure and flexible solutions Sarimet exports sheet metal parts to FRANCE, ENGLAND, GERMANY, SWEDEN and SWITZERLAND for more than 8 years. By using CNC Laser Cutting, Punch Cutting, Bending, Profile Bending, Roll Bending, MIG and TIG welding, Profile Cuttings, Perforated Cuttings, Guillotine Cuttings, Assembly and other sheet metal processing tools, we can supply a lot of services to our customers in just one place. Reviewing the current customer portfolio, we can define our basic customer identity as Machine Producers, Industrial Shelf Producers, Server Cabinet Producers, Elevator Producers, Industrial Kitchen Cabinet Producers, Automobile Suppliers, Industrial Air Conditioning Producers, Rack Cabinets, Personal Safe Producers, Metal based Storage producers and so on, As a consequence of high level experiences that have been accumulated since its foundation, Sarimet evaluates the expectations of its clients correctly. We make difference for our clients who have top-end demands from its supplier. Today Sarimet continues its rapid progress by a vision that takes into account of the deficiencies in its sector. As a company who attributes its success into its clients, we are working harder in order to answer your demands by high quality products, appropriate prices, and quick services which are hard to find in one place. We would be glad to do business with you in order to satisfy your challenging expectations.

Laser Style is a European supplier of sheet metal fabrication and precision sheet metal components and many different metal products. We are specialized in the processing of various metals - black steel, stainless steel, aluminum. We have experience and complete equipment for metalworking and manufacturing precision metal components, metal parts and metal products. Laser Style has a new generation of TRUMPF laser machines for cutting different thicknesses and types of metal - black steel, stainless steel, aluminum. Laser Style is a manufacturer of commercial furniture and commercial equipment for pharmacies, hardware stores, metal shelves for TVs, cosmetics stores and more. We manufacture various metal fire boards, cabinets, boxes, metal wardrobes and cabinets. We have a variety of bending tools that allow us to offer short lead times for the production of various specialized products at competitive prices. This allows us to bend complex shapes, different thicknesses of different types of materials. For our customers' finished product, Laser Style can offer them a precise and durable powder coating. When it comes to custom sheet metal fabrication assembly and custom sheet metal parts, we offer a complete range of full in-house assembly services as a value added service. We have the latest generation Laser Marking Machine for Metal Marker Plates, Tags, Cable Tag, Marker Plates, Stainless Steel Cable Labels Tags.

Demanding solutions in metal and plastic machining Your specialist for industrial service. Creation of technical drawings. Advice and service from the idea to the finished product. We convince with Made in Germany quality

The Binder GmbH conveyor system is a flexible family business, designed and implemented since 1971 with innovative ideas individual solutions. The company offers the entire range of services to modern materials handling and care of you even after commissioning of the plant. The service starts with the design, via design, manufacture and installation of complete production facilities to production of special machines and training the customer's employees. Furthermore, the Binder also performs the expansion and modernization of your existing system. The approximately 60 employees / inside are all experts in their field. Because of the efficient structure within the company, we are able to react flexibly to your requirements and to achieve best quality at high delivery reliability. For optimal order processing. Furthermore, we do contract manufacturing in the field of welding, Machining and turned parts. For solutions on the move.

We offer solutions from a single source: - Mechanical engineering - Manual, pneumatic and hydraulic clamping devices - Assembly equipment and devices - Testing systems for geometry, tightness, flow - CAD design (Autodesk Inventor and WSCAD) - Control technology (Siemens Simatic and others) - Item production

With our modern machine park, our skilled operators will be able to produce a product to individuel specifications. Whether you need pressed or formed parts, special hinges or ties from iron or high-quality steel - we always do our best to meet your needs. A wide range of surface coatings are also available to provide special effects. We also offer the retail trade a complete programme of high quality fittings and hardware. We are able to deliver promptly, even in large quantities. We are pleased to help you when it comes to selecting the range of products you wish to offer, and we can also advise about presentation, and provide product displays to meet your specific needs.

We are a family company, founded in 1927 in Bologna, the heart of a mechanical and motors region, and specialized in the constructions of mechanical components following customer drawings. Thanks to our web of Italian partners, including high quality aluminium and cast-iron foundries, we can offer a “Turn Key” service, starting from the purchase of raw material until the supply of parts ready to be assembled. We also care about heat or surface treatment and painting. We manage internally dimensional controls, eventual leaking tests and certificates raising. We already work with international groups as Toyota, Alfa Laval and General Electric, on different European and American sites. Please do not hesitate to contact me for any further question You may have, we would be happy to receive Your drawings for any quotation or to have the possibility to visit You. Thank You again for Your time and Your attention.

Gronbach has been developing and producing components and complex assemblies on a production area of over 20,000 m2 with 290 employees since 1964 and has also specialised in the processing of stainless steel and aluminium, surface finishing and plastic injection moulding. In addition, a separate department is dedicated to the development of new surface technologies, manufacturing and assembly processes. The core competencies of the Wasserburg site are in the following areas: Metal processing (bending, milling, deep drawing, drilling etc.) Surfaces (anodising, powder coating, printing, laser engraving) Plastics technology (hybrid, back-moulding) hybrids instrument engineering development work PRODUCTION TECHNOLOGIES AND PROCESSES In the area of production technologies, we have specialized primarily in the surface refinement of stainless steel and aluminum, the production of functional and visible components as well as plastic injection molding and adhesive technology. These technologies form the basis of our equipment technology, but are also offered by us as individual services. We are constantly expanding and renewing our portfolio with new combinations of technologies and materials, e.g. in the art of back-moulding metals such as aluminium and stainless steel with different plastics, in order to be able to offer our customers high-quality and cost-optimised manufacturing processes.