In 1982, Peter Sedlak, the CNC machining technology with an employee and three machines in Schwäbisch Hall. Were produced turned parts in small and medium-sized batches. Over the next few years, additional machines were added. The number of employees rose steadily. An increased demand for pre-finished parts made the first purchase of a conventional milling machine and a CNC machining center later inevitable. So it was always close in the rented hall and the desire to own a larger hall and getting stronger. In December 1991, finally, the company moved to Untermünkheim-Enslingen so that in January 1992, production could be included in the new hall. The economic downturn slowed in subsequent years, the growth of the company. But it soon went up again. Until 2000, all machines were replaced with new, more modern. In 2000, the certification according to DIN EN ISO 9002 was carried out. As of January 2002, the company operates under a new name. Peter Sedlak and his longtime collaborator and master Friedrich Schiele founded the Hohenlohe precision parts GmbH. Today, 12 employees produce pre-finished parts and assemblies for many satisfied customers from different industries. Various grinding work, as well as heat and surface treatments we have them implemented by competent and reliable partners. The reward for good quality and very little complaints are our satisfied customers.

Established in 1999, and previously part of 1 of 6 plants in Slovenska Armatúrka Myjava. We produce according to customer´s drawings turning parts. We have single and multispindle automats and CNC lathe machines, working with brass, steel, and stainless steel. Mass production is for parts from diameter 3 mm up to 14 mm and other parts up to 51 mm. Long parts we do on CNC sliding head machine_Citizen up to diameter 20mm. We produce parts for all branches of industry.

We, Lorenz Elektromotoren und CNC Fertigungstechnik GmbH in Sandhausen, are a family business that has specialized in the repair of electric motors since the company was founded in 1989. Since 2012 we have also covered the area of CNC production technology and are therefore able to manufacture spare parts ourselves and to respond to the individual needs of our customers in the best possible way. In order to be well prepared for the future, we have invested a lot: In 2014, Lorenz Elektromotoren und CNC Fertigungstechnik GmbH moved to a new, larger hall in Sandhausen on Gottlieb-Daimler-Strasse. Today, Lorenz Elektromotoren und CNC Fertigungstechnik GmbH is a specialist in the repair of servo drive technology. Thanks to many years of experience and constant further training measures, our currently 14 employees have extensive knowledge and can therefore help you competently and as quickly as possible at any time.

Ezz39 works closely with several Italian companies operating in key sectors of the mechanical industry, with a strong focus on precision machining. A significant part of our internal organization is dedicated to managing subcontracting projects in the DACH area (Germany, Austria, Switzerland), where we act as an active partner, not merely as intermediaries. Your Single Point of Contact – From Quotation to Delivery We oversee every step of the process: from the initial technical and commercial quotation, to negotiation and order management, through to logistics, quality control, and after-sales support. We ensure smooth communication and coordination between the customer and the supplier, offering full support on both the technical and commercial sides. Directly Mandated by Italian Manufacturers Our role is based on direct mandates from Italian manufacturers who have entrusted us with representing them on a full-time basis in German-speaking markets. We do not work on commission, but under a fixed arrangement, with the goal of building stable, long-term business relationships. Our Mission We work exclusively with companies that share our values, vision, and expertise. Our objective is to establish long-lasting and reliable partnerships, built on: 1.Experience 2.Technology 3.Versatility 4.Flexibility 5.Reliability 6.Punctuality We are ready to offer you the best technical and commercial proposal, supported by qualified and structured suppliers, to help you become truly competitive in the European market.

Our company was founded on many years of experience in the field of plastic processing of metals. The main profile of the company's activity is welding services in the field of MAG, TIG, MMA welding of steel and aluminum, their plastic processing and CNC milling and turning. We carry out details in accordance with the technical documentation submitted to us. We have high-quality technological assistance, we use both proven solutions and the latest technological innovations. Our services are mainly used by western companies that produce medical and rehabilitation equipment and facilities. Many years of experience working with many customers allow us to professionally support new recipients at every stage of the implementation of next projects. We achieve our quality goals by continuously modernizing our machinery and increasing the qualifications of our employees. We guarantee professional service, reliability and high quality of the services we provide. So that our welding services could meet the expectations of even the most demanding customers, we bought one of the most modern robotized sites in Poland. We also offer CNC milling services to our customers. The CNC milling process is carried out on machines from the German brand Chiron in the High Speed series. The CNC turning services are carried out on numeric machine tools. We use numerically controlled bending machines, hydraulic and eccentric presses to plastically process the materials. As part of the complex service, we also provide assembly services for the elements manufactured by us, using over two hundred thousand different fasteners. We process seventy-five thousand kilograms of steel and three thousand kilograms of aluminum materials. Our production and warehouse area exceeds five thousand square meters. Short movie on Youtube https://www.youtube.com/watch?v=0njejtIkRyU

PREFAG has been located in Walzbachtal for more than 65 years. We are a strong partner as a supplier in sectors such as industry, medicine, aviation and automotive. Our qualified expert team actively supports customers and suppliers in the development of new components and assemblies. The complex and miniaturized turned parts up to ø30 mm are our core competence. We have innovative strategies and a high level of vertical integration in the manufacture of short and long turned parts - including further processing, eg heat and surface treatments.

Womet is a Polish company operating in the metal industry since 2004. The basis of our activity are accessories and devices for the energy, construction, agricultural and shipbuilding industries. The dynamic development of the company has influenced the expansion of our production and service activities, thanks to which we significantly stand out from the background of Polish producers.

We are service providers in the metalworking sector. We manufacture components for machine building, tool making and vehicle construction build the finished components eg. as devices also together. Our manufacturing capabilities include milling, turning, wire EDM, Waterjet cutting, surface grinding and laser deposition welding. Lot sizes of 1-500 pieces are not a problem for us.

What one associates with us:

APP automation GmbH presents itself as a powerful company in mechanical and plant engineering based in Eschbronn and operates in a goal-oriented and close to customers. Our strengths lie primarily in demand-oriented and user-friendly complete solutions. Also in our program: Manufacture of components for special machines. We specialize in special and standard solutions in the area of automation. As a specialist in mechanical and plant engineering, we monitor every development step from design to installation in the house APP.

Wecotech AG contract manufacturing is an innovative and leading company in the field of CNC machining. The basis for success and the driving force in our company are our employees. Together we pursue the goal of being at the forefront in the field of CNC machining.

AVL SCHRICK Performance Components GmbH is part of AVL — the world's largest independent technology partner for the development, simulation, testing and manufacture of powertrain systems. AVL SCHRICK Performance Components GmbH is a comprehensive manufacturing center within the AVL family. Here, both cubic and rotary highly complex high-performance components are manufactured and delivered in the range of prototypes and small series to the entire automotive industry and other industrial sectors. AVL SCHRICK Performance Components GmbH, is the center for the machining production of complex, high-precision performance components for hypercar innovators, automotive OEMs, industrial, racing and tuning customers. Innovative workpieces are the core competencies of our high-tech factory. With over 50 years of experience in camshaft production and decades of expertise in milling engine block and cylinder head assemblies as well as various other powertrain components, we are accompanying the transformation into the mobility of the future. Whether prototype, single part or small series production: Our manufacturing solutions set standards for efficiency, flexibility and quality. In doing so, we are proud to not only form components, but also partnerships.

For over 30 years, we deal with the editing and production of finished precision parts from all common materials, and components and complete devices. After we have expanded our machinery continuously over the years and modernized, we are now able to offer a very wide range of processing options in the field of machining precision parts manufacturing. Our small, medium and large series production covers an area 3-65 mm diameter of the rod in complete machining (Axial - radial and tool support) as well as the range up to 600 mm diameter in food processing. We manufacture according to your drawings or samples in batches of 10 pieces, including patterns and 0-series, to 100,000 units. For over 20 years we have manufactured parts for rotary connector systems. Our manufacturing facility in this area has been designed according to the requirements for the production of such parts. We offer our customers the opportunity to purchase fully pre-finished parts, including surface treatment, assembly of components to form units and a customizable delivery, tailored to further processing. We have carried zoom requirements, evolved in this area in recent years, according to our customers Interressenten and strengthened us to a system supplier. Devices, special tools and special equipment are coordinated and adapted to the particular processing task, created by ourselves, so that a possible production to optimum, efficient and economical points of view can take place. For the control of these special facilities we have collected from the use of freely programmable PLC controls extensive experience and knowledge of the use and programming of such. A computer-aided quality management system, we have installed and are thus able to document inspections during production. We try to meet the different requirements and demands of our customers to be able to fulfill in every respect. The parts manufactured by us find application in diverse industries. Essentially, these are the automotive industry with its direct suppliers, the electronics industry and switchgear manufacturers, producers of aggregates and systems for gas and control technology and the general mechanical and plant engineering.

Tessari Luigi & C. snc was established in Soliera in 1978 as a grinding plant for the mechanical industry, a sector in which the previous owner had acquired considerable experience. Over the years, the company has built up a solid portfolio of customers for which it grinds parts for hydraulic systems, a field where it continues to excel. In 1992, the company was acquired by the current owners who, while maintaining the same business name, decided to develop the service provided to the customers to a further extent. So much so, a turning department was added in 1996 and the company moved to its current headquarters owing to the need for more space. We are specialized in machining HYDRAULIC COMPONENTS and our long-standing customers are leading enterprises in this sector. Since our organization is so flexible, we can adapt to the customers’ specific requirements and ensure prompt, timely deliveries. On-going technological updating and constant attention to the customer, always considered a business partner by the company, are the strong points of Tessari Luigi & C. s.n.c.

Versatility - through years of experience and openness to new ideas. Today MOUNTAIN METAL OHG was founded in 1980 by Mr. Alfons Berg as a sole proprietorship. In 1994 the opening of a branch factory in Oberwiehl and thus the expansion of the power spectrum in sheet metal processing. The establishment of a partnership made in 1999 by the introduction of the individual enterprise and the participation of Mr Andreas Berg, who since 1993 has been an employee of the company. Managing Partners are Alfonso and Andreas Berg. Dedicated and technically skilled staff, supported by a powerful technical equipment enable quality and on-time reliable results that meet the individual requirements of our customers. With the sum of our experience of over 30 years, creativity and flexibility, we develop optimized overall and advanced detail solutions. Robot Welding Welding Welding Robot welding welded constructions sheet metal forming sheet metal processing milling turning machining sheet metal structures large milling parts assemblies burnouts combustion engine burning operation Abkantarbeiten cut profiles industry profiles structural steel welding welding TIG MIG MAG Stud Welding Drawn Arc Capacitor discharge machining stainless steel engineering tool steel plasma cutting plasma system plasma cutting parts sheet steel processing 16Mo3 Hardox 1.4301 1.4571 1.4404

Röchling Industrial Laupheim GmbH, based in Burgrieden/Germany, specialises in the machining of CNC turned and milled thermoplastic components within the Industrial division. The great strength of Röchling Industrial Laupheim is the machining of sophisticated precision components. We manufacture high-precision finished plastic parts with very tight tolerances according to your specifications. Whether prototype or series production: Our employees work on the most modern CNC machining centres. With this expertise, Röchling Industrial Laupheim (formerly Fischer GmbH Kunststoff Präzision) has stood for precision components made of thermoplastics for more than 55 years. This ranges from professional advice on the development of components and products to the selection of the optimum material for the respective application and practical assistance with detailed solutions.

IV Metall is an owner-managed, independent company. The location in Nachrodt-Wiblingwerde in Sauerland characterizes a traditional, regionally producing but also a modern, globally operating company. Our benchmark is the market with its requirements The main area of responsibility lies in the design and manufacture as well as in the trade of technical springs of all types. From layout and calculation, to sample delivery and series, including all the documents required by the customer, delivered in the packaging you require. We earn the trust of our customers through the quality delivered and the service provided. This gives us the chance to win new markets. Traditional values determine the behavior of management and employees. Mutual trust, fairness, respect, reliability, honesty and personal responsibility are company philosophy and lived reality. We are aware of our responsibility and obligation to our employees, business partners and market participants and aim to continuously develop the company, to maintain the company's innovative strength and to ensure the social security of our employees. The result of our good work should not be defined solely by the increase in growth and prosperity, but we also want to burden our environment as little as possible and be socially committed.

We would like to introduce ourselves here as a competent partner for equipment engineering and supplier of devices and special machines. In our engineering team, 7 engineers and technicians deal with solving problems from product development to tool design, device design, equipment, handling and assembly to commissioning. Modern machines and competent specialists are available for the production of parts and the assembly of devices and systems. We have a wealth of experience in the fields of automotive engineering, electrical engineering and medical technology. Using this synergy effect, we can familiarize ourselves flexibly and quickly with your problem areas. Our development team has more than 30 years of experience in the construction of equipment and special machines, but we are also the right contact for pure contract manufacturing. Let us know your wishes!

For many well-known customers, JP-Industrieanlagen has been the Partners for solutions. We are a national and international company in the field of special machine construction, automation technology and contract manufacturing. Everything from a single source and with the highest precision and reliability. Our delivery portfolio: • Contract manufacturing, parts to be machined according to drawings (build to print) • Construction and construction of assembly aids, assembly devices and clamping devices, • Construction of base frames, frames, consoles, turntables for robot cells • Turning and milling in our own turning and milling centers • Welded constructions for the highest demands • Welded constructions for static and dynamic loads according to DIN EN 1090ff EXC 1...2 / ISO 3834, for black steel, stainless steel, aluminium. • Large part processing • Optical measurement and testing • Construction • Engineering • System integration • Assembly • Services Your advantages with us as your partner at your side: From the first consultation to the realization of your project, JP-Industrieanlagen GmbH is your partner for solutions. .• From the first consultation to the realization of your project, JP-Industrieanlagen GmbH is your partner for solutions. • We offer you alternatives for cost-effective production/implementation of your production orders. • We support you in reducing costs and adding value to your production. • We also automate your manufacturing and assembly processes in the context of Industry 4.0 • We are a full-service provider and deliver everything from a single source, independent and flexible, not tied to a specific manufacturer.