Welcome to the Kempten iron foundry Adam Honig AG. We produce high quality casting products in the cast iron materials cast iron with spheroidal graphite (DIN EN 1563) and cast iron with lamellar graphite (DIN EN 1561). Our products are used in the industries of machine tools, textile, printing and special machine construction and in the area of rail vehicles, in the energy and wind power plant construction, power transmission, the oil industry, the pump construction, the engine and the automotive vehicle. More details can be found on our website under www.ke-ag.de. Casting qualities: EN-GJL-150 to -350 and DIN EN-GJS - 400-15 to -700-3 Casting: - Machine molding (sand green) - Untouchables form of investment bale size 500 x 650x 300/280 mm - Turning molding plant box size . 600 x 600 x 350/300 mm to 900 x 1.200x 400/450 mm - Furanharzformerei with unit weights . from 1 kg to 8500 kg and box sizes up to 4,500 x 3,000 x 2,500 mm Melting furnaces: Electric Melting Shop: - Two ABP center frequency Tandemschmelzanalagen connected in parallel with each * 2 furnaces á 3000 kg capacity * 2 furnaces á 6000 kg capacity - Fully automatic, computationally-controlled Gattierungszusammenstellung - Melting process center computer with process-integrated melting and analyzes evaluation Measuring / Testing: Metallographic and metallurgical material tests, spectral analysis, mechanical tests, such as hardness, train and notched impact test; destructive tests such as ultrasound and crack detection using the dye penetration, hexagon measuring machine (three-coordinate measuring machine). Heat treatment: Stress relieving, annealing, microstructure treatment. Color treatment: Coating with 2-component coating in electrostatic paint spraying Diving system with one component varnish Mechan. Processing: Part and finishing Additional services: Design and materials consulting, and in cooperation with the Fachhochschule Kempten setting and voltage simulation (Magma)

On our precision and quality you can set. We offer a broad, comprehensive portfolio of technical feathers. Thanks to our flexible manufacturing capabilities, we are able to produce your individual components. Whether it is flat spring components or complex three-dimensional curved shapes of wire and strip steel - we produce the optimal solution for your claim. No matter whether you need a one off, a small, medium or large series, Search or advice in the preparation of prototypes. Make our many years of experience to your direct benefit!

MEDA GROUP has been providing services to Turkish and global industries in the steel structure, machinery and equipment production field for more than 25 years.  Specialized in the production of components for crushing and screening plants, tunnel boring machinery (TBM), concrete plants, and heavy-duty and construction machinery, MEDA GROUP offers technical solutions to many firms that play a leading role in the design, production and assembly of steel structures, machinery and equipment projects.  With its production plant in Ankara, which has a floor area of 3,600 square meters, and having successfully completed local and international projects as a solution partner with its 50-strong specialized staff, MEDA GROUP is one of the few companies that have managed to combine an innovative and competitive strategy with sustainable quality.

De Marchi Engineering is a UK based family run business. We are Sub Contract manufacturers making use of the latest manufacturing technology. Laser cutting, Bending and Welding.

For over 50 years we have a medium-sized, independent company combine expertise for the product with innovative spirit and high flexibility in production. Wherever weseralu - profiles are found, their use is preceded by an intensive dialogue, individual development and a precise manufacturing. And in the quality we never make compromises. Thus, we are well positioned for the varied requirements of our customers. Long-term trusting business relationships are a testament to our reliability and fairness. We are happy to provide this in a cooperation with you to the test.

Single part production, presses, forging hammers, repairs of all kinds, on-site processing of large machines

Our core competence is the production of castings and extrusions made of aluminum with high demands on quality and precision. Cutting-edge technology, designed according to the latest equipment and a motivated team of experienced specialists guarantee an effective and efficient processing of orders. We are certified to ISO 9001, environmental management standard ISO 14001 and automotive standard ISO / TS 16949.

Our company was founded in 1960 by Edgar and Edwin Engesser. From the outset, it is our endeavor to offer our customers maximum reliability and utility. Therefore, it is no coincidence that we can already look back on a very long relationship with many customers. Edgar Engesser was over 40 years always competent partner of our customers. During this time he put our company on a solid foundation on which we can safely grow today. With Arno Engesser 1998 is already the third Generation occurred in the management. Thus, a continuity is guaranteed in our development, which ultimately affects the satisfaction of our customers positive. His thorough training as a toolmaker and then as a graduate engineer of precision engineering ensures that our customers expert advice on the pure turning out. Today we are proud that we form with our approximately 10 employees a team in which everyone knows exactly where and when it is to tackle. We are convinced that these are the most important factors to be able to inspire customers. The constant focus on the needs of our customers and aim to provide reliable and best performance to satisfy demanding customers happy, we have sound to today's performance since 1960 and allow future-oriented growth.

DJC specialise in CNC turning for automotive and industrial application. Technical components including treatment produced from stainless steel, steel, aluminium and brass. Single and multi spindle machine suitable from 500 to millions of part. Machine shop with hight tech machine able to finish component from one single operation. Integrated with metrology laboratory. ISO TS16949.

The AZ Factory is your source for waterjet cutting, CNC turning, CNC milling, manufacturing of welded assemblies and assembly. We supply from prototypes to series from a single source and provide maximum availability and flexibility with high precision and punctuality!

At first glance, Fischer System-Mechanik is a completely normal supplier specializing in the production of high-precision series parts and assemblies made of stainless steel and aluminum. Processes used are machining technology, turning and milling, CNC technology and CNC measurement technology as well as the assembly of assemblies. And at second glance? At Fischer, 70 employees work strictly according to the principles of synchronous production, i.e. according to the Toyota principle.العناية بالبشرة And this is precisely the reason why working with Fischer could be exciting for you too. Like most companies, you've probably wondered why, even though your inventory is constantly growing, the exact parts that you need so urgently are always missing.ماسكات للبشرة الدهنية you know that? Then take a look here to see how your company can benefit from working with us.

Altay Steels Limited specializes as a wear and heat-resistant OEM spare part manufacturer. Our current production includes crushing rings, pressure rings, wearing plates for the cement industry, and grate bars for the energy sector. We take pride in being an OEM spare parts supplier to industry giants such as Claudius Peters Projects, Babcock Wilcox Volund A/S, Stadler Stahlguss A/S. Allow me to provide some insights into our label and facility: Our facility spans around 2,500 m² and has the capacity to reach more than 100 tons of casting per month. Our production team is highly experienced in the sector. Furthermore, it's worth noting that we possess comprehensive knowledge in manufacturing armor plates, clinker lining and cooling plates, hammers, and chain links using various materials. If you have any inquiries or if there's additional information you require, please feel free to reach out. We look forward to the opportunity of potential collaboration.

...since 1954 active worldwide as one of the leading system suppliers in the service of health. With a complete range of products and services for everything to do with sterilization and disinfection systems for hospitals, scientific institutes, laboratories and the pharmaceutical industry, MMM has positioned itself as a key quality and innovation leader in the German and international markets. 1200 employees are committed to the overall mission of the MMM Group with competence and joy. In our production plants in Stadlern, Bavaria, and in Brno, Czech Republic, we manufacture products that are tailored to the needs of our customers around the world. With both production sites, we ensure a high level of vertical integration and thus meet the enormous quality requirements of the medical technology industry.

Officina Meccanica Cassanese Ltd. is a small company with 23 employees working in the field of subcontracting, from nearly 50 years. We produce precision metal parts, by the customer's technical drawing. We have about 40 machines used for the turning and 4 vertical machining centers for milling. We work every type of ferrous material (AVP-AISI-SPECIAL STEEL) and non-ferrous (brass, aluminum, plastic). The target sectors of our products are: automotive, industrial, power, railway, hydraulic, furniture and more. We are able to provide all superficial treatments, when required. We are certified according to the new UNI EN ISO9001.

CNC-Technik Lapp GmbH is a young and flexible company that has modern manufacturing technologies. The range of parts includes both simple components, but extends to sophisticated and complex assemblies. Especially when it comes to innovative and economical solution concepts in CNC machining, we are at your side with our technical know-how and our technical expertise. And our lean and efficient structure enables us to process quickly. In this way we guarantee a short response time and the flexibility we need to realize even the tightest of deadlines.

We carry large parts machining with up to 15t. With the help of our technically gifted and qualified staff, we work very efficiently. Our company is a modern, specialized family, combines tradition with modern computer technology. Thus we are an efficient, reliable and affordable partner for machine and plant engineering.

Supplier of metallic and non metallic turned and milled parts as well as preassembled an final assembled assemblies.

For over 45 years Wissler & Rademacher offers customized solutions from zinc die-cast range. In 1991 the newly-occupied corporate buildings we manufacture approximately 5000 sqm with qualified and motivated employees in multiple shifts.

The work of the company is focussed on the Development, Production and Sale of high quality cast metal parts for well-known industrial companies all over the world. Export sales make up over 50% of the company's turnover. Our customers include the major manufacturers of passenger cars, utility vehicles, engines, transmissions, axles, hydraulic systems and heating systems. We produce a wide range of castings in various material grades (grey iron 15-30, EN-GJL-150 to 300) – from non-alloy to high alloy – cast iron with nodular graphite (ductile iron 40-70, EN-GJS-400-18RT to 700-2) and cast iron with vermicular graphite (CGI 400-500) in the weight ranges of 1 kg to 1800 kg.