Specializing Hanel has to tooth flank precision ground gears. The module area extends from module 0.5 to max. Module 7, the outer diameter of 400 mm max. finished gear teeth, 360 mm tooth edge honed over a wheel width of 150 mm. The front wheels can be made straight or helical teeth in High Quality 5 in series-production conditions. The preamble spur encloses course, the whole tooth types such as splined shafts, sprockets, helical gears, timing belt pulleys, internal gears, etc.

We are your competent partner in the field of metal cutting. Our special focus is on milling technology. The cheapest way we produce what in the lot size range of about 10-10000 piece. With very extensive experience in machining, clamping technology and assembly, we ask ourselves to you as a supplier for machined components and assemblies manufactured before. We can advise you and are pleased to provide you with our performance capabilities. Power spectrum ● Production of machined components produced from all popular as well as exotic materials on CNC machines. Milling in the standard: up to 600mm in length and 400mm width (it can but larger components up to 800mm x 600mm to be processed) Shooting: up to diameter 300mm and length up to 1000mm ● Assembly and production of complete assemblies Our strength lies not only in the production of individual components in series, but also in the manufacturing of complete assemblies including surface treatment and assembly. ● We get everything out of your parts - if they let us Besides the pure manufacture of your products, we also offer assistance in the design and complete engineering, for example when it comes to wanting to present to produce components of your portfolio more cost effective. Often there are several reasons that can make a cheaper component, without the be sacrificing accuracy and functionality needs. ● We make your components durable Highly stressed components hold only if all parameters are correct.To this end, choosing the right material is crucial. We are happy to advise you. ● surface finish, such as hardcoat, anodized and PVD coatings Also in terms of wear protection by coatings we have an extensive knowledge and working with well-known companies together Potential Coatings: - Hardcoat coatings on aluminum alloys - PVD and CVD coatings in multiple layers - Anodizing technically and visually in different colors - Galvanic and chemical surfaces technically and visually

COMPANY ESTABLISHED IN 1964 BY JEAN M.MOREL AND RECOVERY IN 1990 BY CHRISTIAN M.MOREL evolving BY ITS WORKING TECHNIQUES AND ITS FLEXIBLE WORKING HOURS SO ITS possibilities TO RESPOND TO REQUESTS FOR ITS CUSTOMERS.

The company ZAL Zlievaren Al GmbH was founded on 03.11.1993 and registered on 28.01.1994 in the commercial register. The casting of Al alloys is in the premises of the company since 1963 tradition. The company is mainly oriented to foreign business customers whose production volume is between 60-70% a year.

At a glance Manufacturing technology Form of castings made of cast iron with nodular graphite, vermicular and flake graphite, SiMo-alloy cast iron and austenitic grades of cast iron Complexes, core-intensive castings primarily for the automotive industry Production Program - Exhaust manifold, turbocharger housing, supporting brackets, spring support - Series from 10,000 units / year with a unit weight of 2-10 kg Key economic data - Turnover: € 70 million - Shipping quantity: about 16,500 t - Employees: 290

Gruber & Kaja is a specialist for pressure casting technique. We think of each task to the whole problem solution, the casting and its optimal processing is only part of the technical and industrial requirement. As experienced consultants, when it comes to the development of parts, components and modules, secure our specialists for manufacturing and process technologies through their years of experience producing functional and economic end products. The products manufactured by Gruber & Kaja castings are characterized by high dimensional accuracy. This costly and time-consuming machining is saved. Qualtitätsmanagement Gruber & Kaja guarantees its customers a comprehensive quality management from product development to series production. In all phases of product development, the highest possible production stage is ensured by direct exchange of information. Our clients receive all necessary information in the form of documented test results upon request.

see www.druckguss-westfalen.de

Lüneburg, metropolis of the recreation area in the heathen, is also the center for business and commerce in the region. Their meaning the city gained by the reduction of "white gold" of the salt. However, the smelting of iron ore turf gained in the mining was at that time an important industry. Thus, the origin of today Lüneburg iron work is already the first mentioned around 1840 and is now in the industrial area "port" located on the outskirts of the Lüneburg. Production and management, designed according to the highest standards of efficiency and performance. Today, the Lüneburg iron plant produces about 160 employees per month approximately 800-900 tons of gray cast iron and nodular cast iron in all common materials.

IR-S CNC technology, everything in CNC milling.

We produce high-quality turned parts on time according to your specifications. We offer you precision, from small series production to mass production. Thanks to our know-how and the use of our CNC lathes, we produce for you at competitive unit costs in reliable quality.

The aim of our company is to produce the optimum casting in cooperation with our customers for any application. This includes individual advice in the development, and the design and manufacture of your casting by our qualified team. Our nearly 125-year-old foundry experience, know-how and modern production guarantee a perfect product. In order to achieve an optimal, economical and technical casting design, should already incorporate our expertise in the design. In cooperation with the customer may be so indicated by a casting-workpiece optimization and cost-effective design. Therefore benefit from our experience and take time, our advisory services!

Ladies and Gentlemen I have a small business for welding and assembly manufacturing. From January 2023 I will start as a master metalworker. After the master craftsman, the small business should then be re-registered as a large business.

P / S KUNSTSTOFFWERKE AG is an innovative medium-sized company in the plastics processing Industry with an own tool. From over 1000 tools, we produce technical plastic parts from 0.1g to 2.0 kg on powerful Injection molding machines with a clamping force of 150 up to 5000 kN and presses with clamping forces from 600 to 3000kN. Product-specific handling systems and peripherals to ensure safe production process at a consistently high level of quality. From our many years of experience in the processing of thermosets and thermoplastics materials (unreinforced, reinforced, modified or high-tech plastics) can our customers always benefit. The diversity of our production program, below are some examples, requires a special expertise. Plastic parts with a highly polished, verspiegelbarer surface design as part or plastic-metal Compounds; System and component assembly; Pure assembly work; Printing, welding and two-component injection molding.

With 20 employees, we can cover all cases need to mass production due to the high qualifications and a wide machines and facilities for prototyping and prototyping, small series. Due to the complete Leistunsangebots from simple turned parts up to high-precision cartridge valve groups We provide our customers both compliance with the qualitative tive specifications and timely delivery at a good price / performance ratio.

VDL TIM Hapert BV is a specialist in the mechanical processing of cast, welded,forged and other ferrous parts. Due to our experience we built up a worldwide purchase network for raw castings and forgings. Through automating, robotizing and continuously investing in the improvement of our organization we are always aiming for maximum productivity. Quality and environment is important so we are ISO/TS 16949 and ISO14001 certified. We belong to the VDL Groep BV, an international organization with some 7200 employees at more than 70 operating companies. These companies are divided in 3 different divisions; supplying companies, buses & coaches, and other end products. Because we can simply use the expertise of our sister supplying companies we are often able to offer our customers complete solutions.

The LBC LaserBearbeitungsCenter GmbH was founded in October 2002. LBC is an innovative service for different customer groups. The core competencies are laser generation, and laser sintering, based on metallic materials and the 3D laser engraving. These two technologies provide our customers with an enormous savings potential. Manufacturing costs and production time can be substantially reduced. LBC is a pioneering first for the generative production of contour-tempered tools. Since 2004, we successfully implement customer-specific tasks by laser generation. Through significant cycle time reduction, with simultaneous optimization of part quality and process control capability of numerous tools for plastic injection molding and metal die-casting could be successfully implemented in more than 5 years. An essential prerequisite is always to be on the cutting edge of technology. We achieve this through the constant contact with universities and machine manufacturers. Before the production of custom components LBC puts a strong emphasis on a detailed, project-specific advice to customers. Only such a perfect implementation of this technology is to be implemented in the market.

The company "Erwin Weidele GmbH" In 1968, Erwin Weidele the company for high-precision tooling. Cutting, stamping and progressive tools, tool spare parts and devices, today form the core of the production program. Problem solutions for mold design and production are developed in close partnership with the customer. Close customer contact, on-time delivery, fast onsite customer support are outstanding services of young, dynamic and powerful company. In modern administration and production spaces, the company presents about the turn of the millennium. In over 30 years, ERWIN Weidele GMBH competent partner of renowned companies of the Maschienenbaus, the automotive supplier industry, medical technology, the horticultural industry has so developed. The certification according to DIN EN ISO 9001 ensures future-oriented management and innovative business policies. Attaches great importance to the company on quality training of apprentices and training of employees. Well-trained toolmaker with extensive knowledge in all areas of tool work on most modern machines and CNC machining centers. Of course, all necessary programs for computer-controlled machine tools are developed and created in-house.

Half a century of industrial experience For several decades AH Industries Components occurs as a committed business partner for manufacturing companies in the areas of wind energy, shipbuilding and offshore. With several of the most important manufacturers in the world there is a close cooperation. We deliver fast and reliably with precision workpieces (tolerances of max. 1/100 mm), the dimensions of 12 x 5 m, diameter of 2.5 m and a weight of 100 tons can reach. In meeting these challenges, our long-standing experience and knowledge of our specialists will benefit us. Furthermore, we strive to always be one step ahead of technological development. Over long years, we have established worldwide contacts and acquired expertise, and with our suppliers, we have long-standing business relationships. This provides us with a powerful supply chain that ensures that flexibility and delivery reliability are ensured in an exemplary manner. Being able to be able to solve all the tasks required of us is part of our business philosophy. If a customer has special needs, they need to be implemented to its satisfaction. For this reason We are continuously improving work processes and products, in cooperation with the suppliers to ensure that they comply with the latest state of the art. A powerful group of companies AH Industries Components is developed over time through several mergers. Most recent acquisition was the company PNE Steel in Horsens, with the AH Maskinfabrik A / S merged in Kolding in 2005. Both business ran until 2007 under the name Hokodan A / S and were subsequently incorporated in the consolidated AH Industries. Today, the Group's subsidiaries offer a range of products and services that are unparalleled in the world. The manufacturing operations of the Group are located in Horsens and Kolding.

Richard Welter founded the company in 1946, since then we convince with the quality of our products. In the gear manufacturing and engineering about 80 employees in Lahr and Valff (France) are employed. Our customers include leading manufacturers and operators of rail vehicles, shipbuilding and mining, printing and machine tools. We supply quality components for system builders and transmission manufacturers. In mechanical engineering, we specialize in overhauls, modernization and reconstruction of CNC machine tools for gear cutting. We are partners in the automotive, commercial vehicle and tractor industry, as well as gear and transmission manufacturers. Their demands and desires, as well as new systems are standard for our actions. Our thinking is characterized by steadily advancing technology and growing demands on precision.