Welcome to Mauser Blechtechnik Mauser & Co. GmbH The specialists ... for modern sheet metal processing Needs and technologies are constantly changing, rising quality standards. The whole industry is in a rapid development process. We have always placed these dynamic challenges and grow with the demands of new technical possibilities. Traditionally, we build very early on new technologies and look more closely so apart. This high level of innovation pays off - most certainly for our customers. By expanding our range of services continuously, we have a tailored solution for all requirements. Because versatility is required. We realize our customers as a system supplier also sub-component manufacturing and complete work processes as an "extended workbench". Our design and planning services are also on offer. Our core areas punching, nibbling, laser cutting, forming, welding and assembly are coordinated so that we can offer our customers the best value for money even for small batches. The circle closes with the whole range of possibilities of surface treatment. We call this complete service. The fact that we act professionally and flexibly, brings our experience with it ...

Giesler Drehtechnik GmbH has been a well-known manufacturer of automatic turned parts for the automotive industry and other sectors for over 60 years. As a family company in the Sauerland, we manufacture complex precision turned parts in large series.

Vinegar technology FRINGS vinegar technology has been a market leader in the production of biological food vinegar for more than a century. About 60 % of the world vinegar production is produced by FRINGS systems. Extensive R&D activities have enabled FRINGS to set new standards in the design and construction of vinegar production plants. Chemical technology Core components and applications for gas-liquid reactions. FRINGS rotor-stator aeration turbines are the core component of our high-performance reactor units for gas/liquid reaction technology used in the chemical industry, for fine chemicals production and the pharmaceutical industry. Yeast technology FRINGS specializes in those areas of special yeast fermentations that require particular attention to plant-specific, sterile or procedural aspects. Immersible aerators FRINGS's range of tried-and-tested immersible aerators (under the license of ABS) for industrial waste water treatment includes the immersible TA and TAK aerators, of which more than 10,000 units have been sold worldwide.

The New Hauser Group is the holding company of the 26 currently single company with 2,195 employees and an annual turnover of 450 million euros in 2008. The activities of each company can be found in the following business areas again Textile • batching • centerwind • traveling cleaner • Transport systems (cheeses, roving bobbins, spinning cans) • suction and vacuum systems • coating and dry locations (use behind Web and knitting machines) • storage systems for bobbins • Palletiersysteme Contract production, such as • Rotating parts (pistons, bushings, washers, rings, cones, control piston, shaft, axles, hubs, pins, screws, spindles, pins, cylindrical rollers, rollers verch. Sizes, etc.) • Milled Parts • complete machine and plant construction according to customer requirements from design to Installation and Service • roller production (up to 8000 mm total length) • Locksmith • Wage measurement (modern measuring room includingPortal meter Zeiss MMZ G-25 30 20) Commercial Vehicles • Production of portal elements • Profile editing • Installation • Coating -Machine Elements • Expanding shafts • Clamping Couplings • chucks and adapters • friction and blade shafts • Shaft handling -Kompressorenbau (shipping) • Start air compressors • pressure vessel • Industrial Compressors • compressed air starter • Air-conditioning • bilge oily water separator • Biological treatment plants Environmental engineering �� Screw mills, up to 120 m³ / h • starscreens • Shovel separators • air classifier Products for the steel industry • Band edge processing facilities • rolling mills ��� conveyor systems A growing product range and increasing demands of customers from individual divisions make a steady and adequate investment readiness required for a stable and healthy growth of the company can be secured for the future. A particular interest is that in the group a technology-and innovation-friendly climate is to be promoted in the unconventional thinking and new ideas

Family business in metalworking. Department of steel construction, sheet metal processing, assembly and water jet cutting for industry and private individuals.

The Glaeser Precision Turning Shop GmbH is a family-run business. It is our understanding that you as a customer of our company are also considered our partner. We solve your problems in conjunction with you. Short-term decision-making processes and flexible resetting capabilities ensure a fast implementation even of special demands. Necessary alterations we realize in short terms and without any loss of time. Adherence to delivery dates and short periods from placing the order to shipping can be taken for granted. Through the continuous enlargement of our manufacturing capabilities we grow with the challenges and tasks assigned to us by our customers. Both flexibility and reliability serve as the basis of our business policy. Decide in favour of quality! We always aim at your complete satisfaction and contentment.

OCTOPUS ALUMINIUM offers mix of complex mechanical and galvanic processes which add value to aluminium products. ALUMINIUM treatment technology: MECHANICAL SURFACE PROCESS - brushing, polishing, blasting, vibrating, satinised MECHANICAL PROCESS - precise CNC turning, precise CNC milling, construction and sheet metal welding GALVANIC PROCESSES - anodizing, organic colouring and hard-coat POWDER COATING - electrostatic coating in various RAL shades, all material available ALUMINIUM products: - FRONT panels - RACK panels - NAMEPLATES, SIGN PLATES made with technology which provides reliable scratch and solvent resistance - Heatsinks for electronics components and other devices - Aluminium racks and housing R&D and production TITANIUM R&D and production of Titanium racks for anodizing processes. Years of experience and know-how of our technical and production staff is insurance for the best possible support and quality of customers parts. We add value to aluminium.

The official birth of SML dates back to 1994 and starting from the simplest processes, the company slowly began to specialize in two sectors: firstly, in the mechanical finishing processes thanks to the technical dedication and craftsmanship and secondly, in the processing of car wheels, flanges, channels and other components related to the automotive sector. Our technical knowledge allows a product to go from prototype to series. We have created a short production chain, eliminating steps and compressing production times, for maximum optimization.

NL-Maschinenbauelemente GmbH manufactures various components on 3 and 5 axis machining centers as well as turning centers.

Melior Laser Kft. is a Hungarian supplier company offering industrial services: metal fabrication, sheet metal machining and manufacturing sheet metal components. Its main services are laser cutting, punching and egde bending. Using modern technology and technical capabilities our committed specialists satisfy the most demanding quality requirements of our customers. We make use of our professional knowledge and experience in metalworking as suppliers of the following industry sectors: electronics, mechanical engineering, automotive industry, furniture manufacturing, building industry, medical devices, advertising and decoration. As a supplier partner Melior Laser Ltd.,with the quality in focus, is dedicated to assist production companies to achieve their business success. Specialties sheet metal machining, sheet metal component, laser cutting, punching, edge bending, metal fabrication www.meliorlaser.hu

Koch-CableTec GmbH was founded in 2009 as the sole proprietorship of Stefan Koch and was restructured as private limited company in 2011 following strong growth. Stefan Koch is the sole shareholder and managing director. From the outset, our company specialised in the development, design and construction of extremely high-quality manufactured cables, control units, electromechanical modules and control cabinets. If required, we will also support our customers through all stages from development, technical drawing and prototyping to series production. Thanks to our steady growth, not only has the number of employees increased over the years, but our fleet of machinery has also expanded. We therefore have the flexibility to cover cross-sections ranging from 0.08 mm² to 75 mm² and manufacturing lengths from 15 mm to 7000 mm. Our product range extends from single wiring harnesses, vehicle wiring systems, complete vehicle wiring harnesses and control units to single wires and wire sets for a number of sectors.

Schapenberg Industries GmbH is an owner-managed, dynamic and internationally positioned company, based in Sprockhövel in the southern Ruhr area of Germany. Schapenberg Industries also has local presences in India and Turkey. As a holistic system supplier we see ourselves as an expert in castings (steel, ductile iron, gray iron, aluminum, investment and centrifugal casting), turned and milled parts, forgings, stamped parts and steel welding fabrications. Detailed informations you can see on our official corporate website www.schapenberg.de

innovative, metal-working company produces components from sheet metal incl. milled and turned parts specialised in developping solutions to realise specific requirements of customers Optimizing the value chain of the customer: The firm achieves this aims due to: - counselling, support in constructing and - designing your product - from the prototype to series production - everything from one source definite technological orientation > consistent investment dicision high degree of automation > production 365 days a year or producing in multi-shift operations highest quality standards at reasonable price-performance ratios

SAMOTEH srl is a company that has been operating in the field of light metal carpentry for 20 years, offering processing and production services for third parties such as: • Laser cutting for sheets and tubes • Bending of sheets and tubes to C.N.C. • Sheet and plate calendering • Punching • Welding of iron, stainless steel and aluminum • Assembly • "Galvanizing, Chrome-plating, Painting" finishes Our customers are companies that operate in the metal carpentry sectors in general: • Furnishing accessories •Street furniture •Building • Components for the agricultural and thermal sector • Packagin • Metal shelving

We use our state-of-the-art sheet metal processing machines to produce contract parts as well as various in-house products for agriculture. We are a leading sheet metal processing company in North Macedonia. Planning, design, manufacturing and assembly from a single source guarantee flawless and professional work. When it comes to advising and providing technical solutions, our customers’ needs are our top priority. We strive to delight our customers with high-quality products. We also focus on customer-oriented, innovative solutions when producing finished sheet metal parts, assemblies and containers.

Unsere Betrieb ist seit 1988 tätig im Bereich Metallkonstruktionen und -wartung. Unser Hauptziel ist die maximale Qualität der Konstruktionen zu erreichen, die Einhaltung, der Lieferzeiten und mit die Verwendung unseres Wissens, die besten Lösungen und Anwendungen für jede Konstruktion zu garantieren. Wir fertigen alle Arten von mechanischen Teilen und Ersatzteilen nach Muster oder Design unserer Kunden. Unsere Werkstatt ist völlig ausgerüstet mit spezialisierten High-Tech-Geräten wie: C.N.C. Drehbänken, drei- und fünfachsigen Bearbeitungszentren aber auch mit einer breiten Palette üblicher Maschinen wie zum Beispiel (zB) : Drehmaschinen, Fräsern, Bohrern, Zahnradfräsern, Schweißgeräten. All dies in Kombination mit unseren hochqualifizierten Mitarbeitern, die ständig geschult werden, ermöglicht es uns, unser hohes Qualitätsniveau aufrechtzuerhalten und unseren Kunden die Perfektion eines vollständigen und genauen Endprodukts zu bieten. Unsere hochmodernen C.N.C. Maschinen gewährleisten die Möglichkeit, die Konstruktion zu wiederholen, sowie deren Zuverlässigkeit und Genauigkeit. Einige der von uns verwendeten Materialien sind: Stahl, Edelstahl, Gusseisen, Messing, Aluminium, Kupfer. Alle Materialien werden von einem Bauzertifikat begleitet.

LEDERER Metall & Kunststoff GmbH has specialized in the manufacture of plastic injection molded products for over 60 years. Customers of LEDERER Metall & Kunststoff GmbH come from all areas of industry. For example, confectionery, cosmetics and stationery manufacturers have received design packaging. A large number of customers come from the handicraft, decoration, display and promotion sectors. In addition, the automotive industry in particular is one of our most loyal customers. With absolute fidelity to the original and under the strictest quality requirements, we manufacture vehicle and spare parts for classic automobiles exclusively for our customers. In close dialogue with its worldwide customers, "plastic in its most beautiful form" is produced at LEDERER Metall & Kunststoff GmbH.