When you have your milled parts completely processed, including surface finish, by us, you no longer have to spend time searching for another company with free capacity and the additional logistical effort. In addition, we remain your sole contractual partner throughout the entire manufacturing process and assume responsibility for the impeccable quality of the machined parts and their surface treatments.

We manufacture according to drawings following products: Turned parts of Dm Dm 3 to 65 as a rod rotating parts -Rotational parts to Dm 120 -Frassteile to 300x500x200 Assembly -------------------------------------------------------------------------------------------------------- All our Produtke are made on CNC machines. At the time are in our production: - 13 CNC turning machines (Traub TNC30, 42, 65; Traub TNS30/42D; V200 INDEX, INDEX GE42, 65; Nakamura SC250, Maier ML26 ...) -3 CNC machining centers (TRAUB TVC350P, Schmid VMC1000) -Various machines (sawing, Nahcbearbeitungsmaschinen, vibratory finishing machines, presses ..) -------------------------------------------------------------------------------------------------------- We produce parts in small to medium-sized amount in almost all machinable materials. To see our quality Tete pay short delivery OPENING HOURS, little complaints and zuverlasigkeit. --------------------------------------------------------------------------------------------------------- More info can be found on our internet site or just give us a call.

We are a medium sized company that deals with the casting and machining of aluminum products. In our house create approximately 50 employees, from engineers on skilled workers to trainees in the departments Die-casting, grinding, machining, CNC machining, grinding, polishing, powder coating, printing and mounting, as well as ultrasonic machining with measurement, X-ray inspection and documentation . To our national and international customers include companies from the industry and craft fields of electrical engineering, automobile, gear technology, food and household goods, instruments, leisure and garden furniture, furniture, multimedia and pump technology. Our goal is to offer you a product from planning and design through to the finished part. For about two years we have hizugenommen to our Gießkompetenz Gravity die casting, the liquid presses and can produce very dense microstructure cost without sprue and riser with this procedure.(Pans, feet, pots but also more complex structures) Die cast aluminum 11 in electric furnaces, the aluminum is molten. Depending on the product and use a wide variety of alloys with appropriate melting and heat treatment applied. The liquefied aluminum is poured by hand with the help of a ladle into molds (molds) that are placed in advance with butane gas fires to temperature. After a specified Erkaltungszeit the mold is opened and the casting. On average, we pour about 90 parts per mold and layer. Each casting is subject to a visual inspection. The QS takes interval based front-destructive material testing, to observe the casting quality in the interior of the piece. CNC machining In many cases, machining operations are necessary. We have built our own house CNC department that allows all kinds of 'rotating' and 'milled' edits. Manual edits In many cases, manual activities are as deburring, judge or drill and tap drill necessary or not feasible other than by hand. Too, we have adjusted competent forces involved in these activities. Most of the edits are performed on specially constructed devices. Sawing, grinding, After casting sprues and risers are separated with log band saws. After the parts are tempered, meaning they are cured in convection ovens at 570 ° C and annealed at 180 ° C. In the grinding castings for machining are prepared or prepared the surface for subsequent coating. Also, the dimensionally accurate grinding after drawing is dominated by our professionals, so that a subsequent machining can possibly be dispensed with. After fine grinding, polishing takes place. The customer receives the polished finished product. Powder coating To give the surfaces of castings a sizable structure or enhanced durability, abrasion resistance, weather resistance, etc. (surface finish), we have built a powder coating. Here we wear electrostatically charged powder onto the workpiece that is subsequently heated in the oven and after cooling results in a solid coating of the workpiece. The quality of the coating is ensured and documented checks of layer thickness, adhesion and resistance. Assembly In addition to manufacturing the einzeilnen components of a product, we take care of you, of course, partial or complete assembly of the entire product. We ship the finished products, of course, directly from our company to your customers. ...

Construction: Development and design with various CAD / CAM systems, including Pro-/Engineer, Design Machining Processing: Sheet metal housing, chassis, front panels, mechanical components, weldments, turning and milling parts, special, pilot run and mass production Surface: Powder, enamel, screen printing, electroplating finishes, barrel finishing, polishing

SIA TS Rīga is since 1996 a Latvian metal processing company offering a full range of services to partners & customers located in Europe => CAD - LASER CUTTING SAWING - BENDING - WELDING - GRINDING - DRILLING - TAPPING - ASSEMBLING - BALANCING - PACKING - SHIPPING. WHY CHOOSE TSRIGA • Unparalleled Expertise: Benefit from our years of experience and deep knowledge in metal processing techniques. • Commitment to Quality: Our rigorous quality control ensures exceptional standards and precision in every product. • Customer - Centric Approach: We prioritize your needs and offer personalized solutions to meet your unique requirements. • Reliable Partnership: Build a very long-term relationship with a trustworthy partner known for professionalism and integrity. MANUFACTURING Professionalism and Expertise: At our manufacturing center, professionalism is ingrained in every aspect of our operations. Our teams consist of highly skilled and dedicated professionals who bring a wealth of experience to the table. From engineers and designers to welders and quality control experts, our personnel are trained to the highest standards and are committed to delivering exceptional results. In TSRIGA we have decided to set a manufacturing execution system (MES) which allows us to measure and monitor our productivity and our efficiency dynamically. QUALITY A Culture of Excellence and Quality: Quality is our creed, our DNA. We have fostered a culture of excellence that permeates every aspect of our company. Each member of our team is committed to pursuing perfection, engaging in a relentless pursuit of continuous improvement. We hold ourselves to rigorous standards, ensuring that every product or service leaving our premises lives up to our reputation for excellence.

Ossitaglio Veronese, a company operating for more than 40 years in sheet metal processing, has 3 multi-torch oxycutting plants (No. 6 torches) max. 300mm thick; in December 2023 it also installed a new TECOI plasma cutting system with Bevel head to perform inclined cutting (max. 50° inclination) and incorporated a work center that allows performing various mechanical processes such as: • Drilling; • Threading; • Beveling; • Counterbore; • Milling; • Boring etc. It usually deals with all the most common construction steels (S355J2+N pre-sandblasted as standard) for which it has a large warehouse, high elastic limit (S690/S890) and wear-resistant (HB400/450) steels, as well as special steels according to specific customer needs. Ossitaglio Veronese has also been collaborating for years with a company specialized in sheet metal bending which, in turn, has recently installed a new 8m bending machine with a power of 800 tons; this partnership allows us to offer a complete service and create products of a certain complexity and size.

Artisan company that has been dealing with sheet metal processing and construction of industrial suction systems for over 40 years

Company founded in 1971. We specialize in the construction of custom parts with 2D and 3D milling, wire cutting, dip cutting and 2D laser cutting. We also have mechanical presses for pre-series and series molding. We make prototype, step and block moulds.

Cast-to-measure Fields of application: General engineering, machine tools, construction, drive and traffic engineering Molding technique: Hand molding (molding materials based on furan resin and bentonite) Material qualities: EN-GJL 200 - EN-GJL 350, EN-GJS 400-18 - EN-GJS 700-2 Lot size: Single pieces and small series Stckgewicht: 0.1 - 2500kg, custom demand Finishing / Surface treatment: Net power: prime, paint * Foreign power: electro galvanized, hot-dip galvanizing, polishing, powder coating, gum, heat treatment mech. Processing: CNC machining (contribution) Single production Models: Wood, metal, plastic and foam models http://www.eisenwerk-elterlein.de

Manufacture of technical plastic parts. CNC turning, automatic turning, and milling/drilling.

Our engineering office was established in 1954 and is headed by Dipl.-Ing Peter Kaczynski since 1988. From the beginning, the focus was the procurement of machinery parts in the international supply markets. For 20 years, these are primarily Foundry products from worldwide manufacturing, as Steel investment casting, stainless steel investment casting, lost wax casting, sand casting, permanent mold casting, die casting, aluminum investment casting. Furthermore, we also supply MIM parts (metal powder injection molding) and sintered parts. Also, turning parts, stamping parts, metal stamping bending parts and forging parts belong to our program. Mechanical machining (CNC turning, CNC milling), heat treatment (hardening, vacuum hardening, induction hardening, carbo-nitriding), surface treatments (zinc plating, electro polishing, polishing, chrome plating, nickel plating) are now standard. Module assembly after consultation with our customers. All our foreign partners are certified.

We are on the market since 1980. We are a private company in SLO Maribor and we have specialized our production to precision turned parts. We work with steel, aluminum, brass, stainless steel, rubber and plastic.

PEINER Forming GmbH is a subsidiary of Indian Sundram Fasteners Limited (SFL). As a sales organization TVS Peine Services GmbH, we can offer all of our products internationally oriented production. Currently part of Sundram Fasteners Ltd.. eight manufacturing facilities in India, as well as subsidiaries in Germany (PEINER Forming GmbH in Peine and WindBolt GmbH in Hohenstein), the UK and China. When PEINER Forming GmbH screws, nuts and other high-quality, sophisticated, fastening systems and custom components (special parts) with nearly 100 years of experience produced in the size ranges from M12 to M72 in the areas of steel construction, mechanical engineering, wind turbines and the automotive industry (trucks and cars) . In the special parts range we see our strengths, particularly in Kaltumformbereich with subsequent machining, because our clients a material and cost advantage can therefore offer compared to conventional twisted parts. Through our following production possibilities (hot forming and cold forming), we are able to offer our customers Small amounts (prototype or spare parts requirements) as well as medium and large quantity requirements: • Cold extrusion • Hot pressing (Gas or Induction Heating) • CNC machining • Rotate • Grinding • Milling • Drilling • Calibrate • Reduce • Reward • Sandblasting • threading • Final rolls up to 12.9 • internal thread machining • External thread processing • Surface coating according to customer The following products we can offer you thus: • Double ends • Threaded rod • Hollow forged parts • ball pivot • The wheel bolts • Studs • countersunk screws • Welding screws • securing screws • 12 kt. Screw • 6 kt. Screw • 4 kt. Screw • cylinder screws • 6 kt. Nuts • mother similar parts In addition, we can offer you the following laboratory and labor services: • Material analysis by spectrometry • Tensile test (DIN EN ISO 6892-1, DIN EN ISO 898-1, DIN EN 20898-1) • Impact test (DIN EN 10045, DIN ISO 148 DIN 50115thDIN EN ISO 898-1) • Metallography / structure analysis • Rauheitsgraduntersuchungen according to EN 50602 • Hardness test (DIN EN ISO 6506, DIN EN ISO 6507, DIN EN ISO 6508, DIN EN ISO 898-1) • Corrosion testing (salt spray test EN ISO 9227), Kersternichtest after DIN EN ISO 6988, DIN 50018) • coefficient of friction / screws test of connectors (DIN 1800-7, DIN EN ISO 16047, DIN EN 14399, M12 - M48) • size checks • Surface roughness • Wage tempering • Wage coating (eg zinc phosphating)

We have been operating successfully since 1947 in textile machinery. For 20 years we offer in addition to our textile machines to the contract manufacturing. Due to our vertical integration, we are able to build complex special machines or systems - all from a single source. From a simple rotary part about consuming cutting structures to complete machinery and equipment (up to 20.000kg piece weight) - all of which we manufacture to your specifications. Both painting and electrical, pneumatic and hydraulic assembly are in our delivery.

HELMAPLÁS was founded in 1982 as a supplier of high precision and quality injection moulds. .Customer-oriented service. .Ongoing investment in state-of-the-art technology in all areas. .Highly qualified and specialized technical department. .Last generation manufacturing design and methods. .Total quality above all else

Laser cutting and folding decorative stainless steel sheets

Dear Sirs! We are one firm which we are doing altering metals ( CNC automatic turn). We are production a different parts all on the basic drawing of customer. We produce from all materials: Steel, Stainles steel, Aluminium aloys, messing, plastic and etc. For more information please do not histate and call us Best Regards Bojan Andolšek