Steel is our lifeblood - that's us LSV Lech-Stahl Veredelung GmbH was formed from two traditional bright steel companies in 2012. Lech-Stahl Veredelung in Oberndorf am Lech and Stahlveredelung Landsberg (SVL) have merged to form LSV Lech-Stahl Veredelung GmbH based in Landsberg am Lech. To implement new technologies, another location was built in the immediate vicinity of the parent company Lech-Stahlwerke in Meitingen in 2019. LSV Lech-Stahl Veredelung GmbH is a 100 percent subsidiary of the only steelworks in Bavaria, Lech-Stahlwerke GmbH in Meitingen. Both companies are part of the Max Aicher Foundation group. Our parent company is one of our largest suppliers of raw materials and supplies us with steel made from 100 percent recycled scrap. Due to this corporate structure, it is possible for us to fall back on the entire value chain and the associated expertise. The approximately 300 employees at the three LSV locations are committed people who are passionate about it. Decades of experience in the production of bright steel and the refinement of steel as well as the pursuit of the highest quality make it possible to realize the wishes of our customers and to establish close customer loyalty. Passion also means reliability paired with qualification. Therefore, in addition to the technically sophisticated production facilities, our employees are the basis for our success. LSV location Landsberg am Lech headquarters At the location in picturesque Landsberg am Lech, over 50,000 tons of bright steel are produced annually in a wide variety of refinement and processing stages. The focus is on the production of high-precision and ground toothed rack blanks as well as inductive single bar tempering. In addition, there are all classic bright steel processes at the highest level. LSV location Oberndorf am Lech The tranquil Oberndorf am Lech in the Donau-Ries region is the location of a completely modernized and expanded company with a capacity of over 80.000 tons per year. A high-tech bright steel production also forms the basis for the further refinement of the products. Short piece production and tempering systems at the highest technical level enable deeper added value in the production chain. The youngest LSV location in Meitingen Our third production site in Meitingen has been in operation since 2019. In addition to an outdoor warehouse and central warehouse of the parent company Lech-Stahlwerke, we produce steel in different processing and processing stages on almost 10,000 square meters in two aisles. In addition to the most modern production lines, the youngest LSV location has a motivated and flexible team that draws on the many years of experience of the other two locations.

In techpilot we offer you the products of BMY which is the best aftermarket connecting rod manufacturer. Having proven itself in the international automotive spare parts market, especially in the production of connecting rods of light commer- cial and passenger vehicles, BMY is a supplier to the world's leading automotive companies. Quality products, reassuring sales and after-sales services, product variety, fast shipping, 100,000 km engine warranty are among the most important reasons for choosing BMY products. Today, as BMY, we are experiencing the happi- ness of this trust and preference. We continue to grow by sharing our happiness, trust and earnings with our suppliers, customers and employees. You can always contact BMY about our company and our products in this catalogue. We would like to express our deepest gratitude to you for your interest. Together to many great happiness and success ... BMY Family

The company's production facility is located in Liepaja, Latvia, in an optimal location for customer service. This is evidenced by the orderly production infrastructure, excellent transport connections with European countries, the adequacy of engineering staff resources and the ability of educational institutions to train metalworking specialists. Together, these facts create special conditions for the attractiveness of our products in the eyes of the customer.

Swiss turning is our field of work . With a seven axes Swiss type machine , we can accomplish , compiled with twenty years experience , the best quality , at fair prices and reasonable delivery times .

Toolmaking With more than forty years of experience, we know what is important! The best tool can only achieve the desired success if it has proven itself in practice and if important relationships from the field of manufacturing technology are taken into account during planning and construction. Process reliability, precision and service life are just a few of the essential properties that our tools meet. We offer you our competence from tool development to tool design and manufacture to maintenance and preventive maintenance. For production, we have the equipment and the network to offer you all the necessary manufacturing processes.

Our core business is design and manufacturing of injection moulds for pallets, bulk bins, waste containers, crates and medium-to-large parts for other applications. Here you can watch our company video: https://youtu.be/MVRRBtNxbj8 Highlights of our company: -since 1982, more than 2000 moulds built for products weighing from 500 grs up to 40 kgs -100% production in our two plants in Jesi -Customers from 35 countries all over the world -High flexibility and easy communication thanks to a lean structure -Product design, injection moulding analyses, reverse engineering, prototype moulds ecc. -Trials in our factory on machines from 750 T to 4800 T -Assistance during start-up at your site -Service and repair, also at your site, also on moulds built by other moldmakers

"EUFA-TEC GmbH is an innovative, family-run company that specializes in consulting, project planning and production for the industry. We see ourselves as a reliable and competent partner for our customers, who offer everything from simple hard work such as creating production drawings to Development, construction and production of individual parts, assemblies and complex systems, gladly opposed to any challenge. "

Small company from Slovakia with 12 years experiences in production parts for motorsport, automotive, common machinery and aerospace. From idea, sketch, throug CAD, CAM to real product from aluminium alloy, plastic material, fiber-glass, carbon to steel and inox final parts. From prototype production from 1 part to serial production.

We offer processing of different materials on the CNC and universal milling machine and universal lathe.

Benefit from our expertise in these areas: Laser cutting Bending CNC milling CNC turning Welding painting complete assemblies

The Amschwand is a one man company which focuses on quality.

Individual solutions for components, mechanical assemblies and systems for mechanical and plant engineering. MSA AG is your reliable partner in mechanical and plant engineering for a wide variety of technological applications. We devote our attention to simple steel containers as well as highly complex research systems. We take on the complete range of plant construction for our customers - from conception and construction to production and after-sales service.

Turning - CNC and conventional Milling - CNC and conventional Drilling - CNC and conventional Sawing - CNC and conventional

Ranieri is an Italian company certified ISO9001:2015, a sub supplier specialized in the production of industrial rollers: conveyor rollers, rubber rollers and cylinders. Our partners operate in different sectors such as the paper industry, earth moving machines, agriculture, wood and other industrial machines which need rollers upon technical drawing that reach diameter Ø520mm and length 3.150mm.

We are happy that we introduce ourselves. We are a new innovative company working in mechanical engineering, especially metalworking in CNC machines. Quality and communication with the customer are very important to us. We have experience working in Germany and Switzerland. We offer turning, vertical milling and welding. We can produce 1000 mm long and 600 mm wide parts.

We are a precision steel processing company. Thanks to modern technologies, we are able to help you cut costs with the best quality of your product. Please feel free to contact us with any job, we'll do our best to make for you the best offer.

Metal processing - mold making - fixture construction

AS Anttrom is subcontracting manufacturing company in the field of high-precision CNC machining. We are located in Riga, Latvia. Our multitasking equipment works will all types of materials, part dimensions varies from 0,5 to 500 mm in diameter and up to 1.5 m in length. More you can see in our short video: https://youtu.be/bYVObeMVktM Why order from AS Anttrom? • Highest quality production and precision • High-End equipment • Client oriented • Agile turnkey production • Favorable geography and logistics • Internationally trained professional staff We are looking forward to establish fruitful cooperation with companies from aerospace, power, electronics, medical, industrial, engineering, automotive, robotics, optics and other industries.

kvhj,vj,