Mack AUTOMATION GmbH has been an owner-managed, medium-sized company in the electrical industry for over 40 years, known for innovation, top quality and punctuality. With highly qualified employees, we implement individual customer requirements in industrial automation technology, from design to production, assembly, and commissioning to service.

Globus Thermoplast GmbH has been firmly established in Schwentinental near Kiel for many years now, where it has specialised in the extrusion and processing of high-quality thermoplastics. We supply a wide variety of customers from a vast range of industries and regions with semi-finished products and machined components. Globus combines the innovative power of a modern German manufacturer with the down-to-earth nature of a tradition-conscious company with future-oriented strategies. Our many years of experience in plastics processing form our solid foundation.

We are a 9001:2008 certified according to DIN EN ISO system supplier of mechanical machining technology. Our specialty is single and small batch production of high-quality, complex and dimensionally accurate components and complex workpieces. Our customers are mainly in the fields of special purpose machinery, jigs, patterns and model construction, precision engineering, plastics engineering, tooling, mold etc..

We work with the biggest Italian and international groups in many different sectors and markets and our strengths are the flexibility and dynamism that allowed us to reach in few years a level of exponential growth to which we can add a notable rate of customer satisfaction. We are convinced that thanks to our own flexible and dynamic way of relating to the market, and to our customers, we can face the difficult and typical challenges of the new global economy. Our machine fleet is continually updated paying attention to new technologies, which enable us to go further to optimize the range of our production and allow us to deliver the finished product including the necessary certifications. We hope to start with you as soon as possible an interesting collaboration and to add you to our best customers. For any other information or doubt we stay at your complete disposal and wait for your request for quotation.

We are a company located in Koszalin, Poland. We operate on Polish market as well as in Western European countries. We offer a wide range of services in the field of metal processing: welding, metal sheet cutting, bending, machining, painting. We provide comprehensive service at all stages of implementation. You can count on consulting in the field of technology and construction, as well as the exact implementation of even the most difficult projects (including details with a high degree of complexity and accuracy). We are ready to cooperate with You.

Individual solutions for individual customers With the investment in additional CNC machining centers, a milestone in the expansion of manufacturing capacities has been reached. Regardless of whether your drawing or our design serves as the basis for processing, we can manufacture flexibly and efficiently. We process all machinable materials such as steel, tool steel, brass, aluminum, plastic and many more. Benefit from our high-quality production in the area of individual parts, small and medium series production. Elaborate special components and prototypes are also part of our strengths. In addition, we assemble workpieces into complete assemblies. You can also count on our know-how in the area of surface coating and treatment, as we have been working very successfully with competent and reliable partners for many years. Our wide range guarantees a customer- and product-specific processing solution as well as a high degree of flexibility with short lead times.

Johann B. Waas GmbH has been a production company for metal and plastic components and assemblies for the automotive, medical technology and general mechanical engineering industries since 1967. Specializing in complex turned and turned-milled parts, we manufacture on state-of-the-art CNC machines in small and medium series according to the current standards of our industry and the automotive industry as a Tier 3 supplier.

Welcome to Metallbau Ruch, your leading contract manufacturer in the field of laser cutting and waterjet cutting. With pride in owning two state-of-the-art laser cutting systems from Trumpf, we boast an impressive 4 x 2 meter working area and a powerful 24 kW laser output. This capability allows us to cut steel sheets up to 20 mm thick using nitrogen, resulting in flawless, oxide-free cut edges. As a result, there is no need for post-processing such as powder coating or painting. Our laser cutting capabilities extend beyond thin materials. We are proud to offer cutting capacities of up to 50 mm stainless steel and 40 mm steel. This capability enables us to tackle even the most demanding projects with varying material thicknesses and achieve high-quality results. In addition, we provide waterjet cutting for the production of 3D components. This versatile method enables precise cutting of various materials to realize complex shapes and structures. Discover the quality and precision that Metallbau Ruch offers. Contact us today to discuss your requirements in the field of laser cutting and waterjet cutting. Sincerely, Metallbau Ruch Team

MECAVG is a precision machining company specializing in milling and turning services for the production of high-quality mechanical components. We focus on prototype development, small and medium production runs, and custom tooling solutions. Our team is composed of experienced professionals, with expertise in delivering high-precision parts for industries such as automotive, aerospace, and industrial manufacturing. We pride ourselves on delivering reliable, precise, and tailor-made solutions to meet the specific needs of our clients. At MECAVG, customer satisfaction and innovation are at the core of our operations. Contact us to learn how we can support your projects with precision machining excellence.

COMPANY Our extensive range for you: »Aluminium gravity die casting »Mold making, tool and fixture »Machining »Heat treatment of cast aluminum parts »X-ray inspection ��CNC sinker EDM »Installation of components and finished parts Due to the long-standing cooperation with competent suppliers, we can offer you the following services in addition: Powder coating, yellow chromating or vibratory finishing. Ask us. We will respond promptly. FOUNDRY In our foundry castings are produced in the mold gravity casting. We work with conventional casting techniques as well as with casting machines, casting machines and hydraulically controlled tilting casting machines. The unit weight of our castings have the wide range of 20 g to 22 kg. In order to reduce post-processing, it is possible to pour holes and cavities in front, and with cast-in. With the loading of sand cores, the requirement is created to manufacture large undercuts.A clean and coatable surface is an essential quality of our castings. Our quality philosophy is based on expertise and years of experience. Talk to us. We will find a solution to your problem. Examples of cast-in are: "Threaded bushing (brass steel stainless steel) »Bolt, Bushings »Setscrews »Various parts provided by the customer The material aluminum Aluminium offers the advantages of being very light and very resistant to corrosion. With aluminum, twisty, thin-walled, pressure-proof and vibration resistant castings can be manufactured. Whether DIN or special alloy, we refer all aluminum alloys directly from the smelter. If you wish, we can also provide a certificate of analysis of the different alloys available. TOOL Rittel our name stands for high quality in the field of tool and Kokillengusses. In order to produce a high quality, perfect casting, especially a highly accurate and precisely crafted mold is required.With our world-class high-tech machine tools, we are able to provide the highest precision. The following machines are available: "Conventional milling machines »2 CNC milling machines »3 CNC machining centers and »2 Errodiermaschinen. On the 5-axis machining center and the path-controlled Senkerrodiermaschine we are particularly proud. Through a network of our CNC machines and our machining centers are connected to a server. This creates a flawless data exchange between the two CAD / CAM workstations is guaranteed and we can not accept designs of our clients in the most popular data formats. PROCESSING Mechanical Production Milling machines, machining centers and CNC lathes at our disposal for the machining available. In the field of cast iron makes our many years of experience the highest level of accuracy and process reliability possible. In our mechanical production but workpieces are produced, which are not made of cast iron.Also in this area is the 5-axis machining center and the path-controlled Senkerrodiermaschine represents a special Assembly To meet the demands of the market, we have a few years ago on the assembly of components our range - with and without Castings - expanded. We take for you to place an order, picking and packing of purchased parts to ensure the timely delivery of the module.

Dear valued customers, We are pleased to prepare a project proposal for you. The following areas are our strengths: - Aluminum extrusions (including processing, surface treatment, just-in-time) - Stamping and bending parts - Pressure die castings (aluminum and Zamak) - Component creation - Plastic parts - Turning and milling parts

Our expertise at the service of customers 30 years experience The mkt metal and plastic GmbH is an innovative, customer-oriented company with a focus on the production of metal-plastic composites and demanding thermoplastic plastic parts and their construction. The foundation stone was laid in 1996 by a successful MBO with 30 years of experience in the tooling and plastic molding. We offer our customers solutions for the thermoplastic injection molding, simple parts to complex assemblies with overmolding of metal and parts in 2-shot molding components. We control quantities from prototype to series production parts with million parts per year. We develop solutions for the most varied of tasks in the automotive, office furniture, aerospace, medical and automation industries. Competent troubleshooting Discuss with us your problem. Through competent partner in the fields of design, tooling and plastic injection we offer optimal technical and economic solutions. We implement the solution found by the design to mass production. Flexible and customer-oriented We are always there for you and advise you. We respond individually to their needs and show you tailored solutions with all our expertise.

The company was founded in Limburg in 1926. Back then, they mainly dedicated themselves to blacksmithing and agricultural technology. In the 50s, 60s and 70s, the focus of the company's activities was on the locksmith trade. With the takeover by the 3rd generation at the beginning of the 1980s, the steel/metal construction and agricultural machinery departments were created. As a result of the expansion into a new industrial area in 1990, a new factory and administration building was built on approximately 13,000 m² of floor space, in which both departments were active. In 2000, the construction of another factory and administration building separated the two departments. Today, the company is managed by the 3rd or 4th generation. Today, we are, among other things, an efficient provider of steel and metal construction works. Through demanding projects, we are able to demonstrate our expertise day by day and thus form the basis for a successful future. In addition to structural steel construction, our production also includes almost every type of locksmith and metal construction work. Thanks to our wide range of services, our experienced assembly team is a competent partner, which ensures smooth and fast processing on the construction site.

Precision meets efficiency That is JeruTec Our goal is to turn your vision into accurate and efficient results. Our core is the ultra-modern Index C100 lathe with a 42mm bar passage, equipped with three turrets and 10 driven tools each, as well as an LNS Quickload loader. This technical masterpiece enables us to produce from mini series to large series of over 100,000 pieces. From material procurement to production to delivery to you — we take care of the entire process. We deliver partial quantities, pack, assemble and store safely and securely. Our expertise covers a wide range of materials, including aluminum, steel, titanium, and various plastics. We stand for customer-specific production. Your parts are manufactured strictly according to your drawings and specifications. But we are also happy to assist you in developing complex workpieces in order to find the best possible and cost-effective manufacturing technology. Refinement? No problem! We coordinate these processes for you. Whether hardened, nickel-plated, chrome-plated, anodized, gold-plated, painted or laser-marked — we meet your requirements. Jerutec — your partner for precision and efficiency. We look forward to your challenges and to implementing our motto in every project.

We specialize in Additive Manufacturing - particularly DMLS and precision CNC processes. From design conceptualization to AM, modeling, prototyping, serial production, and post-processing, we offer comprehensive Engineering and Manufacturing solutions tailored to drive your success.

Perform3D — your partner for blow molding and hollow plastic bodies Perform3D is your experienced specialist for the production of blow molds, prototypes, devices as well as individual and series parts. With cutting-edge technology and over 550 m² of production space, we offer fast, flexible solutions — from tool manufacturing to finished plastic blown products. Highest quality, punctuality and cost-effective production are our top priorities. Let us achieve your production goals together!

Quality connecting ... Anything but ordinary: Founded in 1991, the shock GmbH has etabiliert as drawing parts specialist with vast experience in the fastening, assembly and fastening technology. Through performance and quality of highly trained employees, our customers more than satisfied close sets. A great success, which we see as a guide for the future, because Swabian Tüftlertum, bodenstaendiges growth and professional service will remain our most important milestones. Whether as a training company or as a forward-looking company with an excellent reputation, we are rooted in our values, as well as always open to new ideas: for example, for your inquiries, to which we look forward. In this sense, we are updating our story, which always puts a traditionally at the center - the success of our clients including high-profile screws wholesalers and industrial large customers from different industries. Where other abwinken, we are happy for you to go to the starting line: rotary and stamped parts outside the norm, from small lot to the very large quantities. Whether high-quality fasteners such as screws, nuts or DIN / norm parts -. Their special requests are part of our standard, because we even away from the ordinary, the manufacture what you need. It is precisely this flexibility and customer orientation is characterized buns from: With certified quality we deliver to you as part of the production as well as cooperation with longstanding punctual, fast and reliable. The basis for this is our comprehensive know-how that has grown to more than 20 years and has shaped together with our German / European top quality industry's first-class reputation of the company "screws and turned parts Schock GmbH". And we are a little proud, but see this primarily as a commitment to anew to be present for our customers every day with Topp services - in the automotive sector by working with certified partners (at least ISO 9001:2008), which not only our high, but also the strictest requirements in accordance with ISO TS 16949 meet. With us it's all about (Precision) turned parts in standard and customized designs and DIN standard parts with special features. The focus of our core competency focus is on the quality of the advice, the variety of products to a wide variety of editing options with different surfaces and a high flexibility with regard to the economic quantities. Our range at a glance: DIN standard parts with special features: CN = peak (DIN EN ISO 4753), FO = studs without interference thread (DIN 962), etc. Processing: Depending on the accuracy and tolerance, we offer appropriate processing options. Our machinery ranging from CNC to NC. With additional manual work we can keep production costs low, since not always tolerances of 0.01 mm are required. Surfaces: Electroplating and heat treatments are just as important as electro galvanizing, hot-dip galvanizing, silver, gold, nickel plating, bronzing, phosphating, barrel finishing, zinc flake coatings (CrVI-free) and clamped / sticky thread fuses acc.DIN 267, Part 28 / DIN 267, Part 27, etc. Materials: Steel, stainless steel, nonferrous metals, plastics, special materials: 2.4952, Inconel, Hastelloy, Nimonic 80A, titanium (3.7035), tantalum, zirconium etc. Production program Turning: Precision turned parts with axial and vertical drilling and milling operations; hard turning; inner square, hexagon socket; keyways; milling contours in the diamete...

We manufacture machine parts and stampings from prototype to series production. Detailed planning, high skill, a constantly updated machinery and well trained personnel are the basis of our quality products. The offer high product safety and always timely order processing our customers in the long term the benefits to themselves in the highly competitive market positive to say. Troubleshooting are for us a challenge that we share with Customers realize. Translation by Google Translate

Micromachining is our passion. This makes us the ideal partner for manufacturers and manufacturing companies that need micro-turned parts for their production. Technical precision, highest quality standards, excellent Project and customer support and delivery reliability are the basis of our success. We always keep an eye on quality and meet the requirements of DIN EN ISO 9001 and DIN EN ISO 13485. At Ramme Drehteile, we rely on partnership and joint success. We would like to get to know you and look forward to talking to you. We are strong in CNC long turning and specialize in micro machining. Excellent technical know-how, new technologies in the area of CNC long turning, high quality standards and professional project management are our strengths. We manufacture for various industries, in particular as part of an extended workbench for medical devices. Our passion: micromachining We produce medium and large series on ultra-modern CNC automatic lathes. 11 axes and a large number of driven tools make it possible to machine complex geometries in the μ-range. - Micromachining in Ø 0.2 - 25 mm according to customer specifications - Freeform turning using 3D/CAD CAM - Machining of non-ferrous metals, stainless steels and technical plastics as well as titanium - Coordination of additional services is possible