The Schulz Conveyor Systems GmbH with its seat in Gräfenroda was founded by Mr. Peter Schulz 1991st Immediately after the foundation began to invest in the latest technologies. Aided by the laser cutting technology, which had its technical breakthrough early 90s, the clientele, and thus the company grew rapidly. Within just a few years on the former site of an old glass factory an advanced sheet metal manufacturing. After the laser technology also held technologies such as the folding and welding feed. In 1997, Schulz conveyor systems GmbH took over part of the Gothaer Fahrzeugwerke. Thus opened up for the company, a new line of business - the automotive industry. Today the company Schulz conveyor systems GmbH is a solid medium-sized company, which adapts through a flexible, broad-based manufacturing processes and the rising and volatile market conditions and requirements.She specializes in the manufacture of welding and assembly, as well as laser and metal parts. To continue in the future success of the company in the usual manner, the following business objectives: Ausbau and consolidation of market position Fertigung highest technical level Lieferung best quality Automatisierung manufacturing Erhöhung of technical, professional expertise to assist customers with constructive issues and cost reduction Erhöhung production depth

The J. van Walraven BV was founded in 1942 and is a privately held company. We develop, produce and distribute innovative fastening, fire protection and plumbing systems. Currently, the Walraven Group consists of the holding company and 18 other subsidiaries. Organization of the group Product systems Our range is clearly divided into three areas: BIS fastening systems And much more fixing materials for heating, ventilation and sanitary installations as well as for sprinkler pipes, air ducts, electrical cables, cable trays BIS Fire Protection Systems Solutions for fire resistant and smoke gas-tight sealing of pipe and cable penetrations. As well as fire protection certified support products. BIS Sanitary Systems Sanitary pretext frame for fixing of toilet bowls, urinals and washbasins. Special BIS Vario ®: Electric or mechanical height adjustment! Ultimately Sanitary Silicones and Sealants ... Distribution In Europe, and particularly in Germany Walraven has a huge market share in the attachment area.Walraven products are used by thousands of installation companies in Europe, America, Asia, Australia and the Middle East. Safe Connection Walraven is one of the founders and member of the 'European Quality Association for pipe mounting eV' (safe connection). The composite consisting of numerous major manufacturers of Pipe fixing market, has established comparable, transparent policies regarding the testing procedures of load values. Advantage for planners and craftsmen: a more reliable and easier planning. The 'Quality Association pipe fixing' was 2003 eV from the "RAL", the German Institute for Quality Assurance and Certification, recognized. Quality labeling J. van Walraven Holding BV is ISO 9001; 2000 certified Production After 71 years of experience in the production of pipe fastening systems, Walraven can look at a tool and machine park, which is located at the highest technical level, and thus allows absolutely competitive production processes.. Production includes cutting, shaping and cutting of sheet metal and metals. A fully automated rail manufacturing to galvanizing and automatic packaging. Bzgl. Metal Stamping: Here we have more than 30 different presses with different benefits (force values 45-130 tons and speed between 20 and 150 ejections per minute). Ultimately Walraven can look back with pride on its own and full grown continuously tool shop, so that developments always even, safe and fast can be implemented.

VR Technology was born from the synergy of a group of entrepreneurs who have been operating in the steel sector for decades to allow them to expand their range of services to the customer. Thanks to its technical structure and thanks to its machinery, the company is able to act as the sole interlocutor for the customer as it is able to manage the entire production process and provide "turnkey" orders. VR Technology focuses its attention on the construction of structures for the most diverse fields of use, such as: o Cableway (station structures, frames, supports, trunks, trees, pulleys and spokes); o Lifting systems (gantry cranes, bridge cranes, jib cranes and marine cranes); o Machine tools (press bases and bases); o Hydroelectric (Pelton, Francis, Kaplan boxes, distributors, suction and bifurcated pipes); o Waste treatment and disposal plants (tanks, agitators, ovens, boilers, chimneys, heat exchangers and combustion chambers); o Civil and industrial constructions (welded beams, complete structures and columns); o Fixed and transportable rides; o Production of design details including mechanical processing. Mechanical processing is the cornerstone of production activities. Thanks to its flexible structure, the company can vary its production according to the needs of each customer. VR Technology relies on qualified welders according to UNI EN ISO 9606-1, the entire welding process is performed in accordance with UNI EN ISO 3834-2. The companies that Vr Technology relies on for non-destructive tests provide 2nd level qualified personnel in accordance with UNI EN ISO 9712. The company is undergoing EN ISO 9001 certification. We remain available for more detailed information, or for any requests for offers.

We are ... since when ... We offer: - Weldments - Machine frame / Machine Stands - Steel - Metal - Hall - ....

Production profile Industrial service providers and manufacturers of capital goods • Development, design, manufacture, assembly and commissioning of components or complete systems according to customer requirements • Individual solutions with exact Manufacturing accuracy • Repairs, maintenance, conversion, implementation, expansion of existing machines and systems • Industrial service • Compressed air technology / service (specialized in KAESER compressors) • item pluspartner • Arms manufacturing license Main profile • Special machines, systems, aggregates and components for the capital goods industry • Filter systems for particle filtration • Container construction • Steel construction • mech. Machining workpieces • Refurbishment and revision of drilling and construction machines • Precision machining in automatic construction down to the zero dimension range • Production of weapon parts and complete weapons • Tool making • Production of analog film production systems Services etc. • technological steel construction • Assembly services for all chemical, pharmaceutical and production engineering apparatus and plant engineering • All types of welded structures • Profile construction • Aluminum profile construction • Industrial services • Maintenance, inspection and servicing of mechanical equipment • Tool repair (grinding, sharpening) • Repair of film and photo technical systems

Drima Srl specialises in the manufacture of parts made using the spinning method for use in numerous sectors, such as: farming, the electromechanical and automotive industry, telecommunications, household appliances, lighting, heating, air ventilation and building construction.

The family owned company has been an important service provider in the field of mechanical engineering and metal industry for many years. We cooperate with our customers from various fields of mechanical engineering with great precision and dedication. We manufacture pieces for different needs - like chemical industry, airport ground support equipment, agricultural industry and others. Our priority is to create innovative solutions that go beyond standard solutions. WELDING: Our experienced welders are trained to weld a variety of materials, including steel, stainless steel, and aluminium. We use the most modern welding techniques and provide quality joints, according to the agreed standards. MECHANICAL ENGINEERING: The team uses state-of-the-art CAD software to construct machines and devices tailored to your specific needs. From prototyping to serial production. METAL PRODUCTS: We manufacture a wide range of metal products from a variety of materials such as steel, stainless steel and aluminium. We use precise technological procedures and provide you with high quality products. STAINLESS STEEL PRODUCTS: We specialise in the manufacture of stainless-steel products (INOX) that are resistant to corrosion, temperature and mechanical impacts. Our INOX products are suitable for use in a variety of industries, from the food and pharmaceutical industries to the chemical and petrochemical industries. Because we are convinced that we can make things even better, we have made an important decision. This year we started with the construction of new production premises measuring 900 m2. With this, we will be able to increase our quality, competitiveness and be able to participate at even larger projects.

3D Mechanical Design Certified Welding Fanuc Cobot Welding Fiber Laser / Tube Laser CNC Milling / Traditional Cutting CNC Bending Custom Steel Structure / Machines Custom Industrial Equipment

Richter metal construction for industrial customers As a partner for industrial customers, Richter Metallbau offers a competent full service at an economical price. Another thing that speaks for a cooperation with us: our in-depth design and production experience. The first class quality of all our work. And of course: that we are available for you at any time and that we accompany you as partners throughout the entire course of the project. You can find an overview of our services for industrial customers below. Of course, we would be happy to advise you personally or send you an individual offer. Contact us!

KROZMET S.C. is a Polish company based in Marcinkowo (Purda municipality, Warmian-Masurian Voivodeship), operating since 2009. The company specializes in the design and manufacturing of machines and technological solutions for industry, agriculture, and the recycling sector. Business Profile The company offers comprehensive solutions in three main segments: Krozmet Industry – production of conveyors, specialized machinery, and spare parts for industry. Krozmet Farmer – solutions for agriculture, including machines and equipment supporting production processes. Krozmet Recycling – delivery of modern sorting lines and waste processing equipment. In this segment, the company cooperates with the Dutch firm Bollegraaf Recycling Solutions, offering comprehensive recycling systems.

Alpistamp S.R.L. is an Italian company specialized in cold sheet metal stamping using mechanical presses up to 500 tons, with over 40 years of experience serving more than 60 customers worldwide. We operate across various industries, including automotive, household appliances, electrical, agricultural, and more. Our strengths lie in precision, reliability, and quality, managing the entire production process in-house — from tool design (using 3D CAD/CAM software) to mass production of metal parts, up to final quality control. Our equipment includes mechanical presses from 40 to 500 tons, automated feeding lines, and in-house tooling maintenance capabilities. Thanks to our production flexibility and fast order management, we are the ideal partner for companies looking for a reliable and competitive supplier in Europe.

We produce high-precision products from ferrous and non-ferrous metals, aluminum and stainless steel quickly and in top quality — from simple components to complete assemblies, from individual parts to small series to series production. Whether it's construction, laser cutting and punching, waterjet cutting, bending, TIG welding, CNC stud welding, assembly, finishing or screen printing, we provide you with everything from a single source. Take advantage of our expertise in sheet metal processing. Try us out! We are looking forward to getting to know you.

We are a small company located in Croatia near the capital Zagreb. Our product are vessels and pressure vessels for water, oil and petrol products from steel and stainless steel. Also containers and elements for meat industry, wood industry and transport industry. We are also capable of making steel and stainless steel construction elements and components for various industry in single and series production. With over 20 years of experiens, constant learning and investing in new technologies we are capable for any task.

Company NEUTEC laser applications was by the present owner Walter Neumann founded in 1999. Walter Neumann previously worked already many years during that Department and thus compensates for its theme-specific experiences in-house. Specifically, the technique of laser cutting was formed in this period always out more than centrally focused power field. In parallel, conventional manufacturing processes, have been retained. This formed the company name: NEUTEC laser applications. NEUTEC Laser Applications manufactures laser cutting according to customer specification, according to drawings, according to drawing or of finished dxf dwg -.. Files. Alternatively, - also digitized NEUTEC, your ideas for you. Besides laser cuts NEUTEC offers mechanical methods such as edging, bending, milling, drilling and other than wage labor ... NEUTEC will advise you throughout the production phase from design to delivery.

The machinery and equipment of Deconta program is developed, manufactured and marketed since 1990. Through the experience of the manufacture of our equipment, we have established ourselves as a contract manufacturing operation in sheet metal processing. Mostly We use mild steel, galvanized steel, stainless steel and aluminum. In our modern CNC punch press brakes and that are equipped with a wide range of tools, it is possible to make very many forms of sheet metal. For further processing, we employ experienced welders can make the challenging and complex components made of stainless steel and aluminum. Our team consists of highly motivated and well trained staff. We will answer your inquiries as soon as possible and always are also happy to visit ready.

Presentation of the company The name of the company: ZEUS Exhausts Limited Trade and Service Company Short name of the company: ZEUS Exhausts GmbH. Place of the company: 8800 Nagykanizsa, Sörgyár Street 3808. hrsz. Location of the company: 8800 Nagykanizsa, Sörgyár Street 3808. hrsz. Our company was founded in October 23, 2003. Main activity of the company was started with production of the exhaust, but this professional experience expands earlier. The production of the exhaust was started in 1998. in a single company. These goods were produced and sold on their own license. Due to increasing demand, the individual company was terminated, and the production was continued down the limited partnership. We develop our high quality, excellent, fashionable and beautiful engineered products according to the market needs. In the last 10 years, the production has been very strong both in quality and in quantity.The quantity of our production rose in high value against the first year, thanking for good prices and excellent products. We are at your disposal with special production, individual production and we keep the customer's request very important. The name "ZEUS" means modern, high quality and good service. The use of the ZEUS exhaust guarantees the highest level of performance and the highest quality. This high quality production also require technical facility. That's why we want to buy the most developed machines and equipment. www.zeusmetal.eu From 2004, the company has been cooperation partner in the furniture industry. Thanks to the technology in exhaust production, our company has been the best and largest partner of Kanizsa Trend GmbH and we are the good partners of Quattro Mobili also because of precise processing and punctual delivery. At the moment we produce 80 different models. We also help companies with planning and development.The continuous changing needs we can solve the fast reactions. The quality of the applied materials are 1st class, therefore excellent quality of our products are also. Last year we received 92% qualification from the company Kanizsa Trend. www.zeusmetal.hu (about us) Credentials: -Kanizsa Trend GmbH. -Kanizsa Design GmbH. -Quattro Mobili GmbH. -Stulwerk GmbH. -Nilfisk Advance -Ada Maschienen: - 8 pieces of AWI welding machines - 5 pcs CO2 welding machines - 4 pieces eccentric squeezing - 2 pieces boring machine - 2 pieces of hand crimping - 12 pieces of winches - 5 pieces of grinding machines with positioning system - 6 pcs edge sanding machines - 1 piece angle machine for flat steel - 1 piece CNC angle machine - 1 piece Metabo polishing machine - 3 pieces of hand belt sanding machines - 2 pieces of banding machines (nagyteljesítményű) - 1 pc of press brake CNC - 1 piece hand rolling machine - 1 piece of tin snips - 6 pcs polishing machines - 1 piece of laser cutter We plan to purchase the machine in 2014 Our Filozofie: At the moment we have 38 employees, out of which 32 colleagues work in the production. In the fall of 2009 we had a great opportunity. In addition to furniture parts, we have won a project for chairs from Kanizsa Trend GmbH. Currently we produce 14 different chairs and 10 different backs, in different surface (Chrome glossy, matt, black chrome) We have a new business partner, we have started discussions with this company in 2009, and today we have a contract between two companies, this conta...

We are a medium-sized, owner-operated, metal processing company. Focus: aluminum and Edelstahlbe and Processing (separate production) Laser (up to 25mm plate thickness) and Kant technology (up to 4000 mm in length), mechanical CNC machining, Special engineering, Steel structures, Majority of powder coating 3x3x8m, Wet painting 3x3x8m, Certified to ISO 9001, EN 15085-2 CL1, Extensive verification of suitability

The fulfillment of orders and the understanding of the tasks assigned to us are the basis for the satisfaction and success of our customers. It is our task and challenge to continuously develop further, to recognize requirements at an early stage and to develop innovative and future-oriented solutions. Due to our many years of experience in dealing with our extensive machine park, we are able to process individual orders according to customer specifications. Contact us. Together with our customers, we work out individual solutions in order to manufacture a product based on their drawings. Haselbauer GmbH For CNC laser cutting and industrial sheet metal processing W0 - approval according to AD 2000 / TRD100 Re-stamping certificate Glow certificate