MP srl was founded in 1988 by the Mio family of Roveredo in Piano (PN), a family that has been working in the metal-working field since 1977. The referring markets are for 30% in Italy; and the other 70% is divided among Germany, Austria, Bulgary and Poland. The multi-year experience of the company and the competence of our human resources allow us to offer our Clients an effective and efficient service of technical consultancy for the solution of problems which may arise through the use of the product and of the configuration of the productive process. Products and Services Service Offered: The forming and other type of processes listed below; The projecting and the constructing of the moulds carried out by external partners. -Fineblanking / pressing -Punching / pressing (Out-of-tool) -Deep-drawing -Plate rolling / bending -Spinning Materials: Iron and non-iron metals with a thickness that goes from 0.3 mm to 6 mm Treatments: Galvanizing, varnishing, cataphoresis, anodizating, chrome plating, printing. Certifications: SQ ISO9001 since 17th September 2001 The establishment and the Machinery Fleet • MP is the owner of an area of buildings with a surface measuring 5500 sq. mt. on a total of a land which measures about 9000 sq. mt. About 50% of its logistic potential is in use at the moment. • Equipment: Mechanical pressing from 30 to 315 tons, equipment for the drilling and the threading, saws and machinery such as mill cutter, corrector, grinder and turney, which allow to carry out with high and ready performance the small maintenance and repairing of the moulds and equipment.

is a strongly growing, independent, family-owned company with a tradition of more than 120 years. is known for its innovative solutions based on the forming of wire, tube and strip material. offers extensive research and development services at an early stage and is a development supplier of OEMs and system manufacturers. offers an extensive range of services, from forming, joining and assembly technologies to surface treatment via machine and tool construction. is present at international level and has production sites in eleven countries on three continents.

The mechanical production crucible GmbH (formerly Mechanical Production Radeberg GmbH) has almost 20 years a reliable supplier of complex components and assemblies for industry and crafts. We want our abilities and achievements in more detail representation. Our company is distinguished by the fact that we do everything that is not only made of sheet metal, but that we deliver a complete product from one source. This means all forward and work below as CAD design, electroplating, powders, painting, screen printing, etc. are done by us. We offer the complete design of a product and the production according to your wishes. Attached you will find an overview of our manufacturing capabilities.

1872 from an idea a reality. With the production of locks, Africa godfather and machetes, the company founder Heinrich Schmidt took the plunge into self-employment. The company produced for the domestic needs and for export to the whole world. The delivery was carried out under its own and also under the trademark of exporters. 1925, the mainstay of Agricultural Engineering was established. In particular, agricultural wear parts have been made for tillage. These were among other things, grubbing shares, cutting blades, angle coulters, ridging etc. of the leading manufacturers of agricultural machinery. In the whole of Germany and western Europe were and are these products their application. Since the 60s, the range has been expanded by the introduction of the Sheet Metal and processing and the production of animal traps of all kinds. The pressing, stamping, punching and bending parts are produced mainly according to customers drawings and samples and finished or coated as desired. Our forward-looking machinery is constantly being improved by new machines. The guarantees with experienced and trained personnel for highest precision and quality in the entire manufacturing spectrum. Through our research and development department, the products of a design verification are subjected. Here, the product or the working process is developed as needed. In August 2008, we have our machinery increased by 2 other press lines. Press forces up to 400 tons. and a material width up to 500 mm are no problem now. This also sets with up to 100,000 pcs delivery lot can now be made efficiently.

We are your specialist for pressing, stamping and deep drawn components for all levels and materials, welding (MAG, TIG, resistance welding), laser machining, nibbling, edging, drilling, tapping, processing all surface finishing, component assemblies.

Since 1993, we are a Turkish steel market. As an experienced company in the field of stainless steel sheets and tubes, we give our customers good service and fast at cutting + bending of stainless steel materials. We have a large warehouse and a service center in the Turkish city of Izmir. We can customize your orders carefully, clean, fast and processed at low prices. For any questions please contact us at any time. With our subsidiary "Prosac" we operate in the following areas: - Sheet Metal Fabrication - Bending and folding - Laser cutting 2D

We specialize in robot welding, laser cutting, bending, forming and deep drawing. We offer productions of parts and units for agriculture machines and equipment, trucks, trailers, machines for grains processing and storage, seeds cleaning and treatment, hydraulic power units, elevators and much more. Our clients are mostly from Bulgaria and from Europe, with many of them leaders in their industry, with a turnover of billions. CHROM AD was founded in 1965 in Silistra, Bulgaria as a result of separating the press division of the company for metal processing machines. Today we employ over 60 employees, with 5 000 sq.m. facilities and our services include: Robot welded constructions and components Laser cutted details Deep drawn and stamped parts

At the firm. DFT PRESSWORK A / S is a family-owned Danish company that can look back on over 35 years of experience in the fields of extrusion, stamping, deep drawing and sheet metal processing. It was formed by the merger of the companies DFT - Danish Impact Extrusion Technology A / S and PressWork A / S, and the company is located in the premises of the company Danfoss in Nordborg.. Danfoss cold extrusion and sheet metal work were taken with respect to, among others tasks. It employs around 90 employees and there are 25 fully automatic production lines available. This allows the production of small series as well as large series - up to 15 million units annually. The company DFT PRESSWORK A / S is one of the most important suppliers in Europe, not least due to his expertise and his production techniques. The clients come from different areas, and these include manufacturers of automobiles, truck accessories, hydraulic components, thermostatic valves, machinery, etc. They all have high expectations regarding delivery time, price and quality requirements. Furthermore, they may with low production costs, expect quality products, flexible order processing and reliable delivery.

We sell sheet metal parts for automotive, industrial, consumer goods and pharmaceutical applications. Our portfolio includes deep-drawn parts, fine-stamped parts, stainless steel pipes, pipe fittings and assemblies. We act as a sales location in German-speaking countries for our international partners. Deep-drawn parts: Made of steel, stainless steel, aluminum, brass, copper Material thicknesses from 0.07 - 3.0mm Component length up to 120mm, diameter up to 80mm own tool shop Fine stamped parts: Made of steel, stainless steel, aluminum Material thicknesses up to 17mm large press park with 400-1400t press force own tool shop Stainless steel pipes: laser-welded, in fixed or manufacturing length Diameter 6-210mm

We are Slovenian engineering company in the field of mechanical engineering.We are present in various sectors of the industry across Europe (Austria, Germany, Switzerland and Netherland) Our advantage is that you as our customer have only one business partner who covers the entire EX-YU market for products. We also guarantee our clients a timely delivery and the quality. of your orders.

Emerging from a locksmith, founded in 1946 in Wattenbek (Schleswig-Holstein) has the Henning Dierk machine and Appparatebau GmbH due to the constant development and expansion of its manufacturing technologies over the years to become a powerful medium supplier for sheet metal parts / metal parts and assemblies mounting developed, as well as competent and reliable partner, flexible now divided into two production sites. To produce high quality sheet metal parts and assemblies a team of experienced and motivated employees is at the Henning GmbH Dierk next to a modern machine park requirement. The long-term and clear corporate philosophy helps that customer requirements are fully met in close cooperation with our customers and suppliers. In the center of all our activities for decades is the customer and their satisfaction. Our aim is to offer cost-effective solutions for our customers, thath short manufacturing and delivery times, a fair price / performance ratio and a consistently high quality of production. This is exactly where our strengths lie. Take advantage of it! We look forward to your projects. We supply to customers from different industries such as - Machinery and equipment - Interior Finishing - Warehouse - Ventilation and Klimabau - Electrical industry - Medical Industry - Authorities Materials - Steel - Stainless Steel - Aluminium - Copper - Brass - Plastic

We, the FEBU are a medium-sized company with 29 employees, and headquarters in the industrial area of Burbach – Würgendorf, plant road 19, with direct connection to the A45. The foundation of the company FEBU dates back to 1965. At that time the father of the current managing director Andreas Fey started with the production of punching, pressing and drawing tools, as well as with the production of windshield washers made of metal, in the rooms of his parents’ house. Due to the increasing demand, the constantly growing space requirements were initially met with the construction of a 150 m² production and storage hall in Burbach-Holzhausen in 1970. Due to the further steady growth of the company, the production and storage areas were moved to Burbach-Würgendorf in 1988, not least because of the favourable transport connections. Through expansions in recent years, a total of 5,350 m² of production and storage space is currently available. In the following years the product range was extended in all areas. Stamping technology With the founding of the company in 1965, the production of the first stampings for the company’s own windscreen washers and water slides began. In addition to the production of stampings for the company’s own products, other customers were quickly acquired and sales were continuously increased through constant investment in the latest machines. Thus, the most modern automatic punching machines and eccentric presses up to 200t pressure are available. For further processing, we have welding presses, automatic threading machines, as well as stud welding equipment and various special machines. Here a production can take place on tools manufactured by us or provided by you. Among steel (blank, galvanized + coated) and stainless steel we also process non-ferrous metals. Injection moulding technology With the decision of the current managing director Andreas Fey in 1993 to implement the production of plastic injection molded parts for the ice scrapers and windshield washers in house to be able to react faster and more flexibly to customer requests, he laid the foundation for the current 16 machines comprehensive injection molding production. After the purchase of the first injection moulding machine it did not take long until further articles from other areas were added and the first 2-component injection moulding machine was purchased, first for the production of the first own 2-component ice scraper, later also for further customer-specific articles. Gradually, the injection moulding production was expanded and finally, with the takeover of the company Schmidt Kunststofftechnik (founded in 1955) at the Biedenkopf-Eckelshausen location in April 2020, a second location was added. Toolmaking The in-house tool shop, with which the then founder of the company Horst Fey laid the foundation stone, is still the pillar of all production areas today. Thanks to our ultra-modern tool shop, we can react quickly and precisely to customer requirements and maintain our tools accordingly. Here we design and manufacture punching and injection moulding tools with a tool length of up to 2,000 mm, as well as fixtures and mountings for various machines. Cleaning equipment and ice scrapers The production of cleaning equipment includes the production of metal windscreen washers and water sliders, as well as the production of various plastic windscreen washers and ice scrapers. By investing in the most modern machines and developing our own products and tools, we are still able to produce competitively in this field. Since its foundation in 1965, FEBU has been able to establish itself throughout Europe. The export, also beyond the European borders, shows positive figures. Due to a manageable number of employees the company remains flexible and can react quickly to special customer requirements.

MEGA Int'l in Roermond NL/Neeritter was founded in 1996 as an engineering firm and quickly expanded its portfolio with a large number of trading activities arising from the wishes of customers who, in addition to familiar development concepts, also purchase machine parts, machine modules and even complete machines entrusted to MEGA Int'l. MEGA Int'l Roermond/Neeritter works closely together with a large number of European and Global top producers specialized in a wide range of production and product disciplines that can cover a considerable part of the needs for machine manufacturers. MEGA Int'l is capable of using it suppliers to play an important role in cost price improvement in order to stay ahead of the strong global competition, in terms of price and technique.

Deformation of cold rolled strips with press: In the field of classical stamping production is possible on eccentric presses from 40 to 250 tons, as well as hydraulic presses up to 250 tons. The product size ranges up to about 500 mm in length and 4 mm in thickness. Fine blanking: Fine blanking is a special technology or so-called punching "without air" between the Schneidematrize and the knives (0,5 - 1,0%). This method is especially useful for highly sophisticated products in question, which are dentate different. The maximum length is about 500 mm, and the maximum width of 6 mm. This allows the tolerance of + / - 0.01 mm, a uniformity of the cut edge and the clipping with minimal needle on the edge. Drawing and deep drawing: Deep drawing is a mode of production, with the preparing various hollow shapes such as rivets, drawing dies, industrial electric parts and the like. The diameter ratio to the length is up to 1:2.5. Of course, these products have a smaller extent, forExample up to 20 mm. Screws: TKG doo manufactures screws of the small range in diameter from 2 to 6 mm and using the most advanced technology of cold deformation, which has displaced pivot screws in the world due to their cost-effectiveness. TKG provides doo screws forth in accordance with the ISO and DIN standards. We also produce special screws design according to the plans and patterns in collaboration with technologists and designers of customers. Screws can be thermally edit and galvanically protect, depending on the location and type of operation.

The company Brero Engineering Srl was established to meet the needs of worldwide customers in the Tochterfimen Brembomatic Srl and Brembotecnica Srl. Thanks to the support of an experienced engineering team, we are able to handle many machining processes as the prime contractor. In addition, thanks to the mutual trust and the solid partnership succeeds Brero competitive to be (in terms of quality, service and price). The company can deliver in every area of complex technologies with the support and cooperation of competent companies.

D + M Z��gel GmbH was founded in 1984 in Schiffweiler / Heiligenwald. In 1989, the company relocated to Überherrn / Altforweiler in the industrial street. Since that time our company has grown continuously. Already in the founding year, we became suppliers to the company John Deere, CLAAS and Kuhn. In order to meet customer wishes and requirements, In 1995 our production was extended to 3 halls. In 1996 Rubber Technology became reinsurer of Terex Demag. As a medium-sized company, you will find our products everywhere, where precisely stamped and processed parts made of rubber or PVC for the Industry needed. Through close cooperation with our customers we are able to optimal solutions and dimensionally accurate products - also in economic Respects - to offer. Our expertise, our modern production facility and our high Quality standards guarantee consistent quality and punctuality Delivery of our products. Our quality standard has been decreasing since 2002 DIN ISO 9001: 2008 certified. With our experience and our technology, we are the right competent Partner for your business to meet the challenges of the future to encounter. Our long-standing customers confirm our capabilities grown partnerships.

MaS - Solutions offers top-notch surface finishing and industrial painting for small parts, as well as assembly of components. Our expertise in surface refinement and precise assembly processes ensures the highest quality and efficiency. Trust us to deliver your components in perfect condition and on time. We are your reliable choice for industrial solutions.

Stamping with tool making and slitting line

Rosco Eko-Tech Sp. z o.o. is an engineering company established on the European market in 2009 as an independent subsidiary of an enterprise operating mostly on the German market, i.e. Rosco Polska Sp. z o. o. since 1994. The main direction of our operations is comprehensive services in the field of supply and installation of steel devices and structures. From the outset of our operation, we work for European customers offering them the best Polish performance verified by the experience of many years. We products of the highest quality acquiring the trust of customers. We especially try to assist with the optimisation of technological processes and implementation of environmental protection solutions.

We are an international supplier for customer-specific metal and plastic components. A leader in customization and increasing your profitability for over 15 years. Creating a customer-specific product is not based on a simple choice: matters such as critical tolerances, functionality and determining the most optimal production method are some important aspects. The application of the product, the test methods and the desired quantity of samples will also be discussed. In addition, logistics parameters such as delivery times, packaging requirements and desired stock levels will be reviewed. Once the product has taken its final shape, it is essential that it remains in safe hands. Building and maintaining a high-quality and sustainable product with the associated services is just as important to us as the relationship between you and us. Norms, values and interests are in line with each other. Our current delivery options focus on the following techniques, among others: Forming techniques, Welding techniques: MIG / TIG, electrode welding and soldering Machining techniques such as turning and milling (CNC), drilling, tapping Surface treatments: powder coating, KTL, electrolytic galvanizing, hot dip galvanizing, chromating Casting techniques: sand casting, injection molding, lost wax casting with or without finishing Plastic injection molding Aluminum extrusion Assemblies and special fasteners. Naturally, any desired packaging or delivery method is possible. www.fourtec.nl