Consortium of companies active in the development of foreign markets. It acts as an export sales department for a number of SMEs located in Italy, all operating in sub-supply in the mechanical engineering industry. Our partners can offer, among others, the following main operations - Turning - Milling - Grinding - Sheet metal cutting and bending - Sheet metal forming - Assembling - Complete sub-assemblies - Sheet metal forming - Welded construction - Assembly of assemblies

Our company since its founding in 1780 to the processing of metal and has successfully specialized in the course of the last century, among other things stamping and wire bending technology. Technical possibilities Stamping:  punching machines from 40 to 400 tons of pressure  all material qualities: bright, galvanized, aluminum, brass and stainless steel, from 0.5 mm to 5 mm  plate widths from 20 mm to 450 mm  component connections in the tool (metal and plastic)  sequence editing and Follow-on composite tools  finished catching products  surface treatment Wire bending technology:  different wire bending machines  wire thicknesses of 2 mm to 10 mm  processing of bare, galvanized, stainless steel and aluminum wires  finishing operations: * Welding, chamfering, recesses, threads * Cutting, drilling, crushing, etc.  component connections (metal and plastic)  surface treatment FOX is already active internationally and seeks to improve its national and international presence and continues to edit about potential promising Neumärkte / Neubranchen intense.

Our customers are offered everything they need within our group of companies, all in one basket: from development and project management via the production of tools for plastic and metal fabrication, through to manufacturing the parts. In this way we closely co-operate with our customers in developing functional structural plastic and metal components on the basis of the design, thereby achieving an optimum combination between plan, design, manufacture, and cost structure. The integrated possibilities have enabled us substantially to shorten the project run up to the point of series production. The systems Pro-engineer and Catia, available to our staff, permit the creation of structural components and tools, "in one casting" as it were. Injection Moulds Our staff in the individual manufacturing areas have state-of-the-art technologies and most up-to-date machines (such as 12-wire and 15-wire cavity sinking EDM machines) at their disposal. In producing moulds with a guaranteed number of shots, especially for the automobile industry and consumer electronics, our dictum is precision and quality. This holds true for injection moulds, diecasting, duroplastic, two-component, rotating, transfer and insert/outsert moulds, just as much as it does for two-colour moulds, combinations of hard and soft plastics, automatic wire leads, in-mould decoration, and precision gear wheels. Rapid tooling with the aid of our EOS metal sintering machine M250 Extended makes it possible to produce mould inserts for injection moulds and prototype tools within a very short time. Eighty moulding machines in Vienna and Hungary, with a clamping force of between 25 and 1,100 tons, offer all the possibilities of manufacturing moulded, thermosetting and duroplast, gas-injection moulded, two-component moulded, insert and outsert moulded, as well as in-mould decoration parts. Our machines are equipped with automatic robot systems, and automatic packaging lines complement the production line. Vienna: 3-shift operation / technical products and precision parts with a mould clamping force of up to 500 tons, Hungary: 4-shift operation / technical products and design parts with a mould clamping force of up to 1,100 tons. Your plastic parts are coated in three fully automated painting lines on a water-soluble basis (single-component or two-component coating). Your metal parts are electrostatically painted, from the smallest parts up to housing coatings for consumer electronics.

In 1877 the company was founded Uebele. Since then the company has grown steadily and today offers the complete program around the punching technique. We manufacture high sophisticated tools, high-precision fine blanked parts, stamping parts, bending parts, stamping and deep drawn parts and metal pressing parts. The assembly production and the production of small and large series are part of our extensive range of services. For our national and international customers, we manufacture complex parts on the following presses: - Deep drawing presses 400-4000 kN (table size up to: 2,000 x 1,300) - Automatic punching 400-6300 kN (table size up to: 3,000 x 1,500), - Fine blanking presses from 1,600 kN to 3,200 kN, - Pressing machine to Dm 900 x 5 mm - Press brakes up to 1,500 mm long Materials / Materials: Steel, stainless steel (1.4301 / 1.4571 / 4310, etc.) and non-ferrous metals such as aluminum, copper, bronze and brass, and substance capable plastics. Sheet thickness: 0.05 mm - 10.0 mm Coil: 300 mm x 10 mm and 1000 mm x 8 mm Product Line / products: Fastening systems for photovoltaic systems such as roof hooks, shielding, Cell connectors, mugs, fittings, spacers, flanges, housings, holders, sleeves, Contacts, discs, covers, clamps, braces, disc springs, angles and gears Toolmaking The following services offered by our professional expert toolmaking: - Project development to series production - Tool design - Prototype production - Construction of composite tools, drawing tools, stamping tools, bending tools, Fine-cut and cutting tools as well as devices Subsequent processing - Vibratory grinding, brush deburring, drums, tape loops with automatic feed - Heat treatment - all standard methods (inter-stage hardening, Nitriding, Hardening, and Nitrocarburizinga) Surface Finishing / Surface coating - Powder coating, KTL, painting - Electroplated coatings of Au to Zn / Ni (chrome plating, galvanizing, burnishing) Assembly production As a system supplier, we offer our customers from different industries all from a single source - from product development to the mounted assembly. - Inert gas welding (TIG / MIG / MAG) - Robot welding - Stud Welding - Spot and projection welding - Pressure joining (Clinching / clinching) - Riveting, caulking, gluing

İNOKS DEMİR SAN.VE TİC.LTD.ŞTİ. has been serving in the metal industry for 12 years. Our organization is known for excellent work, constant communication and an emphasis on customer service. Here are some details for you to get to know İNOKS DEMİR better: Founding and History İNOKS DEMİR was founded in 2012. Since our establishment, we have successfully completed numerous projects and become a major player in the industry. We pride ourselves on our history, quality and expertise. Mission and Vision Our mission is to provide services at the highest level accessible and to promote excellence in projects. Our vision is to be a company that is fast, continuous, proactive, open to change and also specified. Products and Services İNOKS DEMİR offers a wide range of products. These products include: • Furniture decoration (coffee table, table, dresser, bookcase, separator, mirror, songs), • Store equipment, • Hotel decoration products projects, • Sheet metal laser cutting, press brake bending and static powder coating works There are. In addition, we adapt all parts such as laser, cutting, bending and painting in-house and achieve successful works. Customer Experience and Satisfaction Customer satisfaction is one of the visibility of İNOKS DEMİR. We work closely with partners and strive to complete their projects on time and on budget. Positive feedback from them is the greatest motivation for us. Why Us? INOKS DEMİR has many parts from its competitors. Here's why you choose us: We are an experienced and expert team. We are committed to perfect processing and high quality. We always put the customer first. We offer competitive prices. İNOKS DEMİR is a reliable partner for your projects. With us, you can find the expertise and quality you need to sustain your projects and bring them to life. Contact us for more information and find out how we can help ensure the success of your project. İNOKS DEMİR – Serving you will make us happy"

The metal stamping is the activity on which it was founded Adveco, so that our company boasts 50 years of experience in this area, creating internally diverse machining, as deburring, chamfering, countersinking, threading, assembly and possible packaging with customer's logo. With a constantly updated vehicle fleet to the needs and market changes, Adveco today has thirty eccentric presses with force from 50 to 600 tons, press brakes and shears CNC. In recent years, Adveco printed cold both standard pieces of design for the most diverse areas of application, including the main surely construction, plumbing, automotive, home appliances, lighting and objects of all kinds. Around the shearing process is carried out in compliance with the UNI ENI ISO 9001, ensuring maximum customer satisfaction, both for the high quality of particular products, which for speed and flexibility in production.For this reason, Adveco is able to produce both small and large batches, depending on the specific needs of the customer. The extensive experience in the cutting of metals, ferrous and non, also allowed us to forge a long-term collaboration with serious and reliable partner, bringing to propose a complete service, from design and construction of molds to surface treatments such as hardening, welding, painting and galvanizing.

Powerful master craftsman business in the 4th generation in Cunewalde, Saxony. With his son Robert Jeschke, the 5th generation is already in the starting blocks. Our services at a glance Punching work • Brazing • TIG welding individual production • also small quantities

We are an industrial and commercial agency with direct suppliers and production facilities in Poland, Czech Republic, China, Italy, Taiwan, India, Turkey and Germany. We design and produce together with our partners to our customers in the following areas: Welded structures such as caddies, storage racks, long-product pallets. Steel construction, welding in general. Surfaces such as rays, galvanizing, painting, powders. Sheet metal processing all materials: CNC punching, nibbling, edges, laser welding, cutting Fully automated bending center, powder coating, Deep drawing, laser cutting, punching from coil, components, Services according to customer requirements Turned parts, milled parts made of all materials Castings and their processing Plastic injection molded parts up to 2,500 grams weighing, + Toolmaking Extrusion plastic profiles Aluminum profiles and their processing Cable assemblies, wire harnesses, control boxes and control cabinets completely Agricultural Engineering Bent wire parts Diecast Bend and process tubes

Punching and metal forming since 1939 The company was founded in 1939 Hohage in Halver and is still family owned. Since 1998, we develop and manufacture 2,200 m² at our location in Kierspe. With about 20 employees will be produced there in close cooperation with our customers in industry and commercial products of stamping and forming and building hardware and hinges. Lean structures and short information paths lead to customer-oriented thinking and acting. Parts are timely developed and manufactured inexpensively and with high quality standards. Our own design and own tool help to create a quick and smooth transaction. Scharniertiel, hinge elements, Stampings, holder, assemblies, ... Talk to us, we are here for you. Zeichnungsztiele, Stampings, Parzielles fine cutting, tapping, stainless steel parts, Prouktentwicklung, house design, house tool, DIN ISO 9001:2008 In the past we have made: Hinges, narrow, semi-wide, Käntig, Tischbänger, chest straps, Embossed hinges, Profielscharniere, Kreuzgehänge, Werfgehänge, shutter hinges, hooks, brackets, Winkelberbinder, chair angle, wide angle, angle of rotation, furniture elbow, tee-angle, connecting plates, wood connectors, joist hangers, flat connector, elbow connector, box fittings, box handles, container fasteners, box - protective corners, br

Polytech-lab is a center that inherits the tradition of three generations of designers and manufacturers. Our vocation is to provide the theoretical and practical tools for the conception, engineering, implementation and testing of projects ranging from precision mechanics, component technology, industrial design, to architecture and visual arts. The experience gained in the field of traditional construction techniques is combined with a continuous process of research and experimentation aimed at innovative digital design and manufacturing technologies, while an ever-expanding network of partners allows for the organic management of the complex of different phases necessary for the materialization of the project. Indeed, the laboratory provides a network of knowledge embedded in the most important manufacturing realities of the market, matured over decades of fruitful and systematic collaboration. An overall vision of the methodological and pragmatic landscape in the field of drawing and design, together with a layered knowledge of traditional and digital fabrication techniques, passing through a genuine creative flair in the formulation of strategies and the realization of the equipment necessary for the industrialization of the project, are the factors that make Polytech-lab the ideal place to develop and realize your ideas.

We, Metallbau Schmalenbach, specialize in manufacturing a wide variety of high-quality and tasteful stainless steel and corten steel accessories. Years of experience in working with metal products, experienced know-how and the gift for exceptional design give our products uniqueness. The focus is on narrowing down to the essentials. In a charmingly flooded world, peace and relaxation are important to us. Simplicity is the goal and with it the uniqueness of our products. In addition to our wide range of products, we also offer you the opportunity to have your ideas implemented. We offer you custom-made custom-made products. You are welcome to visit us at Linienstr.14 in 42289 Wuppertal.

As a high-level supplier of solutions for drive and chassis technology, we develop and manufacture innovative tools and thus produce technically advanced precision parts. The know-how to react flexibly and dynamically to rapidly changing requirements in a competitive environment, makes us an important partner for our customers. This includes the ongoing optimization of our solutions and designs and perfect quality management. We are a successful family business. Our philosophy is the combination of tradition and technical know-how with the latest technology, highest quality of service and a strong customer loyalty. For 50 years, is the basis of our success.

With Lusch, you can produce quickly, effectively and cost-effectively!

RUDA-Metall GmbH The company RUDA-Metall GmbH was founded in 1982 and has its manufacturing focus in the area of technical stampings. Here components for the automotive industry and its suppliers and the electrical industry are manufactured for years. The modernized about 2 years ago vibratory finishing system, we can achieve the best results even for your parts. The tools are designed and manufactured in our own modern tooling. In 1994, with the company K.Fr. Brahm, consisting since 1868, a group of companies founded. The K.Fr. Brahm manufactures focus: furniture fittings, hinges, stampings for light domes, scaffolding, electrical parts, office furniture and fittings for the mirror industry. In order to work more efficiently and more cost effective for your customers in the future, the K.Fr. was Brahm 1-1-2006 integrated GmbH in the company RUDA metal. Our Lord Dannhorn (Dip.Ing. Engineering FH and Dipl. Economics FH), as well as our technicians and master craftsmen to support you in the optimal and cheapest design your parts.

Welcome to the UF Industries GbR. For more than 20 years, we have been bundling the necessary skills for everything to do with drawing parts in a separate department. Our employees advise and support you in the procurement of tailor-made special and drawing parts and produce high-quality and precise turned, milled and combination parts for you according to drawings - even in demanding geometries and in small batch sizes. Quality and function are our top priority. In order to achieve this, we are constantly developing ourselves and our portfolio. True to the motto: If you stop getting better, you stop being good! Our aim is to be able to offer an efficient and optimal solution for every specific, mechanical-technical requirement based on a drawing or sample. If required, we offer you fast and goal-oriented support in the realization of your constructions. Especially in the project phase, it is of crucial importance to choose the best, most modern and at the same time most cost-effective production technology. We would also be happy to optimize existing construction parts together with you.

JG AUTOMOTIVE: Developer and Supplier in the manufacture of metal parts JG Automotive was founded in 1982, dedicated to the manufacturing, development and supply of metal components for the automotive and industrial sector. Thanks to the mastery of the technologies of manufacturing of metal products specifications provided by clients, we have diversified the industrial sectors of performance and optimized our work processes. In 2002, together with 18 international partners, we created Global Alliance, a large group with 230 cooperative engineers, manufacturers in Brazil, Germany, China, India, Italy, Japan, Korea and USA, among others, managing a joint turnover of € 1,720 M. Dozens of companies in the automotive, energy, railway, agricultural, elevation, etc. sectors, are already among our customers and fortunately for us every year we continue to grow thanks to the trust of our customers and the incorporation of new ones. Our products are presented with their corresponding quality certificates (IATF / TS / ISO / CE / PPAP). In short Technology and high competitiveness in products to specifications provided by clients. TECHNOLOGIES: Forging, Casting, Machining, Stamping, Laser cut, Welding, Raw Material, Microforge, Microfusion, Fasteners, High Pressure Cylinders, Hydrogen cylinders for hydrogen filling stations, Toolings, Precision Bar Turning and Special Parts, Inserts and Profiles, Tubes SW and DW and Rod Formers, Springs, E-mobility, Precision Gears, Bearings, automotive plastic injection parts and Returnable packaging of metal parts.

Versatile and varied ... is our world with sheet metal! A flexible manufacturing spectrum to meet the needs of our customers is the driving force of our company. Builds on the fixed rate for 60 years, a number of well-known customers. Our clients rightly trust in our experience and our know-how. They appreciate the constructive cooperation as well as the passion for performance and quality. "Presses, punching, pulling" here in Burgbernheim our daily success factors. "Precision, economy and time" are the obvious constants for series production and assemblies. Our manufacturing capabilities include pressing, stamping, drawing and stamping parts and CNC punching, laser cutting and bending. Further processing, such as welding, electroplating, Powder coating, etc. are of course also to our possibilities

Development, production and testing of prototypes and production tooling, manufacturing of complex deep-drawn parts in small series