VDL TIM Hapert BV is a specialist in the mechanical processing of cast, welded,forged and other ferrous parts. Due to our experience we built up a worldwide purchase network for raw castings and forgings. Through automating, robotizing and continuously investing in the improvement of our organization we are always aiming for maximum productivity. Quality and environment is important so we are ISO/TS 16949 and ISO14001 certified. We belong to the VDL Groep BV, an international organization with some 7200 employees at more than 70 operating companies. These companies are divided in 3 different divisions; supplying companies, buses & coaches, and other end products. Because we can simply use the expertise of our sister supplying companies we are often able to offer our customers complete solutions.

LSI Lamiere Speciali Inox Spa, stainless steel coils, strips, sheets and quarto plates LSI SpA was founded in 1986 as a service centre for stainless steel flat products. Throughout the years, continuous investments in modern equipment, our experience and our reliability have allowed the company to expand to its present size. Hot and cold rolled coils are cut into sheets, strips and blanks of the size required by the customer. The material can undergo surface processing such as grinding and scotch brite and then be protected with adhesive plastic film.

As a medium sized metal processing operation, the MEMSAN CNC technology on behalf of customers turning and milling parts - preferably in CNC Production - ago. We are a very reputable and modern company in Turkey. With machine services such as wire EDM, sinker EDM, CNC milling, CNC lathes and SPRİTZGUSSMASCHİENEN we specialize in matrices, Models, dies, molds and plastic molds of any kind The range of products manufactured by us ranges from parts design parts, eg for the automotive industry to complex installation parts in assembly groups. The convenient location of our location in Turkey (Samsun is the largest Turkish city on the Black Sea), we are close to the latest developments in cutting technology and are on schedule, fast, cheap and reliable to supply capable of a large part of Germany . We have a lot of know-how ... and little bureaucracy. In MEMSAN CNC TECHNOLOGY They are not passed from department to department and your messages do not remain in complicated communication channels stuck. Speak to the boss or his representative. Our "young" generation also gained several years of practical experience in one of the big car manufacturers in Germany. Way we can respond flexibly to rapidly changing requirements of our customers. Our well-established team makes for almost anything possible. Tooling and injection molding from a single source, an interaction that is worthwhile. High-performance molds for large-scale production, low-cost molds for small series, tailored for your injection molding products. We are able to manufacture injection molding technical parts 2-600 g piece weight. With our computer controlled injection molding machines, we determine the optimal manufacturing parameters. This allows any time the exact reproduction of the parts. Also accessible via MSN.vmatur76@hotmail.de You can also visit our company live under http://81.214.67.120:5555 besichtigen.wichtig without www.

Punching, bending, deep drawing, CNC and manual push technology, tooling and design for single, progressive and deep drawing tools Stamping bending, deep draw and CNC and manual spinning technology, tool dersign and production for single tools, progressive tools and deep draw tools

We have been working in the electromechanic and industrial and civil electrotechnic sector, automotive sector, electric appliances components for heating systems, windows and shelves etc. since 1972 shearing and pressing cold plates to realize finished metal parts according to technical project and drawings of our customers, we study, project and realize all the necessary toolings to stamp the parts. Now in order to be more competive we invested in new machines to automatized our production and we are organized for automatic working for big series but we can work small quantities too. Our machine parc includs: AUTOMATIZED MULTI-THREADING MACHINES Capacity to thread up to 50 holes simultaneously with SCREW up to M8 utilising rotary tables. AUTOMATIC PRESSING AND STAMPING PROCESSING LINE We utilise LAYER-ON up to 500 X 5 mm with K/O control We realized sophisticated toolings able to include in one operation only all that workings which were achieved with more steps. We are equipped to work cutted metal plates and coils from 0 to 10 mm (iron, steel, aluminium, brass and copper) with presses up to 350 tons. Moreover thanks to a cooperation of qualified companies in our area we can supply if necessary, finished items complete with welding, varnishing, galvanic treatment ecc. We are certified ISO9001:2000

Thermotec AG is an experienced producer of sheet metal components and assemblies through to the assembly of packaging for consumer products. This know-how with the expanded capacities can now be used for company growth.

Foundation of our firm is dating into year 1993, when we came to market whit offer of wire program. We expanded our existing program of wire products in the year 1999 to new production from tubes and jokl which are surface whit health free powder color, polyetylen synthetic, chromating. We have started to act under official sign Juraj Zubáň DROTOV after this changes. Housing and office accessories, shopping and industrial goods, facilities (baskets, metal supply, holders, mirrors,....) are creating part of our production program but also accessory attendace, service connected whit production - carriage, knowledge consulting.. Our goal is to improve and make more efficiency flexible production to maximal satisfaction of our client and constantly develop and spread product assortment.

Since 2005 we develop with our partner companies, new approaches and innovative solutions for the production of technical parts and assemblies. Our slogan "New Thinking! New action! New ways! ", We carry a competent and reliable contribution to your company's success. We advise our customers both during the product development process as well as the optimization of existing products in terms of the structural design, as well as on the use of suitable production methods and materials. We specialize in rotary swaging, spin forming, cold forging, machining (cutting all kinds), sintering, MIM, hot forging, stamping, deep drawing, sheet metal forming of all kinds, die-cast zinc, cast aluminum, cast iron, fasteners, ductile iron, cast iron and lots more! We enable potential costs through the re-design of your purchasing parts with the help of TRIZ methods, value analysis and Attributive sourcing.

WKK Kaltbrunn AG - enormously in form The beginning of the WKK Brunn AG is founded in 1967. As a dedicated tooling the company had at that time only one purpose: the production of cutting, bending and forming tools. Shortly thereafter, the fabrication shop was put into operation and some ten years later, the company introduced her first own product. By continuity, innovation and perfection was out of the formerly peaceful Toolmaking a successful SME with about 45 employees.Today, the CHP is an international punching operation with most modern manufacturing methods in the supplier sector. enormously complete - from the first idea to the final series, we offer comprehensive services - Consulting: individual and professional, on-site or at our - Construction: in-house with 3D Autodesk Inventor - Prototyping: short to illustrate your ideas - Tool: for punching tool and teaching building, with modern machinery - Series production: stamping products of all types up to 250 tons of pressure and up to 300 mm width at 3 mm thickness (up to 5 mm after consultation) made of steel, stainless steel, non-ferrous and light metals - Component manufacture: Total manufacturer of your products, automated assembly - Post-Processing: Heat and surface treatments for partners near - Finish machining: by machining (milling, turning, drilling), eroding and vibratory finishing - Did you know? Also welding

N&H Technology – Your Development Partner for Custom Components, HMI Solutions and Electromechanical Assemblies Since 2001, N&H Technology has been your certified system supplier for tailor-made electromechanical assemblies, technical components and HMI solutions. Our focus lies in the development and serial production of plastic, elastomer and metal parts – including multi-component solutions (e.g. 2K/3K technology, rubber-metal combinations). Our portfolio is complemented by customized input systems such as silicone and membrane keypads as well as cable assemblies and connectors. Whether precision-molded parts, elastomeric functional elements or complete input units – we realize your project reliably from concept to series production. ++++ Our Capabilities: ++++ Technical Components & Housings • Injection-molded parts made of thermoplastics, high-performance polymers and fiber-reinforced materials • Silicone and rubber components incl. seals, protective covers, keycaps • Die-cast, milled, stamped and turned parts made of metal • 2K/3K components and hybrid solutions (plastic/metal, rubber/metal) ---- HMI Components & Input Systems • Silicone rubber keypads, membrane keypads, capacitive keyboards • Stainless steel and hygiene keyboards • Touch display units & full HMI assemblies ---- Connectors & Cable Assemblies • Spring-loaded contacts, magnetic connectors, custom plug solutions • Cable assemblies: data, coaxial, ribbon and hybrid cables • Assemblies with integrated interconnect systems ++++ Our Services: ++++ Engineering & Development • CAD design, feasibility studies, DFM optimization • Prototyping using 3D printing, silicone casting or small series production • Tool design including mold-flow simulation ---- Project Support & Quality • Technical consulting from initial concept to series approval • In-house testing laboratories (mechanical, electrical, optical) • Certified & exclusive supplier network according to ISO 9001 and ISO 14001, optionally IATF 16949 and ISO 13485 ---- Procurement & Logistics • Procurement of third-party components & system integration • Final assembly, end-of-line testing and logistics including buffer warehouse in Germany ++++ Industries We Serve: Automotive · Medical Technology · Telecommunications · Building Automation · Industrial Electronics · Measurement & Control Technology ++++ N&H Technology stands for engineering expertise, flexibility and trusted partnership. We combine customer-specific product development with efficient manufacturing – delivering reliable and cost-effective solutions in series.

Cautis JB 93 GmbH was founded in 1993 by the Cautisanu family and is ISO 9001: 2015 certified. Even now our company is still family-run. After many years, the company has become one of the largest, best-known, most respected and competent companies in the branch on the Romanian market, with a lot of experience also in orders for export customers from the EU area. With the help of more than 80 permanent and very experienced employees, but also with a machine park that is regularly renewed, we are able to offer our customers professional solutions for the processing of various metals. In addition to our extensive experience in laser cutting and laser welding, we can also offer you bending, pressing, punching, milling, turning, spray painting and electrostatic painting, all from a single source. All of these specializations have helped us acquire many orders for the construction of special sheet metal constructions, for example in ambulances or fire engines. In addition, we have also, for example, in recent years. ecological garbage cans (with CE certification) and street furniture such as tables and chairs for Patios or park benches. If necessary, we can organize the transport of the products to the customer.

About us Kreutz & Mock is a medium-sized company and the leading manufacturers of wire bending parts of all types. With over 3000 different articles we can offer our customers a wide and diverse range of different wire products. The necessary machines for the production are developed and built in-house by our own engineering department which gives us the possibility to always be flexible according to our customer's needs. You can find further details about us and our philosophy on our website. Products We manufacture wire bending parts in all sorts of variations and models. We supply many industries with our products like the automotive industry, construction industry, agriculture, blinds manufacturers and many more. We also have numerous technical bent parts in our repertoire. We are happy to try to achieve your specific needs and requirements, because quality, punctuality and being in step with actual practice are our basic principles to deliver high quality as well as best functionality products. It does not matter whether they are single quantities, small quantities or a large series. We are flexible and deliver quality at fair conditions. We offer + Qualitycertficate DIN ISO 9001:2008 + in-house specified tool construction + in-house machinery construction + quick production of samples + technical and experienced know how + skilled telephone service + large production spectrum Materials Every material processed in our factory has a dedicated inspection certificate that will be provided with your delivery on request. We manufacture bent wire components for you in all variants and materials. Here a selection of the materials used: + Stainless steel wire 1.4301, 1.4310, 1.4362, 1.4401, 1.4404, 1.4571 in different tensile strengths + Spring steel wire 0.9 mm to 6.0 mm. Qualities A, B, C, D + Steel wire C9D bare or copper-plated. C9D soft galvanised in 1.0 mm to 8.0 mm + Crapal wire + Becrosi valve spring wire + Silver and Palladium wire

For over 20 years, Meko un Ko has been delivering comprehensive, high-quality metalworking services. Our skilled team and modern equipment ensure precise execution of projects across various industries. We emphasize quality, reliability, and tailored solutions to meet each customers unique requirements. Company is founded in 2002, Meko un Ko started with entrance door code and access systems. Over time, we expanded to broad metalworking services, acquiring advanced equipment and certifications. Our growth reflects a commitment to innovation and customer satisfaction.

Our core competencies are: Tools - Hard Metal Processing - Sheet metal rounds - Punching / pressing (tool Falling) - Punching-bending (Bihler machine) - Stamping - Injection molding, extruding - injection molding - Encapsulation of inserts - To water - Die-casting - Ingot - Machine molding (sand casting) Translation by Google Translate

Private company, with young team, offering wide range of services providing construction and assembly works of steel products including final surface treatments based on Customer drawings.

metal cutting technology, Steel, stainless-, brass turning, milling, grinding, inductive hardening, assembling

We are a medium-sized company based in Ganderkesee and have been producing sophisticated sheet metal and formed parts for our customers for over 65 years. Our customer base includes the automotive, mechanical engineering, electrical, marine and aircraft industries, where we are listed as an A-supplier and have already received several awards as a 0-ppm supplier. Our company is fundamentally different from other companies that can produce either only large or only small series at low cost. We are proficient in both technologies. Since we are convinced that only holistic quality and sustainability can lead to success today and in the future, we have a certified integrated management system in accordance with the requirements of IATF 16949, DIN EN ISO 9001 and DIN EN ISO 14001 established. (ext. TÜV Cert link). Our homepage is intended to give you a brief overview of our diverse production options. We would be delighted to work for you too. Give us a chance to do that.

SYS Pres company is metal fabrication company which spealizes in laser cutting, laser welding, welding, bending, and surface treatment operations. Surface treatments are automatic sand blasting, zinc plate, copper plate and etc. SYS Pres company's facility is 3000 sq. Our export countries are Austria, Germany, England, Netherlands, Belgium, Israel.

Cutting and non-cutting machining (sawing-milling-drilling-turning-tapping ...) of aluminum profiles on rotary indexing and CNC processing machines, up to 5 axes and partly with robot support