BAUMANN GmbH Germany was founded in 1964 in Lichtenstein. The company operates at global level in the field of development, production and sales of springs, pressings and special products. Extensive automation of the production processes guarantees an optimum price-performance ratio. Our customer segments range from the automotive industry through electrical and medical technology, mechanical engineering and engine building to manufacturers of household appliances. In our Lichtenstein works, we currently employ over 200 qualified personnel in development, production and sales. Motivated and systematically trained, our employees have state-of-the-art technologies and processes at their disposal.

Production of assembly jigs and fixtures / Production of tipper semi-trailer / Production of Automotive component parts and doors / Production of Construction equipments

Manufacturer of timber connecters. We hava a 1.250 mm cutting line, stamping machines and a tool department.

The chub electric heat GmbH is your competent partner for development, production and sales of electrical heating elements made of copper and stainless steel various designs for energy conversion and solar technology. As a service provider for electrical heat generation, we are an established and reliable partner for your technical applications. Our product engineers will be fully responsible, creative and solution-oriented. Our in-house tool enables us to quickly and flexibly to your wishes. The production is continuously adapted to the new challenges to an efficient process design. The staff are highly motivated and well trained. Thus we are able to meet the ever increasing market requirements and to realize the customers their specific solutions on time and to quality standards. In addition to active consulting activities of our own sales department you are knowledgeable and powerful distribution partners throughout Europe, andalia in Poland, Austria, the Netherlands and Hungary, are available. Take us at our word! Give us a try! Our Products: Liquid heating: round tube radiators of copper (hot water tank, auxiliary heaters for boilers, boiling water heaters, water heater), round tubular heating element (flange heater, heater for steam generators and temperature control, immersion heaters, Indirect heating of stainless steel containers), flat tube radiator, ceramic column radiators) Air warming: fin tube heaters, heater Tool heating: round tube radiators cast in aluminum, cast iron or bronze alloy, surface Heaters for vacuum coating systems, high-performance cartridges to tool cartridge heaters, Mikanitheizungen, ring heaters Radiation heating quartz tube heater, infrared heaters Special barbecue or fireplaces,

Stainless steel processing and distribution - manufacture of innovative stainless steel products Our company was founded in 1987. Our customers are wholesalers, retailers, companies and individuals. We manufacture everything in the field of stainless steel, aluminum small-to items, railings, balustrades, handrails, kitchen equipment according to your individual requirements. Also repairs to aluminum castings are not foreign to us. As stainless steel designer we bring you our ideas and experiences with. We cut from 0.5 to 6mm sheets, up to 3 meters in length. In addition, we are the contacts for edges, punching, round, sawing and welding of stainless steel, aluminum and copper. Our staff, with years of experience, ensure a smooth Production process. Quality is important to us GREAT. Construction Processes Mailboxes Building trim / interior Railing Furniture Signs / letters / numbers Street furniture Staircase accessories / Railings Accessories Installation / equipment Plant Filter Flanges Pipe penetrations Pipe connector Pipe accessories Ring Environmental protection, water protection Drip pans Sanitation, bathing, Sport Spa facilities / sports facilities Water games Gastronomy, food, household Hoods Kitchen equipment Metzgereibedarf gutters Wine storage tanks Miscellaneous Advertising Technology An-

The company Purkert metal & form GmbH was established in 1955 in Enns - founded in Upper Austria and has developed into an innovative, medium-sized companies. In 2002, the company has a new location in Asten - related Upper Austria. For global customers in the automotive and electronics industries use our potential for innovation, reliability, quality and cost consciousness. A motivated team of employees wearing and developed our core competencies: the decades of know-how of an own tool construction the manufacture of precision metal stamping, punching bending and forming parts and building upon components and assemblies and the production of special cases

Medium to large series of complicated sheet metal parts in the area and subsequent welding to sophisticated assemblies. Not in the house of existing technologies such as surface treatments are handled by our company with strong business partners for our customers.

For more than 30 years we have been the supplier of CONTINENTAL, BOSCH, Schaeffler LUK, FTE. The Rossignol group (divided in 2 plants, 1 in France and 1 in Czech Republic, 75 employees) is specialized in the security parts of the automotive industry for the brake systems. We deliver 30 million parts per year (piston rods, plungers, assembly piston rod-clevis, screw parts, 2 spheres pistons, ventilkolben…), thus for the all worldwide automotive makers (FORD, BMW, VW, VOLVO, OPEL, RENAULT, PSA, DAIMLER DC, MAZDA, FIAT, FERRARI …). I invite you to look at the attached files and at our web site for the machining production part (www.rossignol-pierre.com) and at the web site www.galvanik.cz for the surface treatment and logistics part. We are making the clevis on our in-house press machines; we are machining all the parts between diameter 4 to 38mm (CNC, 67 single spindle machines and one area of 15 multispindles). We are also ensuring the welding assembly or riveting (15 machines for pressure riveting), producing forged steel parts, and making a 100% control of all our parts (visual and inspection machine). Our parts are treated internally in our surface treatment plant (new high performance electrogalvanizing since 2007) and we also have a logistic warehouse of 3200m2). We are independent and can guarantee the control and the quality our products, in addition, since 1999 we have been ISO TS certified. Please also be aware that we are exporting to various plants located in the United States, Brazil, Mexico, Turkey, Poland, China, Taiwan, Italy, Spain and France.

Metallwarenfabrikation since 1897 Focus of our work was and is the production of metal goods. In the initial phase of customers in the beekeeping and its time yet in this country based screen industry were supplied with fittings. With the experience and skills gained is more industries could be gained added over time. Today, a number of medium-sized clients from various industries form a solid basis for our company. As diverse as the needs of our customers ... To meet the demands of our customers and not least because of our self, we offer a well-rounded range of services. Stampings and bent parts up to 100 tons press force - our own tool We are manufacturer of stamping parts, bending parts and formed from all common metals. Our services range from the design and construction of the necessary tools, the actual production on eccentric with an optional surface treatment on request to the final, salable packaging!

We are a more than 60 years old company, specialised in stamped rubber production. We start with a thickness of 0,3 mm material using all special types of sheets even in Silicon and Viton. Tools are made by ourself. We also produce seals slotted and grooved- rings with desired tolerances in the same qualitys. An absolutely adapted team manufactures and controls permanently all products. Through automation we were able to improve our capacy by rising up our quality level. For this we got a cost-structure which fulfils the market demands.

We are continuing a long tradition in the development and manufacture of tools in Gornja Radgona. Initially focused on the design and manufacture of tools for sheet metal forming, has been expanded over the years, the process chain with series production. Today, more than 75 employees produce tools and production parts for the automotive industry. Over 95% of sales are realized with companies in the European automotive industry. Our products are installed in the cars from leading manufacturers, such as Audi, BMW, Mercedes-Benz, Volvo, Ford, Volkswagen. The quality in the development, production and sale of dies and standard parts, is secured in accordance with the standards ISO / TS 16949 and ISO 9001. Our employees, our know-how and our long experience, are always at your disposal. It would be very pleased if you would turn in your projects to us.

Manufacturer and service partner for precision stamping parts. Progressive tooling and secondary operations such as riveting, welding, threading. Surface treatments with partner suppliers possible.

The wishes of our customers Complying with their requests with realistic possibilities Feasibility and tests, sample parts, offers Quality of monitored processes We meet by Ideas and know-how Fast Terminabstimung, pattern production and Deals Qualified employees, process control, on time delivery

The Otto Bauckhage GmbH + Co. KG is a medium-sized company mainly active in the field of stamping and forming. Our domestic and foreign clients belongs primarily to the automotive and electronics industries, as well as the bolt and nut industry. The company was founded in 1960 by Mr. Otto Bauckhage and still is in its way a traditional family. Up to 31.12.2002 Hans Werner Bauckhage stood before the company as Managing Director. 01/01/2003 Mr. Dietmar Schoettler and Heike Schäfer have occurred as a shareholder in the company and has been appointed as managing directors. The medium-sized company structure with about 35 staff gives our company to produce the necessary flexibility, small quantities and large production runs efficiently and therefore ensures a fast and reliable order processing. Our quality management system complies with the standard of the automotive industry according to ISO TS 16949:2002 and EN ISO 9001:2000 and is certified accordingly.

Something ... about us: We are a modern and innovative company in the micro-stamping technology sector. Together with our customers we develop micro-stamping parts. We design and manufacture the necessary precision stamping tools and use it to produce high-precision micro stamping parts with smallest dimensions according to your requirements. In our understanding, precision is the necessary condition for quality and function and thus the basis for customer satisfaction.

Welcome to the RUNAWERK, your contact for sheet metal processing, front panel, keyboard slides and small equipment manufacturing. Our highly trained employees serve renowned customers in the electronics and engineering industries as well as medical, communications, measurement and control technology. RUNAWERK is also certified and officially approved supplier for leading large companies in the aviation industry. Our portfolio at a glance: - Faceplates - Membrane Switches - Sheet Metal Fabrication - Industrial Coatings - Repro & Screen Printing - Laser & industrial engraving - Rubber plates & stamps - Nameplates & Labels - Development & Design Our key competitive advantage is to say: Leading by quality. We understand the "zero-defect goal." We are convinced that we are always with high quality work processes able to achieve predictable, stable and controllable results. Our manufacturing processes are designed so that we avoid from the outset errors and thus produce lasting reliable products with high quality. For us, quality means "compliance with the requirements of the customers." "Quality is when the customer comes back and not the goods!"

The company masters the most demanding welding technologies. We are a family business founded in 2017. Our key business objectives are excellence in the projects we work on and hiring highly skilled people to achieve excellence. Services: production and welding of metal products, Assembling various metal constructions maintenance work on the facilities, electrical installations.

The LPSsrl is operating for more than 34 years on the national and international markets, it is specialized in perforated sheet metals, expanded metals, metallic mesh, embossed metals, filter elements. The products of L.P.S. solve problems of filtration, separation, protection, soundproofing, decoration and design, washing and drying. We are introducing new product lines for furnishings and design. The sheets are obtained by punching cold. The materials used are: mild steel, stainless steels and other special steels, aluminum alloys, brass, copper, zinc, plastic, ptfe teflon, etc.. L.P.S. operating since 1979 in various industrial sectors, has specialized in drilling as well as standard even in dense passages with close, small and very small holes (minimum diameter mm.0,3), perforations drawing upon customer request. We are able to produce little quantities to mass production. In addition to these metallurgical products, due to its structural division, LPS is able to carry out additional processes such as folds, notches, calendering, welding, etc.. At the headquarters of MONZA (Via Buonarroti 177 Italy) customers can find the largest selection of product in stock: perforated plates (iron, stainless steel inox aisi 304 – galvanized steel-aluminum),textured sheets, expanded metal, woven wire mesh, wire mesh, welded wire mesh, etc..

Many years of experience and recognized competence in the market for heat generator products are the essential characteristics of INTERDOMO GmbH. An important element of this recognition is based on our know-how in the stamping and forming technology of welding and final assembly of the product. We expect to be able to meet the high demands of the market in terms of quality, technical implementation and delivery service and absolutely excellent. In the absolute knowledge of our strengths, we have defined our business purpose as follows: Development, production and sale of components, assemblies and systems that are generated by the technologies punching metal forming, welding and assembly.