Immediate help and external support for the plastics industry — directly from injection molding experts. Targeted and rapid help with technical problems in injection molding, component developments and effective marketing for small and medium-sized companies made of plastics and elastomers: DUROPLAST + THERMOPLAST complete service Advice, support and training in theory and practice Production support and production set-up Design, thermal analysis Samples in our own technical center, process optimization, problem solving Plastics engineering and development partners Material characterization in our own laboratory Preparation of extended technical data sheets and simulation maps simulations (mold flow, temperature control, FEA) and feasibility studies specific marketing for technical services and products — targeted, predictable, effective increasing findability + precise search engine optimization (SEO), Ranked better with existing websites Improving company image (corporate CI, graphic styles/ design) Preparation of sales material (presentations, flyers, print data) Help with new customer acquisition (lead generation, performance marketing) new websites/LinkedIn help/activate sales channels Process and product photography specifically for the plastics industry Marketing support from A to Z, project-based and permanent support possible. Schwarz Plastic Solutions is a team of three specialists with many years of experience, each with a different focus on specific topics that often cause difficulties in our industry. Two of our experts are active as external technical support and problem solvers for thermosets and technical thermoplastics. This combines decades of experience in injection molding production and scientific work. With our own modern injection molding technology center and laboratory, we are available to OEMs, TIEs, material manufacturers and plastics processors alike as partners and “external team expansion” with very specific knowledge. typical topics with which we provide technical assistance: Establishment of an injection molding production/Transition of prototypes to series production Introduction of a new technology Material development/component development Training of manufacturing specialists (training — coaching — training) Process or component quality problems in injection molding (duroplast/ technical thermoplastics) Our third team member helps with commercial issues with a broad portfolio of technical marketing support and highly targeted actions. Marketing does not work without expertise in processes/technologies/applications and, on the other hand, knowledge of target groups and their interests or problems. This is exactly where we come in and offer a mix that presents complex technical topics in an appealing way and addresses your target group in the right way. typical topics that we help with in marketing: if the public image or presence in the market has been neglected or does not work if the website does not bring the desired success/ visits/ contacts When there is no internal marketing of our own and external agencies from outside the industry just cost a lot of money and do nothing When there are too few new customer inquiries Despite a strong focus on reactive polymers and a specific portfolio of services, thanks to a long-standing network within industry, we can also provide support on topics that at first glance do not fall within our core area. Talk to us about this and we'll find a solution.

Blue Technology – manufacturer of measuring devices and supplier for Injection Moulding, Turning and Milling

We are Slovenian engineering company in the field of mechanical engineering.We are present in various sectors of the industry across Europe (Austria, Germany, Switzerland and Netherland) Our advantage is that you as our customer have only one business partner who covers the entire EX-YU market for products. We also guarantee our clients a timely delivery and the quality. of your orders.

Imateg93 Srl is a rubber moulding Company established in 1993 in Robassomero, in the Province of Torino, Northern Italy. We strive for constant quality improvement, to always deliver the best products to our Customers. We constantly develop leading-edge technologies, driven by a spirit of continuous innovation. We have solid, stable finances, supporting robust R&D and sustainable growth. We manufacture technical rubber products for all industries, from Automotive to Household Appliances for hundreds of satisfied Customers Worldwide.

Angelo Barbieri came from a competitor in 1963. He started with one machine and developed the company to grow up. His son Alberto Barbieri started his business in the company in 1999 and now he is the manager in charge of BARBIERI RUBBER The company has a gradual and steady growth over the years and developed a remarkable experience in the rubber molding. Thanks to a highly qualified technical office is capable of supporting the customer throughout all the production process of a new rubber part, from feasibility analysis, choice of material, prototyping up to series production. Barbieri Rubber has a catalog of its standard products and specializes in rubber bellows, developing the patent: The modular bellows, an affordable and ready for delivery bellows that immediately achieved great success worldwide. The company is developed in 3000 square meters , 35 compression and injection machines from 35 up to 800 Tons, a Technical Department, a Quality Department and a large warehouse.

The Scho Plast Plastic GmbH in Bischofswerda (Saxony) is a medium-sized company which specializes in the thermoset molding process in injection molding, and thermoplastic processing in injection molding. Our core competencies include the spraying of high-precision components for the switching stations and control systems, the encapsulation of inserts as well as the production of plastic parts in the visual range (surface parts). All forms of plastic finishing (deburring, blasting, drums, loops, ionizing, printing, pad printing, conditioning, annealing, networking) also belong to the range such as the assembly of components into finished goods. As a competent and holistic complete support partner, we are at your disposal from the product idea to tool up to series production of the parts including the "just-in-time" delivery to the side. Detailed information is available on our website www.schoplast.de

Construction & Design reconsider - new ways and possibilities with 3D printing / additive manufacturing process various processes and tools are needed to reach the goal | I want to help you

As a family-managed company, we offer you the complete service from the initial idea through to series. We are so small that we can react extremely flexibly, but can also perform large enough complex assemblies including assembly and logistics. Together with our development partner, we can provide you cheap tools from China, but also offer Hi Tech tools from Germany and Europe. Anterior us We will find a solution

We have been a sought-after contact for more than 25 years when it comes to high-quality elastomer products. Our core competence is solutions for special cases: the more complicated the product and the more demanding the use, the better. The spectrum ranges from the development and manufacture of individual prototypes through the series production of high-quality molded parts to complete components. In our modern and technological society, rubber and other elastomers are indispensable. Elastic seals, buffers, profiles etc. are used everywhere and sometimes have to meet the highest requirements. Areas of application can be found in many different industries. We currently have a product range with over 2,500 articles, including high-quality solutions according to DIN / EN ISO 13485 for the medical sector.

- Work out / development / planing construction - Moulding process - Injection moulding, muliti component parts - Mechanic working of plastics - Compression moulding - Additional treatment / finishing - Installation / machine assembling - Quality control / saving - Service for our customers

Through exclusive specialisation in products made of flexible materials such as rubbers and TPEs, Hoogerdijk wants to be your most economical out-sourcing partner for engineering, sourcing and logistics . We systematically focus on improving production facilities, materials and their applications. For the industry, Hoogerdijk is a knowledge partner who can initiate and assess product design and lay down material specifications and production criteria. Hoogerdijk also takes care of production, with reproducible quality and costs as the most important parameters. From customer concepts to total solutions: we monitor the entire process from design through production upto and including delivery. Our flexible working process recognises strengths and weaknesses and brings production into line with the changing needs of our customers. We export more than 20% of our products. We increasingly focus on international market developments and cooperation in the field of production and logistics. Here as well, Hoogerdijk aims to be your specialised co-partner of choice. Products made of flexible materials such as rubbers and TPEs; such as: seals, punched gaskets, extruded profiles, moulded parts, protective bellows, impact protections, vibration isolators, buffers, silencers, formed hoses etc.

IPPM is a company specialized in the production of plastic injection moulds, founded in 2002. The company has been manufacturing moulds for the automotive, medical, pharmaceutical, electronics, household and packaging industries. With a large accumulated experience in mind, the company offers customers the credibility needed to make moulds for the general industry and in particular for cars, especially optics, consoles, wires, guides, buttons and other elements inherent to the modelling of plastic parts, as well as bi-component parts. IPPM performs Thin Thickness, Unscrewing, 2 and 3 component Moulds, Multi-Cavity, for Rubber, for Semi-solid metal casting and for Plastic Injection in general. We also provide Grinding, Technical Mould Adjustment, Assembly and Tuning, Repair and Maintenance, Parts and Electrodes Machining, Parts Erosion, 3D Modelling, 2D Programming and Drawing.

- drilling, milling, and cutting, particularly projects - plastic Injection molding from 15 to 650 t , 3k - assembly, packing and shipping

Manufacturer of plastic pipes and fittings used for - - Water supply and waste water drainage - Industrial applications

Nedimpex Mij BV is supplier of constructive parts. We supply different kind of turning & milling parts, welding & construction parts, sheet metal cutting & bending parts, castings incl. several. surface treatments. We combine our knowledge and experience with a wide range of technological production possibilities. We deliver high-quality products at a low cost price and short delivery times. We work together with Nedimpex Products BV for the assembly of components and semi-finished products.

As a family-run company in the third generation, we have had more than 65 employees at our location in Blaufelden since our foundation in 1949. We are proud of our past and motivated to continue to work for our customers as specialists in the production of injection molded parts as well as in tool and mold making.

RONERA Rubber SA was founded in 1997 and has grown steadily to become a major regional player in the production of rubber articles, technical plastic articles and rubber compounds. Our customers are mainly from the automotive field, but increasingly from other industries such as power tools, rolling stock components, agricultural machinery and others. Over the years, RONERA Rubber SA has become a company of major interest among the companies producing technical rubber and plastic articles in Europe, by the way it respects its business partners, by the quality of services, the promptness of delivery and the permanent increase in turnover.

Since 1942, when Gummi-Jäger, the parent company of Jäger Gummi und Kunststoff GmbH, was founded, application-oriented advisory service, material-oriented construction and system related development are the key for the Jäger Group’s success. Our competence and efficiency continuously raised according to the customers’ demands. Our success is based on continuous product innovation, advice independent from the material as well as a friendly, competent service and zero-defect philosophy. The family business in its third generation operates worldwide and is a qualified partner in the field of machine and plant engineering, agricultural industry, environmental and as well as in oil exploration. Over 800 employees are working towards this goal in more than 20 sites in Europe, the USA and China.