Lasers A laser penetrates contact sheets, tubes and profiles. At the point where the focused beam impinges upon the workpiece, the metal begins to melt away. This results in a narrower kerf, barely wider than the beam itself We use the laser beam fusion cutting as a separation method for stainless steel, aluminum, brass, bronze and titanium. The combination of our 4000-watt laser system from Trumpf with the Fladder-deburring providing its customers a number of special advantages: We can produce almost any shape. The material heats up hardly and does not warp. The cutting edges are straight, free of burrs and clean. The components can be processed immediately. Bending Bent parts can be found in technical applications in ever-increasing numbers. They enable materials, weight and cost savings. However, precisely bent sheet metal parts require extensive knowledge of materials, precise work preparation and true machine powerhouses. We work with a Trumpf press brake with 6-axis stop, automatic angle measurement system and 230 tons of pressure. In our work, preparing the optimum bend sequence is determined to create its processing using 3-D software. In addition to the geometry of the bending portion, the empirically determined characteristics of the material are considered. This can be programmed and produced within a very short time even complicated bent parts. Welding Stainless materials are now available in great variety. Exact knowledge of their behavior during welding are therefore a fundamental prerequisite for the quality-oriented performing welding operations. And: Stainless materials do not come around a corresponding weld-treatment if they are to remain rust-free. As specialists in stainless materials, we offer our clients professional solutions around the welding and finishing of steel and aluminum. We perform the welding process TIG, MAG and MIG and spot welding and stud welding. As a post-treatment process, we have preferably pickling and passivation, but also sanding or bead blasting. Edit Machine parts, panels, framing, or container - in addition to welded joints play mechanical joining techniques an essential role in the structural design of composite systems. The additional mechanical processing of sheet metal, pipes and profiles fits into our production flow seamlessly. We manufacture holes, eyelets, threads and cuts and can offer our customers the manufacture of turned and milled parts made of rustproof materials as well as the riveting, bonding, welding or bolts injection of standard parts. Surface As specialists in stainless steel and aluminum we are very familiar with the decorative design of the product surfaces.We advise you gladly. Because the right surface treatment affects not only the appearance of the products. Also, the strength and the cleaning behavior are influenced by it. Depending on the application or customer preference, the method of glass bead blasting, grinding, polishing, electro polishing, chromating, anodizing and powder coating available. Labels can be designed as a laser marking, engraving or the screen printing method.

GMR Endüstri Teknik is a foreign trade company, which is supplying custom made drawing parts and industrial products from Turkish Industry according to variable customer demands. GMR located in Bursa, Turkey where is the heart of Turkish manufacturing industry. We are focused especially on custom made parts for European automotive manufacturers and their suppliers. We are supplying precision turned&milled parts, cold&hot forged parts, special connecting elements, sheet-metal parts, laser&stamped parts, welded components, aluminium injected parts and cast-iron parts for automotive and various industries. The range of products that can be supplied by GMR with ease of access to powerful factories located in the surrounding provinces are quite large. Apart from semi-finished and finished products, various raw materials like aluminium sheets and profiles, cold&hot rolled pipes, acrylic sheets, aluminium foils, special packaging goods and all kind of industrial demands can also be supplied by GMR with required certificates and test reports.

All from a single source ! Biegetechnik Überwald GmbH was founded in 1996 and has been steadily promoted with specialist expertise, experience and innovation under family management. Since our foundation, we have developed into a specialist for pipe and profile bent parts with the complete further processing on approx. 2000 sqm. In addition, the production area for sheet metal parts was added 6 years ago. The development of our own products, as well as the individual production and implementation of customer requests, supported by CAD designs, round off our offer. Our own tool shop enables us to respond precisely to customer requests and of course a fast delivery time. For our customers, including many well-known manufacturers from all industries, we are primarily known as a problem solver that is oriented to the needs of the customer. Our clients also appreciate the favorable cost structure. Our sister company AM Dichtungstechnik GmbH is located in the same building and takes over all powder coating work. This is not only beneficial for you as a customer, but also benefits the environment. True to the motto: "Everything from a single source!"

TECHSO GmbH is a young, up-and-coming company in the metal sector. Our name “TECHSO” stands for Technical Solutions and that is exactly what we stand for. We not only cover all standard metalworking manufacturing processes, but as a specialist welding company, we also have many important qualifications. We also cover all industrial maintenance and welding repair work. With over 30 years of independent professional experience, competent, trained and committed employees, an extensive range of machinery and a large circle of partner companies, we are able to meet almost every customer request.

SoveK Ltd welcomes you to its Website. We hope that you will be interested in the products and services of our company. The high quality of the product is the main thesis in the work of our enterprise, the origins of which as a manufacturer of auto electronics go back to the good Soviet eighties. Paying great attention to quality, we do not forget about the price. Working directly with leading domestic and foreign manufacturers of components allows us to offer consumers, in addition to quality, the most reasonable prices. The company SoveK Ltd has been represented on the Ukrainian, Russian and Belarusian markets since 2000. For more than 20 years of our history, we have managed to occupy a strong position in the automotive electronics market, gain the authority and trust of numerous clients, including both private consumers and corporate users. Since 2007 we have been the only supplier of electronic switches 94.3734, 941.3734, 262.3734, electronic breaker PE-1 - JSC "MOTOVELO", one of the largest motorcycle manufacturers in the territory of the former USSR. We produce a wide range of electronics products for cars produced by AvtoZAZ, AZLK, VAZ, GAZ, UAZ, ZIL, MAZ, KAMAZ, agricultural and motor vehicles. Recently, the enterprise has mastered the production of a number of products for national economic purposes. Having our own high-tech equipment and qualified personnel with experience in development and production allows us to achieve the required quality and reliability of products, to quickly master new products and modernize existing ones. The company also provides services for turning, milling, welding, injection molding, laser metal cutting, stamping, assembly of electronic products, etc. Our experts will help you in choosing products and services, provide information support and create all conditions for fruitful and mutually beneficial cooperation.

Cold deformation of tubes & profiles including their processing Tube and profile bending / rolling

We are a reliable partner and a young, powerful company, with experienced professionals and a modern workshop equipment for welding, steel construction and special designs. Our master craftsmen allowed to present himself for the almost entire range of metal processing in steel construction and locksmith craft. It has always been our endeavor to maintain a good connection to our customers maintain or extend. We have a long experience in the field of industrial assembly and welding of all kinds Custom made stainless steel and aluminum applications complete the product range. We manufacture to your specifications, drawings as well as our own designs. A good price / performance ratio, the observance of deadlines and technical requirements are a matter of course for us. Furthermore, we offer a high degree of flexibility. Give us your trust and we will do our best.

KSM-bending technology is active in the field of technology and bending deformation demanding sections of steel, stainless steel and aluminum or other nonferrous metals since 1991. Modern bending machines and well-trained staff with many years of experience in the field of bending technology guarantee the highest quality, timely delivery and reasonable prices.

The Knupfer Metal Processing GmbH is a sheet-processing supplier for the machinery and special machinery for air conditioning, ventilation and suction technology, clean room technology and the automotive industry and has worked for over 50 years. We manufacture sheet metal parts, machine covers, protective covers, enclosures, machine bases, machine body and complete assemblies from lot size 1 steel, stainless steel and aluminum. Our high-tech production in-house include: Laser Cutting (Automated high-bay warehouse) The following material can be cut: steel up to 25.0 mm, stainless steel up to 20.0 mm (oxide-free), aluminum up to 12.0 mm material thickness. The max. Machining size is 3000 mm x 1500 mm. All three stocking systems are connected to an automatic high bay warehouse with 220 storage bins (3 tonnes storage capacity). We are thus able to cut during the night shift without staff. Water jet cutting 5-axis machining of steel up to approx80 mm, stainless steel up to 80 mm, aluminum up to 100 mm - other materials such foam, plexiglass, plastics, glass, stone, sealing material, composite materials, wood, etc. possible. The max. Machining size is 3600 mm x 2000 mm Bending Pressing force of the CNC press brakes: 1 x 320t, 200t x 1, 1 x 36t ACB angle sensor available, 3-point bending is included as standard, Folding Machine in use Nibbling and punching Steel up to 6.0 mm, stainless steel up to 4.0 mm, aluminum up to 6.0 mm The installation of ventilation gills, beading, perforated grids, rows etc. is easily possible Welding (Manually or with robots) MIG / MAG and TIG, spot and stud welding (threaded bolts and sleeves), welding robot with rotating and tilting table for components up to 5000kg unit weight. These saws, laps, mech. Machining (milling, turning, drilling, threading), production of flange rings according to DIN 24154 and angle rings to DIN 24155, as well as special rings and segments and paint the assembly and completion according to the surface treatment (powder coating, galvanizing...).

Since 1992 our company has been dealing with the cold bending of hollow sections. All started in the first half of the ‘90s when we intended to produce bent-metal furniture. After having mastered the bending technology of ordinary tubes made of constructional materials, we proceeded to a more demanding technology of the bending of thin-walled tubes having the bending radii under 2D of the tube diameter. Using special tools, such as ball mandrels and smoothing devices, we are able to achieve high quality of a bending both from the visual point of view and in maintaining a minimum tube diameter deformation. We obtain similar results not only with materials made of construction steel, but also with materials made of anti-corrosive steels and aluminium alloys. We also get good results with the bending of square and rectangular sections. The main part of our production program consists in products manufactured in cooperation. These are components of shop equipment, protective frames of cross-country cars, series of various bent holders, frames, reinforcements of agricultural machines and injection piping. Other supplementary technologies are grinding of tubes under chrome, tube and section twisting, horizontal forging, MIG and TIG welding. At present we have been looking for partners to be able to use the full capacity of our bending machines.

Kersten Europe has been around for dozens of years, the specialist for bending technology. At our production sites in the Netherlands, Germany and Poland, we turn profiles and sheets of steel, stainless steel and aluminum. Our team of skilled staff works with the latest generations of bending machines and robots and advanced processing techniques. We transform creativity into reality. The bending represents only one part of our overall approach dar. Our engineers work with you to innovative solutions and project execution we turn again and again to new techniques. Kersten Europe moved constantly pushing the envelope. We look forward to challenges and offer complete project management. In addition to the bending of profiles and sheets belong to, among others: engineering, prototyping, performing additional edits to the bent products, logistics and transportation. Our knowledge and expertise were already reflected in a variety of outstanding architectural and industrial structures around the world.

The company Hüttinger & Harmful GmbH was founded in 1992. Initially, our services to the maintenance and repair of industrial equipment and machinery related. Gradually expressed by our customers desire expensive original parts inexpensive to manufacture, supply and install. Today we already manufacture complete equipment, containers and machinery, to the planning, calculation and construction. But even single-u. Series production as a supplier for the engineering and produzierenten industry in general. The second division includes the installation of heating u. Ventilation systems, plumbing and piping in its great variety of embodiments.

Our long-standing and traditional family is a powerful partner for high-quality metalwork. Materials: Are processed steels, stainless steels and non-ferrous metals copper, brass and aluminum Range of services: Metallic, steel, ironwork and restoration work, stainless steel processing, Welding We manufacture for you: Steel stairs, balconies, platforms, platforms, frames, racks, railings, steel ladders, machine stands, covers, grilles, fencing and gates for private and commercial sector, steel pallets, Rammschutze, bollards, trellis, tree guards, console, trusses, supports, welded structures, ring bending of profiles, custom-made according to customer Surface coating: On request, the manufactured components against corrosion protected, but different methods are possible, for example, color coating, powder coating or galvanizing Steel, stainless steel, nonferrous metal, restoration, welding, welding

Founded in 1966 by Erich Schötz, father of the current managing director Markus Schötz, the Erich Schötz GmbH is a modern, powerful, medium-sized companies in the metalworking industry. Since 1997, Erich Schötz GmbH has specialized in the fields of promotion to Store systems and displays and has grown to become one of the leading display manufacturers due to their multi-faceted production depth. Since the formation of Erich Schötz GmbH stands for us the desire of the customer is always in the foreground. This means for you: - Customer-conscious care by a friendly and motivated team - Individual and future-oriented work in every project - Cooperative partnership between you and Erich Schötz GmbH - Controlled production of your project to packaging and logistics Here is an overview of machining options: Development / construction Laser Technology CNC - Punching technology CNC - Forming Welding Powder coating technology Screen printing Assembly of mechanical and electrical components CNC - milling of plastics and wood materials Thermal deformation of plastics Service - Logistics - CNC laser dance technique steel up to 8 mm, stainless steel / aluminum up to 4 mm thickness - CNC Bending up to 3000 mm length / rolling technology up to 1500 mm length - Welding in GMAW and GTAW process - Powder coating technology max. Size H

We are a medium-sized company with 38 employees. We are located in Stadtlohn, in the scenic Westmuensterland (only 10 miles from the Dutch border). For 29 years we manufacture machines for rationalizing and modernizing every kind of industry. To give you a small view of our production program, we have programmed these Internetpages for your convenience. Due to the wide range of our production program we are only able to show you a few examples of all machines we have produced.

Sheet and Tube Processing Special in all metals

ÖZ-İŞ Oto Yan Sanayii has been operating in the field of Automotive Sub-Industry since 1969 in its facilities in Düzce. Our company, which serves the automotive sector, uses the most common production methods of the age in order to minimize the number of faulty products by using quality control techniques at every stage of our production and to deliver on time by reducing our costs. Our company, which has a large machine park, meets customer demands in the best way with Cad-Cam and R&D studies.

we started to production and spent time to understanding'' precision'' and it was our exit point and enter point the issue and We made our disicion and built to company benk metal today our comnpany well knows company as precision part producer in domestic market and international market we have been giving service to medical equipment ,defence earospace,automotive,power system ,...... As a company, we always follow the latest technology and re-establish our company according to these developments benk metal a family based company at Turkey in Kayseri city our closed area 2000 m2 20 cnc machines 30 qualified person we already give service our customers i

Our company operates in the following areas of production. Wage work for bending profiles of round and square tube, angle, U, T, I-steel, flat round, square steel and special profiles to customer specifications. Production of round-segment circular and elliptical arcs, also coiled in three dimensions. Milling and drilling with CNC milling technology with single-piece weights of about 300kg. Wage labor in the machine and steel constructions. Manufacturing of welded constructions of steel, stainless steel and aluminum according to manufacturer qualification according to DIN18800-7 Class D structural steel fabrication and installation of general support structures, stairways, balconies, canopies, railings, platforms, covers. Metal Manufacture and installation of steel and glass tube frame elements such as door systems, window fixed glazing and facades with approval for fire and smoke protection T30-RS, T90 RS F30 RS, F90-RS, G30, running G90, as well as thermal insulation.