The Dr. Dietrich Müller GmbH, based in Ahlhorn (Lower Saxony), has long proven itself as a successful service provider for the manufacturing industry. The focus is on the development and implementation of customized solutions for the manufacturing processes of the respective partners. The Dr. Dietrich Müller GmbH is one of the world's largest suppliers of electrical insulation materials, seals and heat conducting products. The company is certified for quality management according to ISO 9001 and listed as a recognized repackager by UL. This means that all UL-approved materials retain their approval. Solutions for motors and generators We develop, manufacture and supply flexible and rigid electrical insulating materials for motors and generators using materials from leading manufacturers worldwide. All insulation parts can be supplied by us. Solutions for air and oil cooled transformers The insulation system is crucial for the service life and functionality of oil transformers and dry-type transformers.We deliver ready-to-install individual parts and kits. Solutions for electronic products In addition to electrical insulating materials for electrical insulation, we develop, manufacture and supply products and systems for cooling electronics, particularly in the fields of medical technology and aerospace. Solutions for mechanical engineering and vehicle construction Composite materials are becoming increasingly widespread in mechanical engineering and vehicle construction. We support in the development and manufacture of ready-to-install parts and systems. Solutions for batteries and accumulators We supply insulating films, battery separator films and thermally conductive materials. Support for research, development and universities With the multitude of manufacturing processes and available materials, we are the right partner for solving your challenge. We process ul-approved materials from leading manufacturers.

Kummer GmbH is your reliable development and production partner for all aspects of stamping technology. As a specialist in tool engineering, stamping technology, plastic hybrid technology and assembly technology, we offer customized solutions – from the initial idea to series production. We manufacture high-precision stamping tools, stamped parts, injection-molded parts and complex assemblies for a wide range of industries. A particular highlight is our solution for PCB press-fit technology – the EloPin. In plastic hybrid technology, we rely on a reel-to-reel process developed in-house, enabling the production of insert parts through innovative progressive injection molding. Here, we are a technology leader, delivering economical and highly automated production processes. Our quality is certified according to IATF 16949, ISO 9001, ISO 14001 and ISO 50001 – ensuring maximum process reliability and sustainability throughout the entire value chain. Kummer GmbH – Precision, innovation and partnership in stamping technology

About us With our industry expertise, we can help you successfully and promptly implement your production project for mechanical components, assemblies, and housings for small to medium-sized series. For more than 20 years, we have been experts in die casting, injection molding, and other mechanical processes. Our focus is on cross-process thinking. In Germany, Europe and Asia (in-house certified production) we manufacture your mechanical components, assemblies or housings. Our manufacturing services include: Engineering: Technology consulting (wide range of materials and manufacturing processes); CAD evaluation, construction & development Prototyping (close to series production; 1,-3,000 pieces) for die casting, injection molding, precision casting, sand casting, PA casting, vacuum casting, CNC milling, SLS & SLY Series production for batch sizes of up to 25,000 units Metal: aluminum die casting, zinc die casting, deep drawing, gravity die casting, sand casting Plastics: injection molding, thermoforming, extrusion Our Services: Project-related surface finish Coordination of the entire production project Advice along the value chain Assembly service, measurement reports International logistics service

We are suppliers for Stamped and bent parts up to 3000 N Tiefzieteile Laser cut parts up to 25 mm thickness Weldments Heat and surface treatment Duch Third

We process metal with heart and mind The proof of market relatedness and continuity Since its founding in 1924, we maintain a thriving collaboration with numerous commercial and industrial companies. The foundation for mutual success is our long-standing experience and expertise, our unrivaled performance and our legendary reliability. Our market and services We solve the specific tasks with all our knowledge and the latest tooling technology. We support our customers with passion through all phases of a project, however complex and convincing a perfect solution, as well as cost and schedule adherence. As a supplier in the field of punching, bending, pressing, we are equipped with latest machines and measurement techniques. Our strengths lie mainly in the tool Falling production for sheet thicknesses from 0.4 to 4.0 mm. In addition to manufacturing these parts further post-processing are possible in our home; trovalizing / vibratory grinding, cleaning, powder coating, painting. Our core competencies in sheet metal processing (stamping, bending, welding, assembly, etc.) are the result of many years of experience. Specific duties of our customers require individual solutions. We support our customers knowledgeable about all phases of a project, ie from consulting to product delivery. Here convince our services both professionally and cost comparatively as well as scheduled. Contributing a modern tooling and powerful resources at critical. Our competencies Development and Planning Toolmaking Punching Assembly Welding Powder coating

We present our innovative Start-up operating in the field of precision mechanics, set up to create and produce CNC turned and milled small parts, ground, rolled, knurled and knurled through a digitized innovative production process, with all interconnected production units , thanks to the management of the work order through the MES system The distinguishing feature of the company is the ability to create special parts with high precision design, in small and large series, in special steels, stainless and alloy, aluminum, brass, bronze, plastic and innovative alloys such as titanium. We aim to satisfy even the most demanding requests, providing qualified personnel, production organization and a range of innovative machines, in addition to availing ourselves of the collaboration of suppliers specialized in different types of processes and treatments. We will have the possibility to perform mechanical design with powerful CAD / CAM systems. The products manufactured by Kewa will be 100% checked both manually and with optical vision systems. The expected benefits will be a competitive advantage to allow small productions such as large scale, faster production process, 360 ° controlled, greater flexibility and greater productivity through reduced setup times, errors reduction and downtime. All this accompanied by a higher quality obtained by sensors that monitor the production and an ISO 9001 standardization. We thank you for your kind feedback and we invite you to contact us or reach us for any questions or information. You can also follow us on our internet and social channels.

KGN d.o.o. is a family business with more than 40 years of tradition and experience. We are specialized in the production of furniture and building fittings. We export 70% of our production to the EU market, mostly to Germany. Stamping is the main service and key competence in the production phase we deal with. We offer a complete service from prototyping, tool development, electroplating, assembly, packaging and delivery. We supply quality products to customers from a wide variety of industries. Our great flexibility makes us the perfect partner for your small or large product series. Quality is ensured with a great care throughout the entire production process. METAL STAMPING SERVICE FURNITURE FITTINGS AND BUILDING HARDWARE - hinges - connecting plates - connecting angles - bed fittings - door bolts - catches - custom made products https://www.youtube.com/watch?v=y-7Ik0n8bVs

We are a German manufacturer of high-performance stamping tools, stamped and hybrid parts (assemblies out of metal and plastic) serving numerous sectors including e-mobility, automotive, medical technology, sensor technology and electronics. We are a family owned business operating globally with headquarters in Pforzheim, Germany and subsidiaries in the US, India and Sri Lanka. Many years of experience of our design department and our toolroom allow us to implement the best solutions for our customers even in highly complex projects. In our production lines we combine many different production steps as well to the point of full automation. With our highly modern stamping machinery including brands like i.a. Burderer (25-80 tons press capacity) serial production in the range of 0,02 mm to 2 mm sheet thickness are our core compentence. We are an all-in-one partner at each of our location.

As a small company located in Cisnadie, Romania, and with more then 15 years experience in CNC parts production our team offer what every client want: quality and promptness at the fair price I can assure you will receive that. You don't trust us? Try us and see!

With the production of stamped parts and the construction of precision tools we have been successful since 1980. This makes us a competent partner. Through our experience, flexibility, highly qualified staff and modern machinery we can ensure technical excellence. Quality is our top priority. Our quality planning and monitoring at all stages of production provide a smooth process in their production. We are certified according to DIN EN 9001 and 14001 certified.

The predecessor of the company was founded in 1956 and now acts as Fazekas GmbH. To meet the market needs, we asked ourselves from the solution of the general problems in the service of the population in the production of spare parts and tools, the repair of industrial machinery, equipment meant um.Die modernize our machinery is an important step forward in the quality and also the quantity of manufactured products rose considerably. Parallel to the investments we introduced the quality control system ISO 9001, which we use today with success. Recently we expanded our field of activity with the planning of single-purpose machines and tools as well as 3D processing. Every year we spend expenses for development and learning about the latest technologies. Under our current plans, the establishment of a branch is at a European level, so that we can serve our customers quickly and very accurately. Our goal is to have a growth rate on faster and more stable base, the more satisfied customers among our partners.

Senator Solutions GmbH has been a reliable partner for industrial solutions of the highest quality for over 25 years. As a family business, we specialize in the development, design and manufacture of punching and casting tools, machine components and special welded structures. Our mission is to offer products and services that combine German quality standards with the cost advantages of our Serbian production. In addition to selling stainless steel and manufacturing hydraulic systems, our core competencies include the restoration and modernization of production machines. By using modern control and monitoring technologies, we ensure efficient and long-lasting production. Our goal is to maximize the productivity and lifetime of our customers' systems through our products and services.

Our core business is the manufacture of injection molds and their components. We design and manufacture 60-70 injection molds per year. These are tested on our own injection molding machines until they are ready for series production. Of course, we also take on the series production of these parts. With a maximum output of around 3.5 million plastic parts per month, we can also handle larger customer orders at any time. Our product portfolio also includes precision, spare and machine parts, as well as devices for customers from a wide variety of industries.

Your specialist for milling, turning, grinding, wire and die sinking in a wide variety of areas such as medical technology, mechanical engineering, the automotive industry, etc. We are also your contact for design and prototype production with the CAD program Solid Works.

In 1934, master locksmith Friedrich Elbracht founded the company in the former establishment Lützowstr. 4 in Gütersloh and began under the company name "FEFA Friedrich Elbracht" with the production of bicycle saddles, fireplace doors and grates. Since 1954, contacts were made also to local domestic appliance industry, for which the company has been increasingly active in the following decades as a supplier then. The production of our own products has now been set up in the production of clamps for exhaust pipes. Today we see the focus of our activities in our capacity as a supplier to the industry and deliver to customers in the areas of home appliances, construction, furniture and automotive industry. Our range comprises mainly the three areas stampings, weldments and assemblies manufacturing. In order to meet the increasing demands of our customers in the future, the company moved from its original location to its current newly built establishment in the year 2000th In the years 2011 and 2013, additional business expansions took place, so that currently are 4,300 sqm production and warehouse space on an area of 11,500 square meters. are 45 employees. Translation by Google Translate

Our company located in Saxony has specialized in the production of quality parts and assemblies made of all materials. CONTRACT MANUFACTURING A comprehensive range of services guaranteed You dimensionally accurate production from one source. We offer you the following services to: • CNC milled parts with high precision and tight tolerances • Specialist in custom milled parts • Precision machining in small and medium series • 3 - to 5-axis milling up to a size • Simultaneous machining on 5-axis milling center • Welding assemblies in steel, stainless and aluminum • assembly • Drilling and threading • Surface grinding • Test and measurement (3D) • Surface treatment CORE COMPETENCE Work in accordance with ISO 9002 · Rapid response to your requests for changes during the job preparation · Distortion-free supply of products made immediately mountable precision parts · Competent and reliable partner · Know-how of our employees is the most cost-effective, cost-efficient and productive customer solution Quality management according to DIN EN ISO 9001:2008

York Mechanical Engineering e. K. has specialised in the areas of special mechanical engineering, device construction, tool construction, individual part manufacturing and CAD/CAM manufacturing. From the simple instep device or SPS steered equipment installation up to complete solutions in the tool construction we offer customers an extensive know-how. Since the company is foundation in 2000 we work for famous enterprises in the food, packaging, glass, mechanical engineering, rubber, synthetics company´s industry. Our services include Sample and prototype construction Welding devices Cutting and stamping devices Devices for coating of car body pars Devices for the treatment and gluing Cutting knives and cutting materices Umformwerkzeuge, Biegewerkzeuge and subsequent group tools Prototype construction Project planning Construction Trick and Frästeile Zero manufacturing, individual manufacture and serial production Partial arrangement about call of delivery Plastic parts Sample construction and serial production Whether 3D-milling, Formfräsen, Hartfräsen, Gewindefräsen, CNC-Fräsen, to CNC tricks, hard tricks, Drahterodieren, Senkerodieren, data takeover 3D-to systems CAD/CAM, level loops, top loose loops, round loops, WIG MIG LIKES welding, - we have the right equipment. Almost all materials are used: High-grade steel (1.4021, 1.4028, 1.4029, 1.4105, 1.4301, 1.4305, 1.4307, 1.4401, 1.4404, 1.4435, 1.4571), steel (16MnCr5, 42CrMo4, C40, C45, FE510 (S355JR), FE360 (S235JR), 39NiCrMo3, 18NiCrMo5), machine steel, Duplex steel 1.4462, aluminium, bronze, plastic (POM, PVC, PTFE, PEEK). After a mechanical treatment the following ist possible: Caseharden, Induktionshärten, Vakuumhärten, Ölhärten, as well as in the area of the wide treatment and surface treatment washing, degreasing, to site foremen, electric site foremen, deburring, loops, Gleitschleifen, sandblasting, Phosphatieren, Brünieren, galvanising, nickel-plating, chromium-plating, Hartverchromen, anodizing and Passivieren and next hard treatment. Specialized professionals and a strict quality control allow us to comply with the highest standards and to offer a puncutal and precise service. We are successful because we take the partnerstrip with our customers very seriously. Since its foundation, York Mechanical Engineering has constantly grown with the new demands of the market.

The DMT Product Development GmbH is an independent development partner for innovative product solutions. With a team interdisciplinary thinking employees are developed in addition to the core competencies of leading companies, medical, instrumentation and fuel cell systems, from the idea to the approved competitive product. On the basis of our sound know-how and process-neutral development, we assume a highly structured approach, the responsibility for the successful implementation. As a partner of successful companies, we take a holistic project management functions for complex mechatronic product development. Translation by Google Translate

Kinemation AG offers standardized and modular, industrial automation solutions for the manufacturing and distribution industry. We have the know-how and the knowledge to provide our customers with automation systems with which you can optimize your production lines to meet the need for high punctuality. In addition to the automation department, we offer contract manufacturing in the field of injection molding, stamping, mech. Manufacturing such as milling and assembly manufacturing. We are happy to advise you in detail on the subject of contract manufacturing in cooperation with Kinemation AG. Call us without obligation!

The Adrian Michel Group AG is a group of companies, centrally located in the Swiss Mittelland. Our core competencies are in the areas of cutting, bending and deep drawing as well as in the assembly of complete assemblies. A specialty is visible parts for special design requirements. Depending on how the stamping we take care of the specific post-processing such as degreasing, grinding, stud welding, drilling, milling, thread cutting, finishing or thermal treatment. Our customers include international companies in the fields of power generation and distribution, household appliances, machinery and vehicle, etc. Thanks to our own tool and own design is the knowledge about the customer solution in our hands.