The technical capabilities of the WP hydraulic cutting technology: • Water jet cutting in 2-D (Including systems with up to 6000 bar and angle correction) • Water jet cutting in 3-D • Prototype • Custom • Design and construction of devices • Preparation and processing of CAD data What materials we can edit? • Rubber profiles • Plastics • Foam • foam rubber • Aluminium • Steel • Stainless steel • Titanium • Copper • CFRP • GRP • Marble • Stone • Acrylic • Glass • Special materials • and much more What are the advantages of water jet cutting? • Materials can, in contrast to all other separation methods to a thickness of 100 - 150 mm are processed • Cost-effective low-volume or prototype production • Economical separation process (no tool change, simple devices, no clamping devices) • Low program creation time • Cold cutting process (no thermal and chemical changes / change in the microstructure of the material, thus no material distortion) • Multiple operations (suchAs notches, holes, figure and contour) can be cut in one step • Scratch-free processing of the surface • No generation of toxic gases or vapors • no development of dust, chips or smoke • environmentally friendly separation methods (the use of natural substances such as water and sand) • high precision • No part warpage (except where appropriate material residual stress) • Processing option for (almost) all materials (even wrmeleitende or reflective materials) • Good cutting ability for composite and fiber-reinforced materials, suchB. sandwich materials such as CFRP or GFRP • No deformation of the material by pressure in the cutting area (only one cutting pressure of approximately 40 N on the workpiece) • No violation of the material surface (no hairline cracks in the cutting area) • Complex shapes are cut with high precision • clean cut edges without fraying and only with minimal burr • Filigree cut designs with fine contours and minimum bridge widths are technically feasible • Low material loss and waste (less kerf and optimizing material utilization) • Small cutting gap (in clean water 0.06 to 0.3 mm, using abrasive from 0.76 to 1.2 mm) • Cutting of any possibility, even complex contours and shapes, sharp angles, oblique cut edges and small inner radii • cutting ability in all directions • section may use or end at any point of the workpiece What speaks for the WP Hydroschneide technology

SSI Schäfer s.r.o is a long-standing supplier in the areas of cabin construction (sheet metal enclosures), welding components including mechanical processing and painting, and component assembly. In Hranice, we process approx. 32,000 tons of steel per year on 75,000 m2 with just under 1,100 MA.

MG CONSTRUCT d.o.o. is one of the Croatian companies in the metal industry, specializing in the production and assembly of a wide range of products with a focus on metal structures. We deal with the processing of steel, stainless steel and aluminum. The goal of MG CONSTRUCT d.o.o. is to provide our clients with flexible service and efficient implementation of their projects, to be a responsible employer and partner to its employees.

We produce holistic solutions together with our customers. We are your specialist for sheet metal parts made of steel, aluminum and stainless steel: - Stamping - Lasers up to 2 x 4 m and a thickness of up to 30 mm - Edges of up to 6 m and a thickness of 12 mm possible - Deep-drawing is possible for larger quantities From 1 to 500,000 pieces, we produce everything for you with love. A second heart beats in our chest. We are also one of the oldest HPL dealers in Germany: - Cut to size from HPL according to your wishes - Milling almost anything you want - Sandwich panels made of various materials for you. We work according to the principles of DIN ISO 9001:2000 even though we are currently applying for a new certificate. We are happy to be there for you. Just give us a call at 0931/40664-0 or anfrage@roehl.de. Best regards Your Röhl team and the Röhl family

The Kurt Eckstein GmbH manufactures since 1973 blanks in general structural steel. First was produced with conventional cutting machines. Due to the requirements of the cut part, we quickly realized That has to be invested in CNC machines. Claims to material - cuts that are caused by thermal processes, or not to cut, we have, in 1994, the water jet cutting technology integrated into the production line. Today autogenous flame cut, water-jet cuts and laser cutting are manufactured on modern equipment. For over 30 years satisfied customers. Quality, reliability and on-time delivery are our principles. Thus, we have earned the trust of our customers, who come from diverse areas of industry, crafts and trade. Technological advantages waterjet cutting • no mechanical and thermal damage to the cut surface • good use of material • cutting any contours • Minimal pressure on the workpiece • Unlimited variety of materials • Painted and coated parts can be easily edited Large water-jet cuts Appendix 1 - T11 2060 - Work area 2000 x 6000 mm - Water jet cutting with two heads Water jet cutting with cutting bevels - compensation Appendix 2 - WMC2 4030 - Dynamic - Work area 4000 x 3000 mm - Water jet cutting

RTA Technik GmbH from Lampertheim uses state-of-the-art equipment to produce high-quality sheet metal and pipe components, which are used, among other things, in the commercial vehicle industry.

Paul Brüser GmbH is a medium-sized family business based in Sauerland. Whether punching, drawing or welding, plastic injection molding, tool and prototype construction, Paul Brüser GmbH is your reliable partner. Our experience in a wide range of areas pays off. Through metal processing, plastics processing and component manufacturing as well as our own tool making, we manufacture products individually and flexibly according to your requirements. What you can expect from us: Flexibility — In any situation, we are happy to adapt to the tasks you have set and can develop qualified solutions. Quality — Strict controls ensure the safety and quality of our products. You can rely on our work. Service — We are always open to your concerns and wishes and provide you with efficient and professional advice on the implementation of various concepts.

Welcome to the UF Industries GbR. For more than 20 years, we have been bundling the necessary skills for everything to do with drawing parts in a separate department. Our employees advise and support you in the procurement of tailor-made special and drawing parts and produce high-quality and precise turned, milled and combination parts for you according to drawings - even in demanding geometries and in small batch sizes. Quality and function are our top priority. In order to achieve this, we are constantly developing ourselves and our portfolio. True to the motto: If you stop getting better, you stop being good! Our aim is to be able to offer an efficient and optimal solution for every specific, mechanical-technical requirement based on a drawing or sample. If required, we offer you fast and goal-oriented support in the realization of your constructions. Especially in the project phase, it is of crucial importance to choose the best, most modern and at the same time most cost-effective production technology. We would also be happy to optimize existing construction parts together with you.

The over 65 years making metal stampings and manufacturing washers are an important guarantee of the quality of our work. Our history is linked to a constant concern for innovation and development , both in our means of production and in the result of the flat metal stamping that we carry out. In addition to the metal stamping work, at Claudio San Martín we make metal embossments of up to 50mm , as well as precision stamping. Consult with our professionals and we will resolve any questions you have about our services.

Our company has been operating in the supply and manufacture of factory materials since 1991. Adopting its customers as strategic partners, our company aims to manage all the expectations of its customers, from product and service supply to after-sales service. Our company continues to provide customer-oriented service by providing the highest level of service, the highest quality product supply at the most affordable price in the shortest time possible. The systems and machines in our company; -SAP SYSTEM -Cnc Lathe -CNC Milturning -CNC swiss turning -CNC Milling -3D MEASUREMENT devices General and Special Production At the same time, automotive sector products, construction projects, productions containing technical drawings, machine parts and all kinds of industrial products are manufactured by our company. our certificates İSO 9001-2015 AS9100 :will be updated OHSAH 18001

We give ideas form The expanding company founded in 1999, comprises today with its 96 employees on 13.000m ² production area a wide range of manufacturing technologies and services. From design / development to the finished end product refined in strict compliance with all certified processes, methods and environmental issues we face as a competent supplier to all sectors of industry and crafts available. Precise, competent, innovative, there is the strong team of MVK from metal processing. As a long-term proven suppliers from all areas of metal processing, we know, to meet the increasing demands of our customers. Reliability, precision and competence are implemented in our plant to 13,000 m² with 96 highly motivated employees with a modern machine park daily. With perfectly optimized solutions from the CAD development to final product, we provide us with your challenges in all sectors of steel, stainless steel and aluminum processing. Whether laser or water-jet cuts for sheet metal tube punching, rolling and edging work, welding with robots or with proof assembly production or complete system solutions: We are here with the latest technology and a high degree of flexibility and creativity for you.

W e make your manufacturing processes expedient and economical. From consulting to service, we are your partner for customized solutions in adequate fixture, tool and gauge, as well as in the special machine and plant construction. We handle the complete production of your items and small series. We laser any contours and bend as needed. M odern, versatile equipment structure enables complete processing of your order. Motivated and experienced engineers, toolmakers and CNC professionals are the guarantee for meeting your quality standards. A ltenburg, known as the beautiful old residence and especially as Skatstadt, our company headquarters. From the Altenburger sewing machine factory, we have privatized the company's own toolmaking and founded in 1993, our WMA GmbH. Since our founding, we have grown steadily positive. Our core staff has increased from 24 to 40. Investment in highly productive CNC machine tools and the introduction of laser cutting technology in combination with a streamline manufacturing organization led to a substantial increase in productivity. Our range of services: On the basis * A modern production structure and the latest equipment and processing technology, * Quality assurance and process monitoring and a powerful metrology, including precision measuring room with CNC 3D metrology, * A highly motivated, well-trained workforce whose training is continuously adapted to the latest requirements, * And last but not least, by strict management, which a lean operating organization and cost consciousness has prevailed over the whole operating process we specialize in: * Design and manufacture of devices, tools and test equipment Devices * NC

With our many years of industry experience, the use of the latest technologies and best trained technicians we have made it our mission to accompany you as a client through each phase of your projects. Our range of services: Project management of the start-up phase through to implementation Problem solver for planning and implementation problems rapid manufacture your prototype Series producer of 10 pieces up to your annual water requirement System provider from raw material to finished product Refinement of your surface Assembly work Latest machines and controllers as well as best-trained technicians guarantee constantly for the top quality of your items.

ZIEGLER – a successful family business for three generations, with headquarters in Bavaria and a manufacturing facility in Daugavpils, Latvia. ZIEGLER manufactures to order according to customer requirements and project specifications. We also offer our customers material procurement for their specific projects: welded assemblies, bent parts, assembly work, painting, and logistics.

You expect precision and imagination in the machining of metals? Then you are exactly right with us. We offer a variety of solutions for metal machining with lasers, for example, CNC cutting of steel, stainless steel, aluminum, brass and copper. Our knowledgeable staff will be happy to help and advise you at any time. Your team at Laser Works Ltd! CNC laser cutting: high precision The Laser Works GmbH is since 1995 profiled partner for the precise machining of metallic materials. For customers of metal and mechanical engineering, plant construction, steel construction, shopfitting and exhibition stand construction manufactures and supplies LWR metal blanks and components of the highest quality. All made in our laser cutting parts are characterized by high manufacturing precision, high cut edge quality and bright metallic-sectional areas (in chrome-nickel steels) - costly post-processing such as deburring or sectional area cleansing can thus be eliminated. The company's quality management system is certified according to DIN ISO 9002. Our product range includes single part production and series production in unlimited quantities up to a edit box size of 3000 x 1500 mm. The machines can process sheet metal thicknesses of: structural steel and high-strength steel up to 20 mm, high-alloy stainless steels up to 15 mm, aluminum alloys up to 8 mm galvanized sheets to 3 mm to 3 mm brass and copper on request. Blank processing of profiles up to 100 mm height are also available on request. Working with LWR LASER WORKS means to have a powerful full-service provider of a wide range of editing options. Our expertise lies in the following areas: conventional metal construction, welding work as TIG, MMA welding and oxyacetylene welding, cutting processing through water-cooled fine cuts and manufacture of milling and combustion parts. Core and specialty of our range is the use of laser technology.The CNC laser cutting offers in the field of metalworking invaluable benefits, because with minimal heat input is an extremely narrow cutting gap for mild steel and high-alloy steels, aluminum, brass, copper and plastics accessible. The reproducible precision (repeatability) is a guarantee of consistent and reliable precision and short processing times for large quantities. Very powerful programs in our home lead to the import of all graphic file formats and any fonts. The range of surface treatment by laser comprises the solid phase transformation, Laserumschmelzlegieren and laser cladding. Reliability in order processing is also very important in LWR LASER WORKS such as the production of specific products of the highest quality in a short time. Special order products are already shipped on the day after the order. Of these "just-in-time" - deliveries, the customer benefits, which is located in the pressure of ever shorter production processes. Catalog of services CNC laser cutting * Minimum heat supply * Narrow cutting gap * High repeatability * Structural steel, high alloy steels, ceramics, aluminum, brass, copper, plastic * Thicknesses up to 12 mm stainless steel, 15 mm mild steel * Generate any fonts * Import of all graphics - file formats Laser surface treatment * Solid phase transformation * Laserumschmelzlegieren * Laser cladding * Applications on components: Steel materials, titanium materials, bronze materials Everything from one source * Conventional metal * TIG...

We offer laser processing of metal components incl. CAD design on. Flexible production in shifts is possible.

Welcome to Technical Service Gratkorn Your reliable partner for innovative maintenance solutions. With many years of expertise and experience, we are setting new standards in three specialized areas: Mechanical processing: In our ultra-modern processing center, we offer tailor-made solutions for the reconstruction and manufacture of defective components. Our flexibility in procuring spare parts and our innovative technology ensure precise results. Valve service: We offer comprehensive repairs for flaps, ball valves and safety valves. Through close cooperation with accredited partners, we ensure that your systems are repaired reliably and efficiently. Roll grinding: Our roll grinding service stands for precision and versatility. With cutting-edge technology and an experienced team, we optimize your production processes in the printing, paper and plastics industries. Our commitment to perfection is reflected in every project. At Technical Service Gratkorn, the focus is on people — our dedicated employees and our valued customers. Discover a world of technological innovation and first-class services with us. We are looking forward to working with you and earning your trust.

Precision and quality in sheet metal and metal processing Our customers and their products are at the center of our work — from our founding in 1994 until today. Originally started as a pure sheet metal manufacturer, over the years we have grown into a complete solution provider for metal components. On request, we support your product from development through the prototype phase to series production. Our goal is to meet your individual requirements and ensure consistently high quality. Using smart people and technologies, we produce your product precisely and efficiently from sheet metal: Blech.Smart.Precise. Key facts: