Lasers A laser penetrates contact sheets, tubes and profiles. At the point where the focused beam impinges upon the workpiece, the metal begins to melt away. This results in a narrower kerf, barely wider than the beam itself We use the laser beam fusion cutting as a separation method for stainless steel, aluminum, brass, bronze and titanium. The combination of our 4000-watt laser system from Trumpf with the Fladder-deburring providing its customers a number of special advantages: We can produce almost any shape. The material heats up hardly and does not warp. The cutting edges are straight, free of burrs and clean. The components can be processed immediately. Bending Bent parts can be found in technical applications in ever-increasing numbers. They enable materials, weight and cost savings. However, precisely bent sheet metal parts require extensive knowledge of materials, precise work preparation and true machine powerhouses. We work with a Trumpf press brake with 6-axis stop, automatic angle measurement system and 230 tons of pressure. In our work, preparing the optimum bend sequence is determined to create its processing using 3-D software. In addition to the geometry of the bending portion, the empirically determined characteristics of the material are considered. This can be programmed and produced within a very short time even complicated bent parts. Welding Stainless materials are now available in great variety. Exact knowledge of their behavior during welding are therefore a fundamental prerequisite for the quality-oriented performing welding operations. And: Stainless materials do not come around a corresponding weld-treatment if they are to remain rust-free. As specialists in stainless materials, we offer our clients professional solutions around the welding and finishing of steel and aluminum. We perform the welding process TIG, MAG and MIG and spot welding and stud welding. As a post-treatment process, we have preferably pickling and passivation, but also sanding or bead blasting. Edit Machine parts, panels, framing, or container - in addition to welded joints play mechanical joining techniques an essential role in the structural design of composite systems. The additional mechanical processing of sheet metal, pipes and profiles fits into our production flow seamlessly. We manufacture holes, eyelets, threads and cuts and can offer our customers the manufacture of turned and milled parts made of rustproof materials as well as the riveting, bonding, welding or bolts injection of standard parts. Surface As specialists in stainless steel and aluminum we are very familiar with the decorative design of the product surfaces.We advise you gladly. Because the right surface treatment affects not only the appearance of the products. Also, the strength and the cleaning behavior are influenced by it. Depending on the application or customer preference, the method of glass bead blasting, grinding, polishing, electro polishing, chromating, anodizing and powder coating available. Labels can be designed as a laser marking, engraving or the screen printing method.

Welding and machine components, large components, concrete-filled welded structures Our customers include leading manufacturers of textile machinery, machine tools, Printing machinery, lifting equipment, special purpose machines, packaging machines

Technical rollers of all kinds - Drink & Schlosser is furnished to all even the most demanding tasks of rolling technology. The extensive range of types of rolling specialists from Krefeld ranges from cooling drums on heating, cooling and calender rolls up to central cylinders for the flexographic printing industry. Whether made of steel, stainless steel, aluminum or special materials, whether hardened, chrome-plated, spray coated or rubberized - D & S is in the world of the rolls at home. Drink & Schlössers supplies various industries: from the printing and paper, textile and plastics technology over the wood processing to confectionery and food industry. At the beginning of each project, therefore, is always the intensive consultation. In cooperation of both partners so creates the optimal, tailored to the customer's product. With all areas of rolling technology well moored, is the special strength of D & S in the construction of central cylinders for flexographic printing.About a quarter century of experience in this field vouch for precision and quality at the highest level. Today, central pressure cylinders are manufactured as welded steel construction in any desired surface finish of up to 4200 mm diameter and concentricity tolerances up to 5μ. Rollers types Cooling drums Kühwalzen in double jacket construction with and without Leitspiralen Heating drums (steam) with or without displacement Heating rollers in double jacket construction for hot water or thermal oil circulation heating Calender rolls, peripherally drilled with Leit-/Stützspiralen Calender rolls with displacement Counter-pressure cylinders for the flexographic printing Drying rollers for the food industry Heating Gelierwalzen for flooring materials Added to: rolling overhauls, surface repairs and contract work in the burning, rounds, drilling, welding, milling, turning and grinding belt Service and Subcontracting Our extensive machine equipment and the applicable processing techniques allow us to perform beyond the pure Walzenbau addition, a wide range of services and payroll processing. Overhaul and repair of rolling Zapf workup / exchange, bearings repairs Sanding and recoating of worn surfaces Implementation of recurrent pressure monitors technical acceptance Inventory scan Flow test and flushing of clogged cooling and heating rolls Dynamic balancing in up to three levels, up to a diameter of 5000 mm Subcontracting on rotationally symmetrical components (rollers, shafts, axles, shafts fans, turbine rotor, fan wheels, worm shafts).

Bade und Rinscheid is a specialist for metal processing of aluminium, steel, stainless and high-strength steel and other standard materials (Cu, Ms) Toolmaking, stamping production including surface treatment and global just-in-time delivery for your provision of Sheet metal technology for automotive control systems Heatsinks EMV shielding High tensile stainless spring steel parts Housing components and assemblies for standard- and special plugs Precision bending and deep-drawn parts for assemblies for rubber-metal or plastic-metal combining techniques Reinforcements as an inner part for vibration damper/absorber e.g. Sleeves and drawn parts for chassis frame components Axle spring plates for pivoted bogie of railway vehicles Stamped and bended parts and assemblies Brackets for automotive sensors and functional assemblies Handholds and edge protection for wooden boxes according to DIN and TLA 004 Special fittings BADE UND RINSCHEID processes coil and strip steel from 0,2 up to 8 mm thickness. Especially for the use of aluminium – but not only – the machinery and equipment have optimized functionalities. Automated stamping machines, hydraulic and eccentric presses with forces up to 3.150 MPa process coils up to a width of 600 mm. Small tolerances, high demands with regard to planeness e.g. and other sophisticated specifications are covered and as far as possible already checked during production in line. Our industrial cleaning devices – built in accordance to environmental demands make use of fluids that are CHC free. The possibilities are given for the use of degreasing processes according to VDA 19 or DIN ISO 16232 e.g.. The considerable and responsible run of processes leads to products with high quality standards. Our lean organisation assures short lead times in production and a serious focus on customer demands.

Experience, quality and Kontuität for over 40 years: The company has been manufacturing Schweigert 1959 progressive tools, drawing tools and simple tools for various industries. Almost as long as we also supply stamping parts to our customers - produced on presses and punching machines from 3t to 340t maximum pressing force. Of course, we also offer sub-assemblies or welding, whether as spot welding, stud welding or TIG welds. We work for many years after the Qualtätsnormen DIN AN ISO 9000 and are therefore able to provide our customers reliable to use according to his requirements. From small to large Our products range from the smallest parts for the electronics and precision engineering in the milligram range up to part weights of more than two kilograms. Flexible We adapt also the quantity requirements of our customers. In addition to large-scale production, we are also able to produce products cheaply in smaller and smallest numbers. This is made possible by a development partnership with our customers to develop optimal as possible, product-oriented solutions.

Our Company The most modern techniques and machines in production, and timely methods of work, professionally qualified and motivated employees are a prerequisite for us for the highest quality standards and customer satisfaction. This objective covers all areas of our company. Be it. In consulting, construction, sheet metal fabrication, welding and joining, surface treatment, assembly, or in perfect logistics Since 1850, our company deals with the treatment and processing of metals. In these many years, we have a know-how acquired it allows us to professionally skillful solutions to problems in sheet metal processing to offer. The services We are a contract manufacturing operation for sheet metal processing, which is at the highest level and precise quality will satisfy the demands of our clients and highly appreciated by our services and our expertise. This is supported by the latest technology, which ensures a quality-and quantity-oriented production. Our quality management system according to DIN EN ISO 9001:2000 emphasizes the importance of well-functioning metal process chain for the benefit of our customers.

Our company was founded in 1994 and has been active since then in metalwork manufactures. Tecor Prest has been exclusively family-owned business . The founder , Telea Ionel , has guided the company's fortunes ever since its foundation and in 2003 he passed away leaving the company in the hands of the next generation . Since 2000 we added to our list of activities another few important domains in industrial activitiy , and we started the collaboration with other important companies in the romanian and european industry . Now , after almost 15 years of experience and tradition our company offers you a wide range of quality products and services in the domains : - metalwork manufactures - mechanical process (milling, turning, grinding) - electrical engines repair and maintenance

Welcome to Grenzebach Grenzebach is an internationally active, expanding group of companies with its own production facilities in three currency blocks. Our core values drive and shape our activities: We stand for the stability and values of a family-owned company. We regard our employees as the greatest capital our group of companies possesses. We put our customers in the center of our activities. Our innovative technologies make us a global leader. We boost our customers’ success through offering the highest quality products. We create high-quality apprenticeship posts for the coming generations.

Started in 1994 as a tool shop, the company Künzel is now available for high quality Processing of sheet metal, milling and turning parts, as well as the individual production of devices and soldering frames. We are expanding our manufacturing technology constantly to meet the increasing demands of the market to do justice.

GKR STEEL s.r.o. is a Czech company founded in 1998, which specialises in made-to-order production of steel constructions, technological units and precise metalworking. The company has its seat in Roudnice nad Labem close to the D8 highway which guarantees good transport accessibility not only within the country itself but also within Europe. It is 50 kilometres away from Václav Havel Airport in Prague, 20 kilometres away from the freight port on the river Elbe which is further connected with rail freight transport. Czech border with Germany is 70 kilometres away. All production takes place in our own production facilities having the area of 8000 m². Thanks to our technological equipment we are able to offer the complete production process from the material procurement, its splitting, working, machining, pressing, welding, surface finish and the final assembly. We keep modernising our production tools and increase the production capacity. 80% of our production is exported. Our production capacity is approximately 250 to 350 tons of steel per month depending on the difficulty o f the construction.

Hopf GmbH is a medium-sized family company that has specialized in new developments in the areas of building, ventilation and environmental technology as well as the manufacture and installation of apparatus and systems in various branches of industry. The areas of machine and apparatus construction as well as steel and sheet metal processing are also among the core competencies.

Customer satisfaction is our top priority. The simple recipe for success is the achievement of outstanding performance. And it is precisely this achievement that we provide for our customers through our qualified employees and modern machines. Individual production (prototypes), small, medium and large series When manufacturing our components, we attach great importance to maximum precision and productivity. On our modern CNC machines we manufacture your parts / assemblies at the highest level. Due to a constantly new machine park and application strategies, we are at the cutting edge of production technology / production possibilities. In mechanical processing, we value the highest precision and productivity. With our machine capacity, we are the ideal partner for your outsourcing project. Another strength in our company is the manufacturing on CAM systems, so we are able to make even the most complicated contours.Combined with effective, coordinated production steps, we realize complete machining from the design to the ready-to-install component. CNC turning -CNC milling up to 5 axes -Drahterodieren -CAD-CAM manufacturing -3D construction -Flachschleifen -Startlocherodieren Tool and jig construction including construction, welding and assembly of assemblies Quality was already a big issue for us as certifications were not yet standard. Our quality management system has existed for many years and is consistently applied and monitored. The constant improvement process and the satisfaction of our customers are constant companions of our daily creation process. Our specially trained specialist personnel, our monitored test equipment and our regular quality records guarantee our customers consistent quality. Upon request, each customer receives our currently valid quality manual and a copy of our certificate.

A brief introduction We employ metal machinists, a shortage occupation in metal industry nowadays, who produce small series of special parts on traditional machines. In this sector CNC machines are so widely used that there is a shortage of traditional machines and excess demand exists for them. With this in mind, we will purchase several traditional machines during our current developments to increase our capacity in this field. We, of course, have CNC machines as well and develop our machine pool regularly. Based on the orders received, we are able to draw up a production program for 1 month in advance and allocate our resources. Our customers basically include producers which manufacture special purpose machines for their customers (e.g. manufacturers in printing industry, shipyards, industrial scale manufacturers, food producers, automotive industry, manufacturers of medical equipment), and we produce components needed for these machines. BAT tobacco factory is included among our customers, and we manufacture wear/consumable parts required for their daily production. We produce components and subassemblies for medical equipment manufactured by Siemens and GE factories. Besides, we supply units for robotic production lines of AUDI and VW factories. The company had its first premises at the residence of the founders in Pécs. Production took place in a small workshop. At the beginning temporary workers were working in addition to a single permanent worker. The first orders we received involved simple processing of materials. In addition to manufacturing new products, we undertook and still undertake to carry out repair works. We undertook all works therefore outgrew the small workshop we used at the beginning, and in 2007 at Pécs-Hird we acquired our first production hall suitable for carrying out industrial activities with a floor space of approximately 250 m2. Here we were able to carry out production on a larger scale and serve more customers. Owing to our continuous progress and current developments, now the floor area of the production hall exceeds 1000 m2. Concerning work organization, our activities include manufacture and assembly of special-purpose products, machines and machine units. Therefore our machines and equipment are universal and able to satisfy all demands.

In addition to turning and milling, VARIALUX offers the metal forming of metal spinning, which is only rarely offered. This is done both conventionally and CNC-controlled. Other processes: deep drawing, stamping and edging. Welding and soldering are just as much part of the scope of production as painting and powder coating after prior surface treatment. Special processes for processing lead parts have been developed for production in medical technology. B. include lead welding and lead gluing.

We offer quality CNC parts and solutions.

I have been working in the metal sector for around 15 years, where I have mine Completed an apprenticeship and in 2015 the foreman for mechanical engineering & Operational engineering completed. Starting in 2020 with metal decoration, fire pillars, etc. has A lively locksmith business has developed over the last three years. The professionally equipped one is located at the parents' farm workshop, where we are constantly developing and gladly yours Accept orders. “Challenge is motivation! ”

Your partner in mechanical subcontracting We offer a subcontracting service for mechanical components and assembled machines, in which, starting from the customer's project, we study its industrialization, we identify the most suitable production process, we rely on the most suitable suppliers for each individual production phase.

Turnkey Machine Projects

Based in Normandy, we are experts in stainless steel manufacturing, from cutlery to deep-drawn components featuring invisible laser welding. Our production capabilities include an in-house continuous vacuum annealing furnace, along with high-capacity, fully automated lines for deep drawing, welding, and polishing.