"Do not go - there's not!" True to this motto Budack is worked from the beginning in the locksmith. Heinz Budack, master of general machine, bought in 1977 in a forest Locksmith and started his own business. On their own land was cultivated and a workshop with drill - rotary, - set up milling and grinding machines. The production at this time consisted largely of small orders in the area of machining. In 1983, his wife worked with in the company and supported her husband actively in productive work. With the turn changed the order situation, Heinz Budack did not give up, but took on the challenge. Never before had so many fences and gates made. Every door, every fence is unique, speaks for quality work, and so the customers do not stay out. In the small workshop, production could not be realized in the long term, so Heinz Budack built in the years 1995/96, in the industrial area south forestry a new production hall. In October 1996, the new production was over 3000 square meters with 10 employees, including his wife and son Matthias are added. Locksmiths and locking technology in addition angeboten.1999 as a service also has son Matthias completed his training and qualification for the "champion metal worker trade" and thus ensures that even in the next generation of Locksmith Budack the traditional production continues. On 31.12.2008 it was time, symbolic of the company key was handed over to his son Matthias Budack, which is now successfully lead the family in the future.

LSI Lamiere Speciali Inox Spa, stainless steel coils, strips, sheets and quarto plates LSI SpA was founded in 1986 as a service centre for stainless steel flat products. Throughout the years, continuous investments in modern equipment, our experience and our reliability have allowed the company to expand to its present size. Hot and cold rolled coils are cut into sheets, strips and blanks of the size required by the customer. The material can undergo surface processing such as grinding and scotch brite and then be protected with adhesive plastic film.

We have always, whether in the past and on to the future, believed that any significant changes can happen, only if something is actually done to made it happen Therefore and based on this belief, the future of MIRALAGO has always been targeted, by placing ourselves in a respectable position by offering products and services that enhance and add to the image that we all want to achieve. In following the current trends, we are prepared to offer to all our Business Partners new working tools, like catalogues and this Web Page. We hope that they can create stronger connecting chains to ALL.

ABN is a middle class family in the 3rd generation, which develops systems for electrical installations, manufactures and distributes over electrical wholesale trade. We offer a complete product range in the counter space and distribution technology and building system technology. The management and staff of the House ABN operate on the principle, in practice - for practice. " All products are subject to constant review. Wishes, new insights and suggestions are implemented in a timely manner, if possible. Besides our own products, we offer contract manufacturing in the field of punching, bending, welding, powder coating and assembly. As specialists in the field of sheet-steel housing production We provide you with our know-how available, from development to final product and including logistics as needed up to your customers.

The company was founded in 1986 in ASEDO Dombühl We employ 120 highly motivated employees, mainly metal and electrical workers in two shifts. Our key business principles are: Use of resources by qualified and motivated employees for the benefit of our customers, as well as to our company The business concept is based on independent, responsible employees who get involved with fun at work and maintain a partnership, human interaction with each To maintain and expand through their own goal-oriented training and education continuity and quality Their top-quality products to manufacture. To achieve this, we pay attention since time immemorial in all areas on the consistent implementation of this principle. This supports our existing since 1995 certification in Quality Management, since 2001 according to DIN EN ISO 9001-2000

Bergmann & Hillebrand is a manufacturer of precision perforated metals and their further processing into stamped, drawn and bent parts. As a supplier we manufacture customized serial parts for various business fields. We are specialized in customized parts with small hole sizes and maximum demands on visual and functional quality. We can realize open areas of up to 70% and can adapt the perforated field to your functional requirements by means of our extensive up-to-date plant and our own tool manufacture. Our services: Precision perforated sheet metals, thin sheet metal products and functional components for the most diverse business fields and product applications Know-how for standard applications and individual problem solutions, in perforation as well as in forming and surface treatment Ready-to-be-installed delivery: wet painted, powder coated, anodized or chromium plated -- on request packaged and printed Delivery of high-quality perforated sheet metal on endless coil or as blanks

Veltech is an engineering & manufacturing company located in Turkey. With its wide variety of technologies (Machining, turning, welding, coating, sheet metal processing and Heat treatment) on its machine park, Veltech is an AS9100 certified supplier of Aerospace & Automotive companies.

We are producing metal parts from black and stainless steel using next technologies: Plate laser cutting (up to 3000 x 1500 x 20 mm) Bending, rolling, stamping, drilling MIG, TIG welding, polishing Powder coating Assembling and packing We propose for our clients: Small and middle batches production European quality Fast delivery All technical staff can communicate in English

mechanical engineering Plant construction and process engineering CNC machining center Development and construction offices Industrial maintenance (assembly, repairs, maintenance)

Bosch Rexroth: Drive and control solutions from Rexroth fill jam breakfast and support the printing of the daily newspaper. Manufactured on the way to work in the car, engine, gearbox and body with Rexroth technology, we drive past fields where farm machinery using Rexroth Hydraulic order the fields of wind energy farms with Rexroth transmissions and building sites where excavators and Bulldozers with Rexroth components work. In the machines in the factories, furniture and computers in offices, in short, in almost all industrial products Rexroth has contributed to efficient production. This is also true for cultural events: Move Rexroth automation solutions and control the stage techniques of the most famous opera houses and theaters in the world. This wide range can cover with tailored solutions Rexroth is only because the staff are always open to new ideas and are always looking for better solutions. Location Erbach: At our location in Erbach im Odenwald, we manufacture System components for the controller, operation, visualization and PC-based control solutions, control systems for resistance welding and mechanical Komponeneten, here especially housing, which are nibbled without cutting of sheet metal.

Encounter with tufts: a fine-cutting experience. We are a traditional medium-sized family business that specializes in chipless metal processing and is home in Franconia. We started in 1921 as a fine mechanical workshop for the regional industry. Today, include a variety of large industrial companies all over the world to our customers. Already since 1967 we consistently fine cutting technology. In a closed operation, ready to install and highly functional precision parts are created according to your individual wishes.

Sheet metal parts Plastics Processing

More than 40 Years Experienced in Tobacco Industry Jacobi has been established by Lothar Jacobi in 1967. He became favorite partner to the leading German tobacco companies - focussing on maintenance, rebuilding and manufacturing of outstanding solutions. After having merged with the Eastern German tobacco specialist Systemtechnik his son, Frank Jacobi, has taken over the management of the well established manufacturer of customized equipment. Storage, dosage and transportation of tobacco bins, cardboard boxes and cutfiller represent Jacobi's core skills. Their individually designed solutions link Primary and Secondary machinery at high quality standard. As the expert in the industry Jacobi is successfully meeting the exclusive requirements of global acting companies in the tobacco industry.

From idea to prototype to series is the philosophy of our company. We support our customers from product development to series production, relying the product idea through a complete mechanical process chain business sense to. Our services range from design, material and production technical to economic aspects. The Kotte GmbH was founded in 1933. Our philosophy says it all: Many well-known companies have thus successfully entrusted us with their most complex projects. It is not really necessary to note, but for all orders, we assure you best quality and reliable appointments.

Thermotec AG is an experienced producer of sheet metal components and assemblies through to the assembly of packaging for consumer products. This know-how with the expanded capacities can now be used for company growth.

Own production facilities In our own production facilities, we make various products to order from stainless steel or painted, galvanized, and hot-dip galvanized. ISO certificates 2015 we introduce ISO 3834 , welding certificates for TIG, REL, MIG, MAG processes , and we guarantee product quality with them. Support and maintenance Plant, machine and after-sales technical support protects your investment.

Léman Industrie is a more than 30-year expert in automatic precision stamping, automatic precision insert molding with about 75% in the automotive activity and 20% in the electrical activity. Main products : connectors, mechatronic sub-assy

MVM Industries is a brand name created to identify a group of companies focalized on the industrial specialization of cold forming metals. It has its origins in the foundation of the head company MVM Srl in 1969, which has been controlled 100% by the family holding company since, and is completed by Realmec Srl and IMG Srl today. The group’s activities have been centralized in the head company since 1998 and are subdivided organizationally through the creation of specialized subsidiaries and the acquisition of other companies that complement the holding company’s portfolio in its capability to respond to market demand in terms of quality, volume and services. MVM Industries positions itself on the market as a highly specialized operator that can support its customer, not only purely in terms of production, but also in co-design, product development, form design and production, logistics and post-production services. MVM Industries internationalized its productive plant in 2005 by constructing the Chisinau plant in the Republic of Moldova, where Italian organizational ability and competence are successfully merged with the productive energy of the emergent Eastern European countries in terms of cost/product. A high level of specialization and an elevated flexibility in process and product sustained by know-how and unique competence in the sector, position MVM Industries in a pivotal position for today’s international market, guaranteeing an unusually valuable customer-oriented service as well as high-quality performance. More than 100 employees, 15,000 m2 of manufacturing plant, loyal international customers of indisputable prestige such as Fiat Auto; Philips; Indesit; Ariston; Denso; Caufetaux & Maury; Benelli Armi and others, and a turnover of 19 million euros for 2006, these are the parameters for assessing the real value of MVM Industries’ achievement and growth.

With the company move in 2013, Elpas gained a production area of 5,000 m2. Thus we were able to expand our machine park immensely and optimize our production processes. Our goal is to achieve the best possible customer satisfaction and product quality with the existing competition in the automotive industry. It is important for us to provide technical advice before and after the start of the project, any suggestions / suggestions for improvement for product design and the best possible planning of the necessary tools, test devices, etc.