SPR GmbH is a service provider for the production of turned and milled parts and your reliable contract manufacturer! The strengths of our production lie in the production of individual parts and small series. Regardless of whether it's turning, milling or turn-milling combinations, our machinery allows us to be very flexible for you. The maximum travel distances for milling are 1,100 x 600mm and with 5-axis simultaneous machining, we can process workpieces of up to 1.2 tons. On our lathes, we can produce chuck parts from the smallest diameters up to Ø800 mm. Shafts up to Ø500 mm and a length of 2000 mm can be produced. We have had our quality standards certified in accordance with ISO 9001:2015 with our QM system!

Facts: The BB machining is a wage rotary company with about 15 employees. With core expertise in the flexible and customized manufacturing, we always strive to ensure our customers high process reliability. Our rotating parts can be found everywhere, where high precision is required. From writing instruments to the furniture, in the control, control and drive technology, tool and model as well as in general engineering to optical industry or even in medical technology. There are lots of industries that we serve. Their development and construction Your purchasing and quality management takes with us coherent solutions to implement your requirements. Options: Produce Multifaceted rotating parts, is for us an everyday task - our ranges of rotation • From about Ø 3 mm up to Ø 32 mm from the rod • Maximum length 300 mm • 6 kt. 3-27 mm Further processing: Post-processing such as grinding, Trovalieren and Diamantiern are of course possible.For heat treatments and surface finishes are our competent partner companies. Materials: We manufacture simple and complex precision turned parts in virtually all materials, including: • All Al-Si alloys and in particular • Stainless steel (VA) steels • construction, deployment, remuneration, nitriding steels and tool steels • Brass, bronze, copper, etc. • Titanium alloys • plastics such as POM or PEEK Other materials? Ask us! Batch sizes: Both simple and highly complex parts are produced in our home always from the perspective of economic efficiency. • Small to medium batch sizes from lot size 1 possible • small series up to 50 pieces • Small batches of 50 to 500 units • and medium runs up to max. 100,000 Quality: Quality and reliability of our products are reflected in the satisfaction of our customers and created on the basis of a modern quality management system certified according to DIN EN ISO 9001:2000. For the implementation of the clear objectives of management, a holistic and integrated manufacturing and inspection planning and continuous monitoring of the entire process is guaranteed by two specially trained staff. This assures you a highest quality standard from the home BBZ.

I am Kornél Ledniczki, managing director and co-owner of Stahl CNC Hungary Kft. Karl Stahl and I founded the company in 2015. I worked for him in Germany until 2015, and that's how the idea came up to set up a joint company in Hungary. Since then, we have already found many satisfied Hungarian, German, Austrian and Belgian partners. Once we have met our deadlines, we can meet our deadlines almost 100%, and the components we produce must not only be good, but also beautiful.

H7/h6 OÜ is an Estonian precision engineering company producing precision-machined components from a wide and diverse range of materials.

Frech Drehteile GmbH has been your competent and efficient partner for high-quality CNC turning and milling work from all common machinable materials since 1980. Innovative thinking, growth and continuous modernization characterize our company. This combines the flexibility of a family business with the performance of a medium-sized company. The company was founded in 1980 by Franz-Xaver Frech. Constant expansions and relocations to larger production halls made it possible to satisfy growing demand and turned the small business into a medium-sized company, which is now run by son Patrick Frech in the second generation.

What happened in 2004 with the introduction of precision turning parts for automobile shock absorbers, we have developed purposefully and consistently until today. In doing so, our strengths and services rest on a broad-based, interconnected network of partner companies with the widest range of manufacturing technologies The entire spectrum of special and drawing parts is available and subsequent actions. Through our special focus on these areas, we efficiently bundle synergies and create cosmetic benefits for our customers. MAGRO serves customers, both from the automotive industry and machinery & an¬la-engineering, as well as from railway technology, vehicle construction, crane & lifting technology, for agricultural & construction, as well as logistics & warehouse technology NiK

Manufacturer of injection molding tools 1 to. up to 60 to. multiple cavities 1K, 2K, 3K Mucell and SGI

WiggenTech GmbH is an owner-managed family company based in Lippstadt. Our company focuses on the development, production, coating, trade and sale of fasteners for customers in the industrial and automotive sectors. WiggenTech GmbH successfully became independent by spinning off the in-house turning and drilling company of Hella Kg.a.a. as part of a transfer of operations in accordance with §613a in 2021. As a “start up”, we can therefore already draw on decades of “know-how” in the production of complex fasteners. Every year, we produce around 15 million precision turned parts, which are used as fasteners by various vehicle manufacturers, automotive products and in industrial applications. We are particularly proud of this. With their expertise and innovations, our employees form the foundation of the company and guarantee our current and future success.

Why you are right with Schneider turned parts? Because we are already on the market since 1952, we continue to evolve, have a small staff to respond quickly enough and skilled workers to deal with all the requirements of our customers always meet. Long-term business relationships prove that our performance fit. What Schneider turned parts for you making? We manufacture long turned parts up to a diameter of 38 mm and a length of 1000 mm, also short turned parts up to 60 mm in diameter made of aluminum, copper, steel, stainless steel, brass and plastic. We milling, drilling, grinding, pressing. Here we are, we specialize in medium and large series. The finished parts are available either completely or we store them in our computer-controlled warehouse for you. We work with a modern equipped PPS and MDC system and put all the tasks required by our customers to quickly and effectively, eg consignment stock, Kanban deliveries or dial-up calls. What else is there interesting about Schneider turned parts? Our skilled professionals, we form largely from themselves and develop them to professionals so that we can meet customer requirements in the future. Already experienced in training as a machinist and experience our employees, our customer orientation. With our modern heat exchangers, we use the waste heat from the engine to heat the production halls, which saves us operating costs and helps the environment. With flexible employees in multiple shifts we can keep delivery times short and absorb demand peaks.

Hilger GmbH works as a developer and supplier for machinery and Plant construction and the automotive sector. The areas of work include Development and production of individual and series parts up to batch sizes of one million, the development and construction of prototypes and assemblies, and assembly work. In over 30 years, Hilger GmbH has been able to develop extensive core competencies in develop respective areas. The work is characterized by the integrated product development. Direct collaboration between development and production enables cost-effective product development, low production costs and high product quality when entering the market.

Welcome to the UF Industries GbR. For more than 20 years, we have been bundling the necessary skills for everything to do with drawing parts in a separate department. Our employees advise and support you in the procurement of tailor-made special and drawing parts and produce high-quality and precise turned, milled and combination parts for you according to drawings - even in demanding geometries and in small batch sizes. Quality and function are our top priority. In order to achieve this, we are constantly developing ourselves and our portfolio. True to the motto: If you stop getting better, you stop being good! Our aim is to be able to offer an efficient and optimal solution for every specific, mechanical-technical requirement based on a drawing or sample. If required, we offer you fast and goal-oriented support in the realization of your constructions. Especially in the project phase, it is of crucial importance to choose the best, most modern and at the same time most cost-effective production technology. We would also be happy to optimize existing construction parts together with you.

High-precision devices, milled parts, small batches and injection-molded parts — these are our areas of expertise; we produce these products at our plant in Jennersdorf with the greatest care, to the highest quality and with irrepressible commitment for our customers from a wide range of industries. Accurate, timely, flexible and at attractive prices.

Upper Lusatian workshops offer a wide range of fields of activity The Oberlausitzer Werkstätten (OLW) are part of Diakoniewerks Oberlausitz gGmbH. In the Upper Lusatian Workshops, people with disabilities have the opportunity to participate in working life and vocational training in accordance with Sections 219 - 227 SGB IX and the Workshop Ordinance. Around 1200 people with disabilities work at a total of six locations in the districts of Bautzen and Görlitz. They are guided, accompanied and professionally trained by qualified specialists. Vocational education is standardized and is carried out in the vocational training sector in accordance with the PRACTICE MODULE procedure on the basis of statutory training framework plans. After successful completion of vocational education (performance assessment), participants are issued certificates by the responsible chambers.

Quality - Flexibility - Efficiency... this is how we transform requests into work success. The company has a large fleet of numerically controlled machine tools that includes numerous turning stations with multi-axis machines, for shooting with motorized tools and milling with single-pallet/multi-pallet machines, as well as robotic islands for the mass production of turned and milled parts. The variety of tools available allows the company to process materials of all types: automatic, cemented, tempered, tempered, stainless steels (303, 304, 316, 316Ti), aluminum alloys, brass, bronze, bakelite, nylon, delrin and castings. In addition to turning and milling, complementary processes are carried out such as drilling, threading to remove chips or by rolling, boring, broaching and grinding. Heat treatments and surface finishes are entrusted to a network of specialized local partners. To optimize every phase of the production cycle, the company always keeps its quality system under control, fully and precisely ensuring the requests of its customers.

Production and sales of cold forming parts, turning and milling parts. All size ranges and part geometries. CNC single and multi-spindle

We, the company Harald cart Man precision mechanics are a medium sized company that, according to DIN EN ISO 9001:2000 certified. In the Middle Black Forest we are established and have been working for more than 30 years in the metal working industry. In our modern machinery, we manufacture small and medium series, as well as complete assemblies according to your drawings. Edit all common materials - CNC milling: CNC - Universal - Milling, up to 4/5-Achsen Machining centers up to 4/5 - axes Highest precision by 5-face machining (housing, etc.) High efficiency through multi-face machining (series production) - CNC turning: of forage machines with driven tools (Max Ø260mm) to short rotators with loading systems (max. ų80mm) for the series ranges here our spectrum - Grinding: Precision parts to be machined on IT 5 round and flat grinding machines By quality, reliability and punctuality we convince our customers who come from diverse fields such as engineering, mining, maritime, and aeronautical engineering, automotive and leisure industries. We would like to develop the best solutions for your needs with you.

RE.TT - Rehau Tool Technologie We are the toolmaking company of REHAU AG + Co. We have been active in the field of extrusion technology for many years and design and build extrusion tools for the areas of pipe, tube and profile extrusion. The products that are manufactured with our tools are used in medical technology, the furniture sector, in the automotive environment and in civil engineering and construction (pipes, window profiles). Based on decades of experience, we have excellent expertise in a wide range of applications and materials. In addition to the extrusion tools, we also build gauges for various applications. Small gauges are used to test the products made with our extrusion tools, large gauges are used in the field of injection molding. We are happy to support external partners and are open to all inquiries.

Progress Engineering and Progress Sp. z o.o. is a reputable company existing on the market for over 25 years. We have 11400m2 production space. We specialize in the automotive industry, with extensive experience and an advanced quality system. We have PN-EN ISO 3834 certificates and use quality tools such as PPAP, ISHIKAWA diagram, 8D, Pareto Lorenza, FMEA, IMDS database. We offer documentation for the approval of the production process at VDA level 2. Our PN-EN 1090 EXC-2 qualifications include the execution of welded structures. Our machine facilities include robotic welding stations, horizontal and vertical machining centers, turning machining centers, bending machines, press brakes, 2.5D, 3D a laser and powder paint shop. We cooperate with hot-dip galvanizing and galvanizing with DASt 022 certificates, which allows us to provide comprehensive service from design to finished product. Our company is ready for challenges not only in the automotive industry Our machines: 4x CNC (SAJO,MAS,OKUMA) 7x Milling Centers (MAS) 5x Turning Centers (MAS) 2x Laser Fiber 2D 1x Laser LT Combo 2.5D 2x Press Brakes 3x Hydraulic Press 10x Robots Welding (Panasonic) 1x Plastic Plotter Kimla and many more