The New Hauser Group is the holding company of the 26 currently single company with 2,195 employees and an annual turnover of 450 million euros in 2008. The activities of each company can be found in the following business areas again Textile • batching • centerwind • traveling cleaner • Transport systems (cheeses, roving bobbins, spinning cans) • suction and vacuum systems • coating and dry locations (use behind Web and knitting machines) • storage systems for bobbins • Palletiersysteme Contract production, such as • Rotating parts (pistons, bushings, washers, rings, cones, control piston, shaft, axles, hubs, pins, screws, spindles, pins, cylindrical rollers, rollers verch. Sizes, etc.) • Milled Parts • complete machine and plant construction according to customer requirements from design to Installation and Service • roller production (up to 8000 mm total length) • Locksmith • Wage measurement (modern measuring room includingPortal meter Zeiss MMZ G-25 30 20) Commercial Vehicles • Production of portal elements • Profile editing • Installation • Coating -Machine Elements • Expanding shafts • Clamping Couplings • chucks and adapters • friction and blade shafts • Shaft handling -Kompressorenbau (shipping) • Start air compressors • pressure vessel • Industrial Compressors • compressed air starter • Air-conditioning • bilge oily water separator • Biological treatment plants Environmental engineering �� Screw mills, up to 120 m³ / h • starscreens • Shovel separators • air classifier Products for the steel industry • Band edge processing facilities • rolling mills ��� conveyor systems A growing product range and increasing demands of customers from individual divisions make a steady and adequate investment readiness required for a stable and healthy growth of the company can be secured for the future. A particular interest is that in the group a technology-and innovation-friendly climate is to be promoted in the unconventional thinking and new ideas

The Lamep Srl company was founded in 2003 by two partners with proven hands-on experience in mechanical engineering, who in that same year purchased a small machine shop. Through the constant technological renewal of its machines and organisation, Lamep can respond practically and flexibly to the needs of its customers operating in various industries, mainly energy, special machinery and systems.

Sclerosing SA was founded in 1972. The company has its registered office and 4000m2 of private investments in the industrial zone of Thessaloniki. The main activities of the company are the steel trade and the heat treatment of steel workpieces. In addition, the metal cutting is like of different bolts, pins Parts offered as a finished part delivery. PRECAST DELIVERY Sclerosing SA is equipped with CNC lathes, so that the possibility of precast delivery (bolts, pins, rollers, pulleys, axles, shafts, etc.) is. For stock materials, workpieces are made on the lathe and then heat-treated to their own systems and hardened. HEAT TREATMENT OF STEEL Sclerosing SA assumes in the Lohnhärterei orders for case hardening, quenching, tempering, annealing, flame hardening, induction hardening, Nitrocarburizing at (Tenifer QPQ process). The company has Degussa salt bath, Aichelin occasion facilities and EFD Induction hardening system. STEEL TRADE Sclerosing SA has a steel ball bearing with a wide range of structural steels, hardened steels, hardened steels and tool steels (central warehouse and exclusive distributor in North Greece from Uddeholm) in round and flat dimensions.At Sägebandanlagen to Ø1200mm and 1200x1200mm breadth precise cuts from round and flat products are running. Your contact Dipl.-Ing Konstantinos Kehaghias and Dipl.-Ing. Euripides Kehaghias are German speaking and are always at your disposal.

The Glaeser Precision Turning Shop GmbH is a family-run business. It is our understanding that you as a customer of our company are also considered our partner. We solve your problems in conjunction with you. Short-term decision-making processes and flexible resetting capabilities ensure a fast implementation even of special demands. Necessary alterations we realize in short terms and without any loss of time. Adherence to delivery dates and short periods from placing the order to shipping can be taken for granted. Through the continuous enlargement of our manufacturing capabilities we grow with the challenges and tasks assigned to us by our customers. Both flexibility and reliability serve as the basis of our business policy. Decide in favour of quality! We always aim at your complete satisfaction and contentment.

NL-Maschinenbauelemente GmbH manufactures various components on 3 and 5 axis machining centers as well as turning centers.

Schapenberg Industries GmbH is an owner-managed, dynamic and internationally positioned company, based in Sprockhövel in the southern Ruhr area of Germany. Schapenberg Industries also has local presences in India and Turkey. As a holistic system supplier we see ourselves as an expert in castings (steel, ductile iron, gray iron, aluminum, investment and centrifugal casting), turned and milled parts, forgings, stamped parts and steel welding fabrications. Detailed informations you can see on our official corporate website www.schapenberg.de

We, the company “MWU”, produce high-quality CNC turned and milled parts on behalf of customers according to standard and customer drawings. The main customers of our company are from the fields of mechanical engineering, intralogistics, agricultural machinery, equipment and apparatus engineering, etc.

Unsere Betrieb ist seit 1988 tätig im Bereich Metallkonstruktionen und -wartung. Unser Hauptziel ist die maximale Qualität der Konstruktionen zu erreichen, die Einhaltung, der Lieferzeiten und mit die Verwendung unseres Wissens, die besten Lösungen und Anwendungen für jede Konstruktion zu garantieren. Wir fertigen alle Arten von mechanischen Teilen und Ersatzteilen nach Muster oder Design unserer Kunden. Unsere Werkstatt ist völlig ausgerüstet mit spezialisierten High-Tech-Geräten wie: C.N.C. Drehbänken, drei- und fünfachsigen Bearbeitungszentren aber auch mit einer breiten Palette üblicher Maschinen wie zum Beispiel (zB) : Drehmaschinen, Fräsern, Bohrern, Zahnradfräsern, Schweißgeräten. All dies in Kombination mit unseren hochqualifizierten Mitarbeitern, die ständig geschult werden, ermöglicht es uns, unser hohes Qualitätsniveau aufrechtzuerhalten und unseren Kunden die Perfektion eines vollständigen und genauen Endprodukts zu bieten. Unsere hochmodernen C.N.C. Maschinen gewährleisten die Möglichkeit, die Konstruktion zu wiederholen, sowie deren Zuverlässigkeit und Genauigkeit. Einige der von uns verwendeten Materialien sind: Stahl, Edelstahl, Gusseisen, Messing, Aluminium, Kupfer. Alle Materialien werden von einem Bauzertifikat begleitet.

Our company is since 1987 in the manufacture of special purpose machines, CNC machining, 3-D CAD / CAM milling turning, assembly of machines and components, general steel construction and welded constructions in MAG / TIG Our particular strength is in CNC milling and turning in all common materials. we offer you: - Milling - CNC Milling - 3D free-form surfaces - Form milling - Turning - CNC Turning - Assembly - Weldments

Tirometall GmbH is an innovative, dynamic mechatronics company based in the heart of Tyrol. Equipped with state-of-the-art machinery (5-axis milling and turning centers) and qualified personnel in In all areas, we are looking for long-term partnerships. We process all kinds of machinable materials and are constantly looking for new challenges. Through our large network of partner companies we can cover all surfaces relevant requirements and support our customers in the related matters. We offer:  High production competence  High solution competence  Flexibility - short reaction times, fast delivery times  Quality awareness - since 2018 certified according to ISO 9001: 2015  Prototypes co-development, small batch and series production.  Corresponding documentation, measurement records, initial sample test report, material certificates - these are our standard. In addition, we will provide you with a more detailed description of services in the annex or refer to our homepage www.tirometall.at We look forward to a good and successful cooperation with your company and are always available for further questions.

ZVIREX, Tržič, d.o.o. is a private family-owned company, which was founded in 1991 and based in Zvirče in the municipality of Tržič. In 1998 the company relocated to new commercial premises in the industrial zone at Loka near Tržič, which is today home to the company headquarters.

The MÖHLING GmbH & Co. KG is a medium-sized, metal manufacturing company with over 160 years of success story. As a specialist in cold forming, we provide our customers with customized solutions in fasteners. We manufacture cold forged parts made of round and shaped wires - such as screws, bolts, rivets, etc. for all levels Anwendungsbreiche as window construction, automotive, mechanical engineering, etc. For the production of your products made of steel, non-ferrous metals and special alloys are available via 250 cold upsetting presses with up to 6 forming stages in wire diameter range of less than 1mm to 30mm available. A Comprehensive further processing to over 200 machines makes bolts or moldings real special parts. As required, the cold heading blanks can be rotated, rolled, drilled, milled or ground. If necessary, we build special machines for special operations. Heat treatments and surface coatings can be carried out by our certified partners according to your specifications. In our daughter works "machine technology Pretzschendorf" we manufacture on CNC milling machining centers, conventional milling and drilling machines, surface and cylindrical grinding machines, machines for notching nail manufacturing, machines for tubular rivets production and mass finishing equipment for cleaning and polishing. In our factory in Haan is the production "deep drawing and punching" at home. On operating vertically eccentric and toggle presses we manufacture with a max. Table length of 1300mm and 130kN compression force. Maximum material thickness 1.5 mm. Punching maximum material thickness 4.0 mm.

We are a privately-owned company founded in 2016. The Chief Operating Officer, Ionut Luca, has many years of experience in the engineering and CNC Machining Field. Our company is pleased to offer a combined 20+ years of machining and engineering experience, which is invaluable in providing precision CNC machining. The mission of our company is to provide a manufacturing facility with the capabilities of performing custom precision machining and production component manufacture work in prototype and production quantities while offering the latest in machining and fabricating techniques. In addition to production capabilities, we also offer CAD Design services as well. We have a proud record of meeting the precision requirements for a significant list of valuable customers. Our quality is monitored through various quality processes including PPM Tracking and continual improvement methods. We would be pleased to quote your machining and fabricating requirements.

Production of hydr. and mech. Fixtures for machining centers. Production of cpl. Collet chucks, special chucks and collets. Like production of special clamping and gripping jaws, as well as special tool holders Gen. mech. Processing of type-dependent parts.

Welding Technology Center was founded in 2019 and is ISO 9000 certified. We operate modern CNC machining resources with a two-shift capacity, ensuring flexibility and competitive lead times. Our main focus is on series production, where we provide cost-efficient machining services, helping partners optimize their production costs without compromising on quality. We are open to collaborations across multiple industries – from automotive, aerospace, medical, and IT hardware to energy, industrial equipment, and agricultural machinery – aiming to build long-term partnerships based on quality, efficiency, and trust.

The Zaron precision parts Eberswalde GmbH is a company of the metalworking industry, was established in 2002 (slewing bearings through spin-off from the DRE / CON GmbH). By means of a new manufacturing process precision workpieces are individually manufactured according to the specifications and designs of our customers. This newly developed broaching method is patented and protected internationally. Our customers Our customers are mainly in the areas of safety equipment, instrumentation, tools, and electrical engineering. Furthermore, we manufacture for companies in the automotive industry and its suppliers. Toolmaking Our in-house tool is used not only for its own broaching tools and devices, but also stands our customers with appropriate capacity. Employee Zaron employs a highly motivated and qualified staff, who has many years of experience in sophisticated metalworking. Our innovative broaching method differs in many respects from the conventional spaces.The main difference is in the design of the tool. This consists of lined cutting plates, using shims gaps are created, each forming the chip chamber. All clamping stages are mounted in this way and connected by guide elements and fasteners to a stable Räumpaket. This simple geometrical construction of the cutting plates enables easy resharpening without special equipment. Precision in tooling The nuts and bolts when Zaron methods are the tools. The end product can only be a precision part, if there are already the tools. Is achieved the precision wire EDM machines. Corresponding to the finished contour of the finished part, the exact geometries of the individual cutting boards are fixed in the design and pass it directly to the machine for processing. With our procedure can be produced virtually every conceivable profile contours, regardless of whether any serrations or symmetric or asymmetric contours.The design and manufacture of the tools is carried out by highly qualified personnel on CNC EDM machines in-house. Our core business is the profiling of external contours in with the new broaching, including toolmaking. This process is in many cases an economical alternative to milling, planing and slotting of teeth and grooves or other profiles. Products: Synchronizer body: Clean the teeth and grooves in one setting. Outer diameter to 90 mm. Contours: Symmetrical or asymmetrical. Teeth Gears and toothed segments. Our services are in addition to the outdoor and indoor spaces: - Wire EDM - Surface grinding - Turning - Milling - ECM deburring

The company SC MATEC CNC TECHNIK SRL, was founded in April 2005 by Mr. Adrian Kreiner, having as main activity the production of parts for the automotive industry. The company operates in a space rented in Sibiu, based on a team of 5 employees and a processing center with numerical control. SC MATEC CNC TECHNIK SRL has as main object of activity General mechanical operations CAEN code 2562, with activities of turning, polishing, milling, reaming and welding of metal parts using machine tools with numerical control and / or conventional techniques and devices.

The Schiener company has been active in the metalworking sector since 1965. In 1995, Schiener Rudolf took over his father's workshop and founded a turning shop with CNC technology. Today, modern CNC-controlled machine tools are in use. At present, 12 employees work in our company. We offer our customers technically sophisticated and ready-to-assemble turned and milled parts, which we manufacture exactly to specification. We are increasingly focussing on 5-axis machining for series milling. Our new company headquarters in Sinich-Meran has 600 m² of floor space, where we have state-of-the-art CNC turning and milling machining centres. Renowned companies from the mechanical engineering, food and electrical industries as well as harvesting machine manufacturers rely on us as a high-performance and flexible partner. Thanks to the flexibility of our employees, the mechanical equipment of our company and the cooperation with competent partner companies, we can fulfil comprehensive work flexibly, individually and promptly and respond to the wishes of our customers. The high quality of our products is guaranteed by our DIN ISO 9001:2015-certified quality management system. We support you from the planning stage right through to on-time delivery.