Teamwork between you and us is the cornerstone of successful cooperation Are you looking for a system supplier? Talk to us when it comes to manufacturing and assembling mechanical components. Prototype construction, gauges, equipment and devices, we are also used to this precise work and can shine with the highest quality and short delivery times. If you need individual parts or small series again in the near future and are looking for a reliable system supplier for manufacturing parts, you should think of EL4TECH Fertigungstechnik GmbH. We manufacture materials such as aluminum, steel, stainless steel and plastic. For more details, please see our simplified homepage: www.el4tech.de We would be happy to discuss processing sizes for your specific request with you personally.

Since the 1960s, the Simaform company has mastered many manufacturing processes including 4 laser technologies: high-precision cutting, welding, engraving and marking, and metal 3D printing. But also wire erosion cutting (EDM), micro-milling, press shaping, heat treatment (quenching / tempering), deburring by tumbling, sanding and polishing. In addition, the Simaform design office supports and advises you at every stage of your project. Simaform is an expert in the manufacture of complex high-precision parts in fine sheet metal for all industry sectors as well as in 3D printing using metal powder. Simaform guarantees products perfectly suited to your needs with optimum quality and value to satisfy all domestic and International customers.

Mey Maschinenbau Prien has been designing, producing and optimizing precision mechanical OEM products for a wide range of industries for more than 50 years. Our team of more than 200 employees will implement your ideas at our three facilities. Our headquarters are in Prien am Chiemsee, while our other production facilities are in Nyúl and Győr in Hungary. This allows us to achieve an optimum cost mix, optimize the manufacturing of your product and pass the potential savings straight on to you. We always strive to act personally, conscientiously and flexibly, whether we are working with our clients or amongst our colleagues. These values guide our way of working and the resulting quality is reflected in your products.

Our company since its founding in 1780 to the processing of metal and has successfully specialized in the course of the last century, among other things stamping and wire bending technology. Technical possibilities Stamping:  punching machines from 40 to 400 tons of pressure  all material qualities: bright, galvanized, aluminum, brass and stainless steel, from 0.5 mm to 5 mm  plate widths from 20 mm to 450 mm  component connections in the tool (metal and plastic)  sequence editing and Follow-on composite tools  finished catching products  surface treatment Wire bending technology:  different wire bending machines  wire thicknesses of 2 mm to 10 mm  processing of bare, galvanized, stainless steel and aluminum wires  finishing operations: * Welding, chamfering, recesses, threads * Cutting, drilling, crushing, etc.  component connections (metal and plastic)  surface treatment FOX is already active internationally and seeks to improve its national and international presence and continues to edit about potential promising Neumärkte / Neubranchen intense.

We, Funke Werkzeugbau GmbH, are proud to offer you a wide range of high-quality products that are tailored to the needs of our customers. Our main focus is on the development and manufacture of punching and forming tools that ensure maximum precision and efficiency. With many years of experience in the sector, we are able to deliver tailor-made solutions that meet the specific requirements of our customers. We also offer prototyping services to help our customers turn their ideas into reality quickly and cost-effectively. Our 2D laser cutting allows us to create complex shapes and designs to cut with maximum accuracy, while our bending service ensures that your components get the desired angles and shapes. We place great value on quality and innovation and use cutting-edge technologies to ensure that our products meet the highest standards. Our dedicated team works closely with you to successfully implement your projects. At Funke Werkzeugbau GmbH, we focus on your needs, and we look forward to accompanying you on your journey as a partner.

CUTMETALL Recycling Screens Germany GmbH is a specialized manufacturing company based in Eisenhüttenstadt (Brandenburg, Germany), focusing on the processing of high-strength, wear-resistant steel plates. We manufacture complex components such as screen plates, screen baskets, and screen cassettes for industrial applications – primarily for shredders and size reduction machines. However, our manufacturing capabilities and materials expertise are also highly relevant for other industries requiring durable, precisely formed steel parts. Our core competencies at a glance: Processing of high-performance materials such as Hardox, Creusabro, and comparable wear-resistant steels CNC bending, laser cutting, welding, plate rolling, and mechanical processing of thick-walled sheets Flexible small and medium batch production based on customer drawings Decades of experience in industrial wear part manufacturing Our parts are not only used in the recycling sector but also in industries where durability and mechanical strength are critical – such as mining, materials handling, agricultural machinery, construction, and special-purpose machinery. If you’re looking for a manufacturing partner who truly understands wear-resistant steels – we’d be happy to hear from you.

This company was founded in Viernau, a village located in southern Thuringia, Germany, and it has been active in hardware manufacture ever since. We are a futureoriented company noted for our flexibility, quickness, and high quality. Our production, warehouse and administrative buildings extend over more than 4000 sqm. Our range of manufacturing includes products for the automotive, heating, building, and electrical industries.

26 years experience about Sheet Metal Stamping Tools production , Technical Manager is from Spain, of 30 years experience about sheet metal tools Manual, Progressive and Transfer tools up to 1000 tons and 4,0 mt size for more than 14 years just working for foreigner customers ,mostly from Slovenia ,Spain , Mexico ,Romania with new facility also able to produce stamping parts , prototype and serial stamping parts and deliver to EU countries , With new facility capacity and capability imcreased , Aim to get some more European customer Company people able to speak English and Spanish fleuntly .

İNOKS DEMİR SAN.VE TİC.LTD.ŞTİ. has been serving in the metal industry for 12 years. Our organization is known for excellent work, constant communication and an emphasis on customer service. Here are some details for you to get to know İNOKS DEMİR better: Founding and History İNOKS DEMİR was founded in 2012. Since our establishment, we have successfully completed numerous projects and become a major player in the industry. We pride ourselves on our history, quality and expertise. Mission and Vision Our mission is to provide services at the highest level accessible and to promote excellence in projects. Our vision is to be a company that is fast, continuous, proactive, open to change and also specified. Products and Services İNOKS DEMİR offers a wide range of products. These products include: • Furniture decoration (coffee table, table, dresser, bookcase, separator, mirror, songs), • Store equipment, • Hotel decoration products projects, • Sheet metal laser cutting, press brake bending and static powder coating works There are. In addition, we adapt all parts such as laser, cutting, bending and painting in-house and achieve successful works. Customer Experience and Satisfaction Customer satisfaction is one of the visibility of İNOKS DEMİR. We work closely with partners and strive to complete their projects on time and on budget. Positive feedback from them is the greatest motivation for us. Why Us? INOKS DEMİR has many parts from its competitors. Here's why you choose us: We are an experienced and expert team. We are committed to perfect processing and high quality. We always put the customer first. We offer competitive prices. İNOKS DEMİR is a reliable partner for your projects. With us, you can find the expertise and quality you need to sustain your projects and bring them to life. Contact us for more information and find out how we can help ensure the success of your project. İNOKS DEMİR – Serving you will make us happy"

Powerful master craftsman business in the 4th generation in Cunewalde, Saxony. With his son Robert Jeschke, the 5th generation is already in the starting blocks. Our services at a glance Punching work • Brazing • TIG welding individual production • also small quantities

We, Metallbau Schmalenbach, specialize in manufacturing a wide variety of high-quality and tasteful stainless steel and corten steel accessories. Years of experience in working with metal products, experienced know-how and the gift for exceptional design give our products uniqueness. The focus is on narrowing down to the essentials. In a charmingly flooded world, peace and relaxation are important to us. Simplicity is the goal and with it the uniqueness of our products. In addition to our wide range of products, we also offer you the opportunity to have your ideas implemented. We offer you custom-made custom-made products. You are welcome to visit us at Linienstr.14 in 42289 Wuppertal.

C. Melchers & Co. was established on January 1, 1806 in Bremen, where the global company still maintains its headquarters to this very day. In the first few decades of the company’s history, over 30 ships sailed the oceans of the world under the Melchers flag, linking the ports of Europe, America and the Pacific. In the 1860s, C. Melchers & Co set up operations in Asia, where all its trading interests swiftly moved. At the same time, with the onset of steam ships, it abandoned its own shipping business to devote itself entirely to extending its trading operations. 1866 saw the establishment of the first branch in Hong Kong, in the wake of which China began to develop into a key lynchpin for the company’s business. The ensuing decades were a period of rapid growth for Melchers in China, with over 2,000 people employed at 12 branches and plants throughout the country. The First World War proved to be a setback for business relations, although business quickly recovered. It was not until the end of the Second World War in 1945 that business came to an almost complete halt. Even so, the company continued to survive, re-opening its first branches in Hong Kong, Singapore and Kuala Lumpur in the early fifties and gradually extending its branch network across Asia. Following the opening of the Chinese markets at the end of the seventies, Melchers set up branches here again, underscoring the significance of Chinese business for the company. With the establishment of a branch in San Francisco in the early eighties, the company also started to engage in US-Asian trade so as to gain a share of the rapidly growing trading relations between these two regions. Trade with China remains a key focus of the company’s overall business, comprising as it does imports of special natural products and finished goods on the one hand and exports of plant, machinery and supplies for the Asian industry on the other. Yet, business with South East Asia has since also come to the fore, with the company amassing broad-based expertise in marketing and selling consumer goods in particular. There are special departments for each article group in Bremen as well as at the foreign branches. They work largely independently within the overall company and are staffed by highly qualified experts. Over 1,000 employees in Germany and abroad assist customers and suppliers with their specialist knowledge. Rather than being based at the company’s headquarters, most of these employees are now stationed at subsidiaries, something which in turn reflects the company’s further development and the strategic alliances which it has forged.

The TDF Steel Kft, a Hungarian-owned medium-sized business, is specialized in steel processing and manufacturing of steel structures and components for construction machinery. Our facility is located about 160 km from Budapest, easily accessible by motorway M5/M44. Our work is founded on a very strong technological basis with many years of manufacturing experience. Due to the continuous and successful marketing activities TDF Steel has established well operating business relations to a number of customers from abroad. As a result we deliver 95% of our products to the European export market. We are proud to cooperate with some of the well-known machine building companies as CNHI/FIAT, Günter Papenburg AG, Henschel Antriebstechnik, Neuson-Forest GmbH to name just a few. Our main goal has been for the last two decades to meet the requirements of our business partners by continuous technological development and improvement of the product quality. Our Quality Management System is certified according to the MSZ EN ISO9001:2015 requirements. Focusing on our outstanding manufacturing knowledge and skills, ongoing improving our quality standards, TDF Steel is a reliable business partner and supplier for the machinery industry. Our product range includes: welded constructions, machine frames, beams, arms, levers, dozer blades, housings of cast manipulators, etc. Our production performs following metal working procedures: · shot/sand blasting · flame/laser cutting of steel plates · bending/rolling of sheets · welding with protective gas both manually and robot controlled · machining as turning, milling, grinding, boring · surface painting applying ground and finish coat Please refer to the additional information about our machine capacities below. After the final quality control our products will be packaged appropriately and so are ready for the shipment to the customer. We trust TDF Steel can fulfil your expectations and soon become your reliable component supplier. Please send us your enquiry and we will be happy to answer your request or give you additional information.Metal sheet processing from 2 mm to 150 mm thickness Thermal cutting process(laser, plasma and flame cutting) Bending Welding Manufacturing Painting Assembling

We are your system partner for assemblies with components from our plastic injection shop and our stamping shop. We have a great deal of vertical integration at our location in Weinstadt near Stuttgart. Our production is optimally designed for quantities of 1 to approx. 800,000 pieces/year. We are also happy to integrate processing processes and components from our or your partners into the value stream in a process-reliable and economical way. Based on a proven approach, we offer you innovative solutions from a single source.

Since 1991, Torgelower Metallwaren GmbH has stood for quality and know-how in the field of metal processing and tool making. Based in the heart of Western Pomerania, we were able to utilize the region's underestimated potential and develop into an internationally active company. We offer our industrial customers from all over the world the highest standards in the fields of CNC punching, conventional punching, welding in all common processes, CNC milling, steel construction and product packaging. As a certified company, we were able to convince clients from the automotive industry, environmental technology, construction, apparatus engineering and electrical engineering of our quality work with punctuality and maximum precision and have been counting them among our satisfied customer base ever since. In addition to modern technology and equipment, the qualification and commitment of our employees are a central part of our company policy. The highly motivated engineers, foremen and skilled workers work as a team to meet the high demands of our customers. We ensure 100% quality of our products through targeted personnel development and consistent quality management. We offer them individual, project-oriented advice through to technical implementation. In line with your requirements, we provide you with holistic products with maximum production accuracy and consistent quality. The continuous expansion of our product range requires continuous modernization of the company's own machinery and production areas. By expanding our storage system into a modern high-bay warehouse, we can store the appropriate materials, semi-finished products and finished products on 460 pallet spaces and thus respond flexibly to our customer requirements. We responded to the increasing demands of our foundry customers with the inauguration of our steel building in 2009. The new production area of 1,200 square meters and the corresponding equipment enable us to produce and process components weighing up to 20 tons. This makes us one of the few companies in the region that can produce in these dimensions. With passion for our work and many years of experience, we take on any task in the metal sector.

Metalonica PC has been in the service of industry for more than 40 years. The main expertise of the company focuses on manufacturing and repairs of industrial parts and equipment. Industries include, steel mills, cement factories, oil refineries, paper mills, food industry and many more. The company has a variety of CNC and conventional machines varying in sizes and capabilities, including lathes, milling machines, boring machines, balancing machines and a lot more.

MARKC, Miha Mlakar s.p. is a Slovenian tooling company specializing in the development and production of high-quality stamping tools, jigs, and low to mid-volume metal parts. Founded in 2022, we quickly evolved from project management into full in-house manufacturing. Our capabilities include progressive, transfer, manual, deep drawing, and prototype tooling. We support customers from initial 3D models and engineering (including simulations and CAD design) to machining, assembly, tryouts, and final implementation into serial production lines. Our in-house equipment includes CNC milling (HAAS, TRIMILL), Wire EDM, grinding, and hydraulic press systems (tool sizes up to 1100 mm). We also collaborate closely with trusted local partners for services such as 5-axis machining, laser cutting, thermal processing, and CMM measuring. We aim to continuously grow our production capacity, with plans to expand machinery, introduce 2D laser cutting, and enlarge our production area by 2027. Located in Stari trg pri Ložu, Slovenia, MARKC is committed to precision, flexibility, and long-term partnerships.

The over 65 years making metal stampings and manufacturing washers are an important guarantee of the quality of our work. Our history is linked to a constant concern for innovation and development , both in our means of production and in the result of the flat metal stamping that we carry out. In addition to the metal stamping work, at Claudio San Martín we make metal embossments of up to 50mm , as well as precision stamping. Consult with our professionals and we will resolve any questions you have about our services.