Malkoč tehnika doo was founded on 1986. We offer turning, milling, welding, grinding services. We are equipped with classic as well as CNC machines. Our company reinvests large part of its profits in procurement of new machinery, education of its employees and improvement of technological solutions.

The Urben and Kyburz AG is a company of machining, mechanical industry. As a manufacturer of high precision components in the medium-and large-series range, the company supplies an internationally very demanding clientele. With 120 employees and a modern machine, we offer a complete, cutting, machining in medium-and large-series range. What procedures are offered? CNC turning, precision turning, hard turning, CNC milling and drilling, grinding (outside, inside, centerless, honing, polishing, lapping, center, trowallisieren), brushes and spaces. For heat treatments, we work with qualified partners. Which part dimensions we? Everything what you still need neither a magnifying glass, a crane! Expressed in figures, this means: Rotational parts: 10 mm - 250 mm in diameter and a maximum length of 600mm. Cubic parts: up to max. 200 x 250 x 300 mm What precision do we offer? Highest precision is and has always been the great strength of Urben + Kyburz AG. With highly motivated and dedicated employees and the appropriate resources, we produce daily precision parts in the micro-region of all common materials.

While you focus on your core competencies, we quietly integrate our solutions into your processes. We are a company with many years of experience in the production of molds and tools for the plastics and rubber industry. At the same time, we produce high-precision parts according to customer specifications. We are able to work on the scale of job production, batch production, as well as mass production. Our team of specialists will satisfy the needs of even the most demanding customers. Quality, precision and speed are part of our DNA. Our customers include multinational companies operating in the automotive and semiconductor industries.

ZSO sees itself as a competent supplier and service provider in the metal Zerpanung (turning, milling, grinding) and component assembly. In the area of contract manufacturing (turning, milling, grinding and surface treatment), we offer our services from small series to medium runs with great variety. Here, the annual volumes of 5,000 St. can (with high complexity, Dreh-/Frästeil 50 min processing time) vary up to 1.4 million St. (simple turned part, about 1.5 min. Processing time). The possible workpiece sizes reach the maximum diameter of 400 mm when turning. In radial grooves on the outer contour may occur reduction of the workpiece diameter. During milling, we can work with our machining centers cube sizes up to 1000 mm. We also perform desired by impermeability tests also. The company ZSO GmbH is a company of senata GmbH (www.senata.de), an owner-managed medium-sized companies with a high share of equity.

As a production partner to Original Equipment Manufacturers for more than 50 years, Optiwa B.V. (Optiwa) supplies our customers with precision mechanical parts and mechanical assemblies. Optiwa's critical success factors lies in its efficiency, design for manufacturing (DFM) support and a highly efficient production of products to tolerances in the sub-micron range. A team of skilled personnel ensures an uninterrupted production flow of products that meet specifications, quality and delivery commitments - time and time again. Optiwa is your first choice partner for series production of very accurate and complicated products at the right cost. Capabilities * Range of state-of-the-art machining centres * Turning and milling of very small parts to big parts up to 800mm * Range of robotized machines for production 24/7 (minimum supervision and lower production cost) * Sub-micron technology * Precision mechanical assemblies (vacuum cleaned, where necessary) * Series production up to thousands per annum * Controlled environment measuring department * Excellent supply base of surface and thermal treatment services * Design for manufacturing (DFM) support

At Lugal Teknik, we embrace the principle of providing reliable, innovative, and high-quality solutions to our customers. In every area we serve, we strive to maintain and continuously improve quality in: 🔧 Machinery spare parts manufacturing, 📐 Reverse engineering and design, 📦 Technical and in-direct procurement. The cornerstones of our quality policy are: Maintaining the highest level of customer satisfaction, Ensuring compliance with legal and sectoral requirements, Making a difference with advanced engineering solutions, Prioritizing efficiency, safety, and sustainability in all our processes.

We are a medium sized company and have specialized in the areas of tool and mold as well as special purpose machines, jigs and fixtures. You will find our Operational 25 km from Hannover, Neustadt a Rbg .. in the district of Basse. There you will find our experienced team of 65 employees. We offer the following services: Tool and Mould Contract manufacturing in the areas of CNC milling (3/5 axis) and turning  Product Development  Prototyping  2D/3D - Construction  Tools and forms  injection molds  Punching tools and devices  Individual production according to customer specification  Special purpose machines  machinery and equipment including construction  Installation and commissioning on site

UMI (Uitgeest Mechanische Industrie) is a high-tech machine factory with ISO 9002 certification and space travel approval. The company specialises in the manufacture of high-quality finished products, their assemblies and the associated components. Many finished products originate from the development that UMI carries out for its clients. Rapid prototyping by means of a CAD/CAM coupling is one of the advanced techniques in which UMI is proficient. UMI is partner and producer to clients in the following sectors: general mechanical engineering, space travel, consumer electronics, medicine, astronomy and the automotive industry

Die heutige DEURINGER GmbH wurde im Jahre 1989 vom Firmeninhaber Wolfgang Deuringer, als Einzelfirma gegründet. Erstprodukt: CNC-Fertigteile nach Kundenzeichnungen 1992: Beziehen des Neubaus in der Adolph-Kolping-Straße 2 1996: Erweiterungsbau - Materiallager 1997: Umbenennung in DEURINGER GmbH 1998: Erweiterungsbau und Außenanlagen 2001: Erweiterungsbau Ausbildungswerkstätte 2003: Erweiterungsbau Bürogebäude 2004: Neubau Kantine/Schulungsraum 2005: Erweiterung der Fertigung (Drahterodieren) 2007: Neubau Lagerhalle Unsere Fertigung erstreckt sich auf über 1000qm, auf der mit modernsten Maschinen hochwertige Produkte entstehen. Wir fräsen, drehen, bohren oder schleifen Einzelteile, Serienteile und komplette Baugruppen für: - Transporteinheiten - Dämpfereinheiten im Bereich Auto- und Motorsport - Elektrotechnik z.B. kpl. Lichtleiter-Verbindungen, Kühlkörper, Gehäuse, Aufbauplatten - Logistiksysteme der Zuführereinheiten, Transportsysteme - Papiermaschinen, Verpackungsmaschinen und Kartonagen - Strömungstechnik z.B. Ventile für Sonderpumpen, Verteilungssysteme für Luft und Öl, Düsen - Recyclinganlagen z.B. Kameragehäuse, Sotiereinrichtungen - chemische Anlagen, über- und Unterdruck-Einrichtungen, Verschlüsse an Gehäusen Unser Unternehmen hat sich heute als Lohnfertiger mit folgenden Fertigungsarten etabliert: CNC - Drehen, Einzel- und Serienteile CNC - Fräsen, Einzel- und Serienteile Flachschleifen und Drahterodieren Innenrund-und Außenrundschleifen Fertigung von Systembaugruppen auch mit Elektrik Härten

Manufacturer for moulds an dies in single or multi componeten systems

We are a medium sized company with about 60 employees near Ingolstadt. The company Schermer has now been around 32 years. Our production focus lies in the production of precision parts (accuracy to 0.002 mm) for mechanical engineering, the aerospace industry and the automotive industry. In addition to high-precision individual parts and small series, we also manufacture complete equipment and tools. Our machining depth ranges from conventional turning / milling about the CNC-Drehen/CNC-Fräsen to grinding (flat, indoor and outdoor round, coordinates, etc.), wire EDM and waterjet cutting. Here, our range of materials from steel and stainless steel ranges over the non-ferrous metals, brass, red brass and copper up to the light metal such as aluminum and titanium. As a partner in our small group, we have a separate material including service providers, our sister company MVI (www.mvi-metall.de), which ensure rapid deployment of most raw materials and semi-finished products.Over a network, which we, together with our suppliers, we can offer our customers a wide range of heat treatment processes and surface coatings obtained from a single source. So we are as a supplier specializing in the most common heat treatment methods such as case hardening, nitriding and vacuum hardening. Our program offers among other things a complete machining in the field of manufacturing parts by: lathe parts, pistons, bushings, washers, rings, valve seat, coil, cone, spool, pipes, sleeves, shafts, axles, hubs, spool, spring plate, pin, roller, roller , bolts, screws nozzles, grinding mandrels, sizing, spindle, aperture, mandrels, lid, insert flange. In addition to our machining capabilities, we offer our customers even complete assemblies such as measuring devices, test equipment, gauges and mounting devices.

EPM & construction machinery KG was founded in 1995 as a technical office of Peter Plien. In the beginning created designs for special grinding and deburring. Since the orders were becoming more extensive, we expanded the company after two years at 100% design capacity. During this time, sawmill machines and their operation and funding designed projects directed and accompanied montages. Our field of activity also expanded in the fields of precision engineering, measurement and testing. In 1999 the company moved to new premises, in addition to our technical office there was our mechanical workshop. Now we can start with the production of our self-developed machines, so at the beginning special machines developed according to customer needs. A conventional machinery for drilling, turning and milling was original equipment. In 2001, we expanded our production facilities to CNC machines in order to better meet the needs of our customers. Since 2002 we have been nurturing emerging from the profession of industrial mechanic in precision. In the future, EPM construction & machinery KG should be increased by a further field of activity: EPM-RACING. Main feature of this new department will be the production of RC-CAR-tuning parts and internal combustion engines. The development, design and production of prototypes of various kinds is our strength; reputable companies from different sectors, such as John Deere, Actemium - Vinci and L'Orange rely on our tailored exactly to your needs solutions. Area measurement, inspection and assembly Combined measurement testing and assembly places for fine mechanics and hydraulics Combined measurement testing and assembly systems for vehicle transmissions and clutches Combined measuring equipment for testing and assembly hydraulic control blocks Design of individual workstations with screwing High pressure leak test up to 4200 bar hydraulic Leak test for oil pans, gear cover and the like Handling area Loading of presses Development and construction of special grippers for handling and portal robot loads of up to 120kg Field assembly and disassembly Special assembling machines for bearings and bushings Special machines for dismantling of valve seat inserts in cylinder heads Screwdrivers - handling up to 4000 Nm torque The field of packaging Salt tablets in aluminum foil packaging Hygiene products packaging Field component manufacturing CNC

We are an innovative and powerful companies in the metalworking industry, which successfully presented by flexibility, high quality and manufacturing standards for several years on the market. With an efficient and equipped with CNC technology, modern machinery, we manufacture items, sample parts, small and medium series in all standard and special materials. With over 35 years of experience in mechanical engineering and metal working, we are now even to realize highly complex manufacturing tasks is able to provide our customers requirements to meet.

PRECISE CNC MACHINING AND SINGLE/LOW SERIAL/PROTOTYPE/SPARE PART PRODUCTION IN SHORT DELIVERY TIME - EXPRESS POSSIBILITY FOR PART DEVELOPMENT IN SOLIDWORKS OR CATIA V5 WITH OUR DESIGNERS. DESIGN AND PRODUCTION OF INJECTION MOULDS AND PROGRESSIVE STAMPING TOOLS (max. dimension 2000 x 800 x 800 mm , up to 5 500 kgs EDM WIRE CUTTING + DIE SINKING + GRAPHIT ELECTRODE PRODUCTION 3D milling ( max dimension 1650 x 810 x 810 mm , max weight up to 1750 kg) MECHANICAL parts of high precision ( steel, tool steels , aluminium alloys, ampco, hardened materials , nitrided , coated ( TiAlN, TiN etc. ) Machining of exact mechanic parts made of HARDMETALL ( tungsten ) by means of electric discharge machining ( wire-cutting, sinkerrossion, grinding) Spare parts ( stamping tools , dies, active parts of forming machines and tools ( stamps, dies, inclusive coating TiCN, nitridation tec.)

Osthoff precision mechanics deals with the production of mechanical components made of ferrous and non-ferrous metals including hot or surface treatment. With modern machinery we can process in one setting when producing complex qubischen and rotationally symmetrical components five or more pages. The advantages are shorter lead times, precise positional tolerances, no re-clamping and a better quality / price ratio. 1980 Company founded by toolmaker and master mechanic Horst Osthoff. Repair and rebuilding of HSS and solid carbide special tools. Parallel conventional production of turned parts for the tool. Mid-80s conversion of the machinery on ground-controlled machine tools, CNC milling and manufacturing focus. 1986 Development of a universal multi-position measuring system, in particular for use in rotationally symmetrical parts. This measuring system is trademark protected. 1995 Development of a device for the removal of Abstechbutzen of turned parts, with subsequent patenting in Germany and in the USA. Since then, complete machining of mechanical components made of ferrous and non-ferrous metals, including hot and surface treatment. Primarily production of small series with numbers from 5 to 200 pieces, but also series of up to several 100 parts. 2001 Introduction of a quality management system certification, the company according to DIN EN ISO 9001/2008. The customer base is located in the mechanical and automotive engineering. Own developments: * Butzenentferner * Universal multi-point measurement technology

We are geared towards plant, fixture and special machine construction - from the drawing part to the PLC-controlled robot system - and offer first-class service over the entire product life cycle. We also implement time-critical projects flexibly and reliably and contribute our extensive know-how to planning and implementation. From the first feasibility studies to wear part management for ongoing operations - everything from a single source. In our company, a competent and experienced team focuses on innovation, quality and continuity. We realize your ideas • Project planning and engineering • construction • Special mechanical engineering • Commissioning and training • Maintenance and repair work Our customers include international corporations as well as small and medium-sized companies from various industries such as the automotive and supplier industries, light bulb manufacturers, cosmetics and food industries and many more.

Kristen & Zahalka was founded in 1955 by Adolf Zahalka and Helmut Kristen as mold-operation. Over the years, the small 2-man company has developed into a flexible family business with reliable employees, seven injection molding machines and a punching.