h3> For over 80 years we have experience with precision springs, wire and strip bending parts. This is what makes us learn. /h3> Since there are many possible applications for our products include nearly every industry to our customers. We process all common spring materials and special materials. Our extensive stock in the materials, short procurement channels and ensure efficient production for short-term availability. State of the art machinery, flawless materials, own tool manufacturing, qualified staff and stringent quality control ensure you that our springs deliver what they promise. Custom engravings, careful explanations, and above all flexible delivery times are our strengths that pay off for you. h3> So be demanding and challenge us. We are delighted! /h3>

Leading Italian company in the field of design and manufacturing of injection moulds as well as development of process solutions for the automotive sector. Our specialization is in the field of complex 1K moulds as well as multicomponent injection moulds with different technologies (core back system, rotational tools, index tools, vertical rotation, transfer tools - pick and place - and coreside lateral shift). With our 2K and 3K injection moulds we can also supply auxiliary injection units for the production of multicomponent parts by using a conventional 1K injection machine. Our injection moulds are applied both in the interior as well as in the exterior of the car. Our product portfolio is completed with the supply of a diverse range of industrial automations, such as end-of-arm grippers, machines for sprue cutting, cartesian robots, equipment for quality control, pressure check and assembly, robotized cells, equipment for film wrapping, gauges, laser cutting stations and others. Our purpose is to be a system supplier for turn-key solutions to our customers.

Since 1972 specialist in injection moulding of high precision plastic technical parts Starting from a little workshop, Rosà Plast is today a solid family company at the second generation, specialized in injection moulding, ready for the future challenges and to assure high precision and reliability in the production of plastic parts. Rosà Plast is located in North-East of Italy , 80 km from Venice area. 42 injection moulding machines of best trademarks, controlled by a full computerized production process and a systematic quality control assured by ISO 9001:2015 and UL QMMY2 certifications of third party. Rosà Plast supports the customer from initial phases of project and co-design , gets the most efficient solution starting from specific requests and solves problems related to existing tools thanks to a individual analysis .

Our company was established in 1997, in the field of metal processing. Since then, it adopts a quality agreement that has successfully delivered hundreds of thousands of parts for testing. It has closely teamed up with the developing metal processing technologies and made the necessary investments. It has produced precision equipment such as engine parts, machine parts, molds and fixtures directly for many main industrial enterprises. Our main references are; -Iveco Motor Company (ITALY) -Toyota Factory (Türkiye) -AISIN A.Ş (Türkiye) -Basak Traktor A.Ş (Türkiye) -DEMİSAŞ (Türkiye) -Turk Traktor AS. (Türkiye)

We are an owner-managed, medium-sized company in the tool and mold making sector. The family business has been based in the Höxter district in East Westphalia since 1961 - in the three-country corner: North Rhine-Westphalia, Hesse and Lower Saxony. Our many years of experience in the field of tool design and production make us - a team of young and dynamic employees - a competent partner for our customers. Cooperation and Innovation: The employees are the most important element in our endeavors to look after customers at a high level, to develop and implement solutions. Personal interaction and cooperation are characterized by appreciation, recognition, team spirit and mutual respect. Communication is open and constructive. Every employee feels responsible for the entire company and is called upon to make innovative suggestions for improvement to ensure that the existing procedures and processes are optimal. So everyone contributes to the overall success of the company.

ELESTRA d.o.o. is company with a 40-year tradition in manufacturing. We provide integral high quality solutions in design, development, production and assembly of injection products and metal processing. We have established our own toolshop 30 years ago to support the development of our products and now offer its services to our customers. We produce plastic injection and die cast molds, sheet metal processing and other tools for our own as well as our customer's needs. We also produce custom assemblies and automatic systems for product assembly. The toolshop is equipped with a complete machine park for mold production and is comitted to speed and quality. We also offer prototype and small to medium series production of various parts on all our machines, as well as assembly of precision mechanical assemblies. We are a tier 1 and tier 2 supplier for companies in the defense sector - our products include structural parts of aluminum and various mechanical subassemblies. This includes also the required surface treatment of the parts (anodizing, chromating, nitrocarburizing, manganese phosphating, nickel plating etc.) and painting. Our goal is to establish long-lasting relationship with our customers, based on excellence of our service. This involves constant evolution of our processes, equipment and know-how.

We manufacture machines, machine parts and spare parts. Repair and maintain your existing systems and carry out revisions by. Through the use of CNC technology we achieve a high dimensional accuracy in the field of spare parts. Challenges are discussed partly on site with the customer, so that together fast and optimal solutions are found for difficult problems and tightest deadlines. Activities Projects Manufacturing of delivery devices for a glass building operation Manufacture of heat exchanger components with high quality standards Design, construction and installation of an extra-wide canopy New development and manufacture of an apparatus for inserting dowel pins in a polyamide / steel composite system Revise of milling heads for the wood manufacturing industry Design, planning and construction of a new Entaschungssystems for

We specialize in the manufacture of complex components of the tooling and engineering, typically in the lot size "one" and even small lots & prototypes. We are equipped with machinery that covers the entire process chain of such components. From the pre-and soft processing, about the hardships in the area of the tool and machine typical types of steel, extends to the finish in air-conditioned rooms, our machinery. Machining Centers / Drilling / milling from DMG / DMU and Hermle, Roeder HSC milling, turning / lathe Mori Seiki and Okuma, grinders grinding / Jig Grinding by Hauser, Kellenberger, and the young and the EDM / DEM Wire EDM / EDM SEM from AgieCharmilles and OPS / Ingersoll are installed by us. With 170 machine operators and 120 machines we make about 450,000 per year production hours. We manufacture plates, frames, stamp guide plates, molded frames, moldings, 3D-shaped parts, guide plates, stripper, stripper plates and precision parts such as stamps, molds up to a size of 2000 x 1700, 3D parts up to 1700 x 1400, turned parts up to diameter 650 x 1000 In-house hardening, coatings (PVD, TiN, TiCN, CrN, WCC) in cooperation. The materials we specialize in tool steels, high alloy steels (1.2379, 1.2343 ESR, 1.2344, 1.2311, 1.2312, 1.3343, Divar) powder metallurgy steels, PM steels (CPM, ASP, Vanadis VAN, REX, Hotvar) as well as hard metal carbide ( G10, G20, G30, K10, K20, K40, H40S).

We are a small family manufacturing company that has specialized in the realization of any claims or demands of our clients in the field of mechanical engineering. Our core business is Cnc milling and we can offer you milling range up to 1250x600x650.(5 machines) Production site is located in Samobor, CROATIA near capital Zagreb,2 km form highways A1,A3,A4. Offer: -Milling -Form milling -Engraver milling -Spark erosion wire cutting -Spark erosion and Etching -Injection moulding -Stamped and sheet metal formed parts

The HEMA + Mould Plastics Processing GmbH was founded in October 1990 in doubt Bach / Thuringia. Our services include mold of injection molding and die casting molds and the production of technical injection molded parts. In 2006 we moved into a new building in Jena. We have a state of the art mold including own design. There are 8 injection molding machines Arburg available. Clamping forces from 250 kN to 3000 KN

Werkzeugbau Wörgartner GmbH was founded in 2005 by managing director Peter Wörgartner. Since its founding, the company, as well as its machinery, have been constantly growing. Through close and in-house cooperation with Wörgartner Produktions GmbH, expertise and many years of experience with punching and sequencing tools are combined in particular. This makes it possible to achieve targeted results of the highest quality in record time. Werkzeugbau Wörgartner GmbH uses a large part of its capacities to produce spare parts for its customers. Numerous wire eroding machines, as well as profile grinding machines and flat grinding machines, are available for this work. In addition, there are not only a few 3-axis milling machines and a 5-axis milling machine with pallet changer, but also 3 5-axis HSC milling machines, specifically for processing hardened materials and also hard metal. However, Werkzeugbau Wörgartner GmbH not only supports you in the production of contract tools or spare parts, it also provides you with expert advice from the entire design department. Many years of experience in this area have already led to lasting partnerships in many areas and projects. So if you are looking for a partner who will support you in all areas of toolmaking technology, from planning to the finished part, then contact Werkzeugbau Wörgartner GmbH.

Production of hydr. and mech. Fixtures for machining centers. Production of cpl. Collet chucks, special chucks and collets. Like production of special clamping and gripping jaws, as well as special tool holders Gen. mech. Processing of type-dependent parts.

KWM WEISSHAAR Sheet metal process chain As a leading, modern and innovative companies in the metal and sheet metal processing, we are a team of over 500 employees in more than 30 years, a respected partner of many well-known customers. We supply almost all significant industries, such as the printing press, the automobile industry, the rail vehicle or general engineering. With our five fields of engineering, sheet metal processing, joining and welding, assembly and logistics, we are across the entire process chain of sheet metal processing across the all-rounder and problem solvers when it comes to sheet metal. Engineering The Engineering Division is divided into the areas of order processing center, design, prototyping (experimental / prototype) as well as tool and fixture. Sheet metal processing KWM WEISSHAAR disclosed as part of the machinery, the entire bandwidth, which requires a modern sheet metal work systematically from. Add & Welding Laser welding Robot welding / linear welding Bolzen-/Punktschweißen Manual welding Stick Rivet Assembly Refrigeration and air conditioning equipment installation Major Appliances Installation Electrical installation Surface Technology Others Logistics The objective of the logistics area is an optimum supply of production and our customers. Business With our five divisions, we are across the entire process chain of sheet metal processing across the all-rounder and problem solvers when it comes to sheet metal. This alignment is one of the reasons for its continued growth. In addition, a consistent customer focus and courage, very early to decide on the use of new technologies. This is always the customer benefits, which is expressed by time, quality and cost benefits. A recipe for success of the company is certainly also the successful approach to every customer by a project manager.The customer has the motto "One face to the customer" always the same contact person. Founded in 1979, today has over 500 employees of the largest suppliers in the field of sheet metal forming and processing. KWM WEISSHAAR produced with advanced machinery and equipment as well as a professionally well qualified and motivated staff. The product range of the business unit "sheet metal processing" includes high-quality products for almost all industries. The business was founded in 1997 "Design & Development" also offers advice and support of the idea through the design, construction, tool development and prototyping to series production. Sheet metal working "under one roof" is our understanding of professional service and partnership. What we stand for \ We offer our customers the best possible solutions in terms of production processes and methods. \ We cater to the individual needs of our customers. Thanks to the proactive thinking and action, we are helping to improve products and reduce costs. \ We offer our customers as partners in a relationship products and services at competitive prices. With our know-how and flexibility, we will fully meet the high quality requirements of our customers. \ Through our ideas for the realization of tasks, hard and effective work as well as high reliability, we win the trust of our customers.

With over 50 years of experience in the field of metalworking, we manufacture complex components on the most modern 5-axis machining centers and CNC surface / profile grinding machines with the highest precision. For small to medium-sized lot sizes, prototypes as well as individual parts and fixtures, our modern march park offers a high degree of flexibility. Motivated and well-trained employees guarantee a consistently high quality of your production parts. Our long-standing customers from mechanical engineering, among others, appreciate our quality, reliability and flexibility.

MAGXYARMET is a well-known European supplier of ready-machined castings, which find their application in various engineering branches. The company has been producing high value alloy steel products since its foundation in 1981 and is nowadays the leading Hungarian investment foundry. During the past decades the technology has been steadily improved and automated, the castings and components are produced mainly in small and medium sized series. MAGYARMET unites the accurate lost wax technology with a wide variety of materials: low-alloy steels, high-alloy steels (corrosion- and heat-resistant, dupley), war-resistant alloys, Nicke- and Cobalt-based alloys, bronze. Our technology enables the production of castings weighing between 0,050 and 45 kg. The products of MAGYARMET are used in pumps and valves, instrumentation, food stuff processing, general and chemical engineering, petrochemistry, filtration and packaging equipment, automotive industry and other vehicles, medical equipments, big engine production, process and general engineering, construction etc.The bigger part of our products, approximately 75%, is exported to Germany, Switzerland, Great Britain, Austria, Spain, France, Finland, Denmark, Sweden, Italy and the Netherlands. The continuous development and the aim to satisfy the demands of various markets led MAGYARMET to start rapid prototyping. This technology joins together the high-tech laser printing technology and the exceptional development of MAGYARMET during several decades in precision investment casting. Rapid prototyping based on 3D printing makes it possible for customers to get the required part machined and ready-to-assemble within two weeks. MAGYARMET offers full service and ready-to-assemble parts. Our machining shop currently has more than 20 CNC turning and milling machines, NC controlled key-seating machine and other conventional machines at service. For further information, please, visit our website: www.magyarmet.com

We are a stable, Austrian contract manufacturer and convince by our ability and our performance in the area of starting hole and wire erosion. Our customers in the global environment especially appreciate our flexibility, short lead times and our expertise in difficult jobs. 12 pcs water and wire EDM 3 pcs CNC-Hole EDM machines are disposal. Wire EDM small parts - Micro parts (thin wire processing) Wire cutting by oversized workpieces up to 500 mm height Konik 50 ° per side to height 500 mm Hole EDM of micro bores from Ø 0.25 mm Hole EDM oversized workpieces up to 500 mm height

We work with the latest CNC machines 2 1/2 D Milling Items Series parts Prototypes Bugruppenfertigung

We are the leading European manufacturer in the Packaging industry, with factory located in Pliska, Bulgaria (45 km. from Black sea). We offer solutions in Turning parts - series and single; / Milling parts - series and single; / Grinding - cylindrical and flat, EDM - wire and sinker. Design, custom manufacture and repair of Tooling and Machining such as Injection molds and Dies. We are interested in longterm partnerships with West-European companies. We offer you the best price, short possible leading times and personal attention. Our industries of preference: Automotive, Automobil, Nutzfahrzeuge, Non-Automotive, Packaging, Verpackung, Pneumatic, Pneumatik Industrie, Hydraulic, Hydraulik Industrie TIHERT is part of the group HERTI -group.