The philosophy of FES = Foundry Engineering Service is innovative by the terms, technology and optimized with the market characterized. Thus FES adds new technologies into production, provides new technological developments in the production process and is constantly developing its own innovative products, which are the worldwide trends and market demands of the foundry industry requirements. The production of low-floor hochexotermer feeder sleeves, highly exothermic-insulating caps, breaker cores and Williams cores, which have a high strength, one of the strengths of FES. The success is the philosophy of FES right. Within a short time FES developed by a partner for German foundries, towards the partner for international companies, among others, from Finland, France, Austria, Poland, Switzerland, Turkey, Hungary. Close and selective cooperation of business research and development, production, purchase, sale and management enables FES flexible, effective and quality to meet the requirements of customers. Products The products created by FES optimize a particularly economical manner the casting process, improve casting quality and reduce the reject rate. Highly exothermic feeder sleeves * Highly exothermic reaction * Quickly igniting * High strength Highly exothermic-insulating caps * Highly exothermic reaction * Quickly igniting * High strength * With or without Williams bar Williams cores * Exothermic reaction * High strength Breaker cores * The production of breaker cores, which is also part represent in combination with the corresponding feeder sleeves cost-saving and effective feeder systems to the specialties of FES.

Manufacturing competencies Assembling • Electromechanical assembly • Mechanical assembly Drilling/boring • Drilling / threading / tapping Milling • Form milling (3 D) • Surface milling (2 1/2 D) Mould making • Mould replacement / wearing part manufacturing • Pattern / model making Turning • Turning

Besides the construction of test and production equipment, the company Sigel plant GmbH also offers pure mechanical services. In our modern production machines, we produce only prototypes but also small series up to a lot size of 500 pieces.

Our company was founded in 2004 and has since been in a strong growth phase. This is thanks to the efficient interaction of many years of experience in the development and design of technical articles on the one side and the rich experience in the field of tool making for plastic injection products on the other side We are a multinational company (German-Serb) and provide our customers in the European market, a detailed service program from design to production. According to our company philosophy, we try as a young and experienced company to always be our claim with respect to training, quality development and use of the latest technology needs.

For over 25 years the company develops and manufactures mold Stadler GmbH sophisticated precision injection molds for the automotive, leisure, and packaging industries. Our highly qualified team of employees, the most modern machines available, which allow Easily forms up to 15 tons to produce. With us, you get everything from one source. Starting with the support of product development and design, to the finished shape. Quality is our top priority, our customers appreciate it and reward us by a long-term cooperation. Our staff team is optimally adapted to highly motivated and meet the highest requirements.

We, the Skrotzky GmbH, a company in the area mold and tool, whose team has many years of extensive experience of the planning and organization of the design to the manual and mechanical production of investment castings and injection molds has. In the field of plastics technology, we manufacture products for various industries, especially for demanding areas such as automotive, medical and electrical engineering. Our product range includes high-quality components - among other visible parts, highly polished parts and white parts. These plastic parts can we printed by pad printing, assembly, etc., are supplied in small and large series. We address the ever-increasing demands through constant training of our professional staff, advanced computer and machine technology to deliver impeccable quality products. This proves the certification since 2002 by TÜV Rheinland Cert GmbH, in accordance with DIN EN ISO 9001:2000. If you have any supply shortages caused by your supplier - we'll help you out! By flexibility, we are able to quickly realize new orders and fulfill your wishes. Its great advantage in working with us is that you get everything from one source: - Development, design, mold making, plastic molding and final assembly We appreciate your interest in working with us. We are happy to arrange an appointment for a personal interview with you. Visit for more information visit our web site at: www.skrotzky.de.

Meccanica Generale is an advanced mold maker with big expertise and long experience in the fields of mould design and construction in the automotive sectors (door panels, carriers, intake manifold, pillars, underhood components, lighting) technical products (also 2k), material handling, domestic appliances, medical devices and we are currently handling some very interesting projects in the aerospace sector (injection molding, with component overmolded, and vibration welding technology involved, with peek material). In addition to the capabilities of a traditional moldmaker, we have an internal R&D department to support our partners, when requested, in product design, feasibility and mouldability evaluation and moldflow analysis, to optimse too, coolinl and, in the end, cycle time.

Founded in 1989 thanks to the brothers Luigino and Sante Cippitelli, Italmetal specializes at first only in the production of buckles and metal accessories for leather goods, quickly establishing itself as an important supplier for several national and international companies. Parallel to the production of accessories for leather goods, the company gives life to a technical department of design and development CAD-CAM for prototypes and moulds in steel, reaching important positions also in the production of technical details in zamak, in particular for the industry of furniture, automation and accessories. Currently the company, spread over a covered area of 5,000 square meters and with a workforce of 40 employees, is able to provide a complete service that goes from the study of the product up to the production of the same, passing through all the phases of the process work, which are carried out almost completely within the company itself. The types of processes that Italmetal can offer are almost exclusively addressed to the injection moulding sector. The two main production sectors are: Design and production of injection moulds for zamak and plastic materials. In the various phases that constitute the birth of an egg produced, the realization of the mould represents a crucial moment that will influence all the subsequent production phases of the product. The Molds department designs and manufactures moulds both for third parties and for internal needs. The department consists of a technical office that analyzes and studies the equipment commissioned to verify the times and technical specifications, and a modern workshop that follows all the construction phases. Together with the Stamping department, it carries out the testing of the equipment made up to the final set-up. Zamak moulding. The Stamping department, in addition to testing the equipment produced by the moulds department, takes care of the moulding and all the subsequent processing steps to which the parts are submitted before delivery. The technologies used in the department are two, by die-casting and by centrifugal moulding. Die-casting is used for the production of parts with high runs and for the production of technical parts with reduced dimensional tolerances, the centrifugal moulding is used for the realization of medium / small series and "pilot" parts. In almost 30 years of activity in the field of accessories production, the company has gained experience and expertise in the matter to be able, for each new project, to define with accuracy and safety the problems that may occur in the various production processes and consequently, advise the customer on the most suitable solutions to simplify or prevent these problems. Our strong point is this, a deep knowledge of the problems related to the development of new products, supported by years of experience and the use of the latest technology, which allow us to solve technical problems before the launch of the order and update our customers in real time already in the pre-industrialization phase of the product.

RUCO - The ideas company Creativity - made in Germany - is our strength. RUCO is a German family-run manufacturing enterprise with more than 30 years of experience that is famous for its innovative and practical household, home living, kitchen, bathroom and garden products. We develop intelligent and high quality solutions that help to simplify and organise people's everyday lives. So why not try us out?

In techpilot we offer you the products of BMY which is the best aftermarket connecting rod manufacturer. Having proven itself in the international automotive spare parts market, especially in the production of connecting rods of light commer- cial and passenger vehicles, BMY is a supplier to the world's leading automotive companies. Quality products, reassuring sales and after-sales services, product variety, fast shipping, 100,000 km engine warranty are among the most important reasons for choosing BMY products. Today, as BMY, we are experiencing the happi- ness of this trust and preference. We continue to grow by sharing our happiness, trust and earnings with our suppliers, customers and employees. You can always contact BMY about our company and our products in this catalogue. We would like to express our deepest gratitude to you for your interest. Together to many great happiness and success ... BMY Family

Toolmaking With more than forty years of experience, we know what is important! The best tool can only achieve the desired success if it has proven itself in practice and if important relationships from the field of manufacturing technology are taken into account during planning and construction. Process reliability, precision and service life are just a few of the essential properties that our tools meet. We offer you our competence from tool development to tool design and manufacture to maintenance and preventive maintenance. For production, we have the equipment and the network to offer you all the necessary manufacturing processes.

Our core business is design and manufacturing of injection moulds for pallets, bulk bins, waste containers, crates and medium-to-large parts for other applications. Here you can watch our company video: https://youtu.be/MVRRBtNxbj8 Highlights of our company: -since 1982, more than 2000 moulds built for products weighing from 500 grs up to 40 kgs -100% production in our two plants in Jesi -Customers from 35 countries all over the world -High flexibility and easy communication thanks to a lean structure -Product design, injection moulding analyses, reverse engineering, prototype moulds ecc. -Trials in our factory on machines from 750 T to 4800 T -Assistance during start-up at your site -Service and repair, also at your site, also on moulds built by other moldmakers

Ranieri is an Italian company certified ISO9001:2015, a sub supplier specialized in the production of industrial rollers: conveyor rollers, rubber rollers and cylinders. Our partners operate in different sectors such as the paper industry, earth moving machines, agriculture, wood and other industrial machines which need rollers upon technical drawing that reach diameter Ø520mm and length 3.150mm.

We are a precision steel processing company. Thanks to modern technologies, we are able to help you cut costs with the best quality of your product. Please feel free to contact us with any job, we'll do our best to make for you the best offer.

The company has been pursuing the goal of being the best since its establishment in 1975. 2021 27 employees 17 plastic injection molding machines 6 ultrasonic welding machines 5 million euros of annual turnover 46 years of tradition

mechanical engineering Plant construction and process engineering CNC machining center Development and construction offices Industrial maintenance (assembly, repairs, maintenance)

Made-to-measure plastic containers

tmp-machining is a young, flexible and very committed company with the aim of meeting or even exceeding your customer requirements. The focus here is on the quality and timely processing of your orders. The short communication channels and the associated fast response times are among our core competencies.