Industrial service provider with a focus on mechanical and electromechanical components and devices. Thin sheet metal laser cutting, punching, finishing, lathe, mill.

Higher Accuracy In Less Time! To meet this standard we have at our disposal a variety of most modern manufacturing systems with integrated automation modules and measuring equipment . Our flexibel shift system enables high productivity in every domain. We are your service company in every interest of plastic parts, mold making (plastic, zinc die cast, MIM), hydroforming, grafite and copper electrodes as well as serial part milling. We take responsibility for your entire project, but offer also subtasks of your project. We are ready for you - test us!

Iron FT is an Engineering and Production company

Fuchs GmbH & Co. KG Plastic parts Mould Assembly

BR.AL.CO S.A was established in 1975 when it first started, the company was involved in mould constructions. Today, BR.AL.CO is involved in pressure die casting and trading in accessories made of aluminium, brass, Zamac, in mould constructions and providing other services such as electrostatic painting, finishing, sand blasting, etc. Its facilities are located in the Industrial Area of Thessaloniki the privately owned property of 4.850 m2 The factory has fully organized toolroom, foundry, processing, electrostatic painting, quality control, montage, packaging and storage areas, ensures the production of high standard, quality products. Management and senior staff enthusiasm for their work, experienced and fully trained personnel, use of very modern equipment, implementation of quality systems with ISO 9001:2008 and ISO 14001:2004 certification, production of high quality products and consistency in the services provided to its customers have established BR.AL.CO as one of the top and most reliable companies in its line of business in Greece.

Towards the introduction of a new product, it is necessary that after the development of the concept prototypes are available to different testing and analysis. The RAPID PROTOTYPING PROCESS Applied in home Hagmann is the fast and accurate way to prepare for a draft design, models and functional parts. Convince yourself of our performance and give us a call. Our team is at your disposal. ... Was founded in March 1996, and has specialized in the production of technically sophisticated model and prototype plastic parts. Using the method of "rapid prototyping" and to distinctive knowhow of customers and confidence in us is growing steadily. Quality and reliability are the best proof for Hagmann prototypes.

Since its founding in 1994, DRT has been a reference as a toolmaker for injection molds for plastic up to 25 tons. Due to our main focus on the automotive industry, DRT meets all industry standards and requirements and is therefore the ideal partner for developing and manufacturing a high-quality end product.

Injection and blow moulding plastic parts Metal machining

Founding year: 1948 Takeover by FA.Liutek in May 2023 Employees: 15 skilled workers Certified according to DIN-ISO 9001:2015 Division: Tool and mold making

Precision metalworking company with mold construction for both plastic injection and aluminum die casting. We also design and manufacture molds and spare parts for refractory pressing.

Logtekna provides services of precision machining and manufacturing. As an experienced machining company, we aim to serve our customers in different sectors by providing expert CNC, 2D and 3D machining services. Our 10 years of experience in custom machine parts is your guarantee of quality and reliability. We exceed our customers expectations by providing timely delivery and competitive pricing. We are a company knowledge driven and aiming for a 4.0 industry future of manufacturing, our cient's online plataform with instant reports, photos and relevant documents of the ongoing jobs, is one of many advantages you have working with us.

We specialized in aluminum Kippgießteile their specialized piece weights in the range of approximately 10 g are up to 100 kg. The large volume Kippgießteile with dimensions up to 1.5 m in length are manufactured in Germany. The wage-intensive products are manufactured at competitive prices in our new plant in Hungary. A variety of products we supply finished in all common remelting and hut alloys. For years we have been supplying reputable clients in the areas of the vehicle, drive line, machine and plant construction. Likewise, we manufacture manufacturer of electric motors, awnings, exterior lighting and industrial scales. This is mostly to various gear housing or drive housing and motor flanges, cover and cylinder with high technical requirements. The unit weights of these products are in the range of about 1 to 100 empty kg, we have specialized in large-volume Kippgießteile. A variety of products we supply finished in all common remelting and metallurgical alloys.Cast parts are eg. Base frame, housing, brackets, base, magnetic enclosure, equipment rack. Our special services: 1 Construction services as early coordination with our partners to achieve a technically and economically favorable solution for the casting and the casting die. 2 Foundry Technical consulting for the development of new castings on initial samples to mass production. Advising on necessary technical changes to the article. 3 Electronic monitoring and control of casting machines to ensure that our clients want quality. 4 Delivery of castings and heat treated if necessary and machined Aluminum alloys The melt is continuously monitored with existing spectrum analyzer (Spectrometer). Molded be the most common alloys, both in remelting and in cabin quality. The following alloys are in use in our: Alloy designation to DIN EN 1706 numerically chemical symbols EN AC-21100 - EN AC-Al Cu4Ti EN AC-42100 - EN AC-Al Si7Mg0, 3 EN AC-43300 - EN AC-Al Si9Mg EN AC-44000 - EN AC-Al Si11 EN AC-44200 - EN AC-Al Si12 EN AC-46200 - EN AC-AlSi8Cu3 EN AC-47000 - EN AC-Al Si12 (Cu)

We are specialized for the tool construction of depth tools within the range packaging machines. In addition count beside format tools also stamping machines, perforations and feeding of tablets. By the CNC Fertigungskapazität we manufacture in the meantime also milled pieces. The materials which can be worked on are aluminum, steel, V2A, as well as thermal and thermosetting polymers. The lot sizes are enough from 1 to 5000 pieces or more highly.

Precision that arrives Himself to the production and continuous control of precision parts we a lot of attention. Finally, we want only proper Deliver the components to make this an impeccable operation guarantee. Because quality made by Koestler's quality, can be trusted at all times. Promised Tool and mold for wide variety of applications We manufacture extrusion blow molding for: * The item production in the automotive industry * Components and Modules of Cell Phones * And other wide range of applications And parts production, small-and Mass production 3-axis, aluminum, steel / Cast steel and hard machining

METAL PARTS MANUFACTURING - TOOL MAKING - CNC MILLING - CNC TURNING - WIRE EDM - DEVICE CONSTRUCTION - ROBOT WELDING

MTC Group is located in Fabriano, Italy and is composed by 2 business divisions: MTC for sheeht metal stamping dies and ARA for welding and automation systems in the automotive and home appliances sectors. MTC (ww.m-centro.it ) designs and manufactures progressive and transfer dies up to 5 m length and 2 m width for manufacturing structural, suspension and seat parts in standard, high-strength steels, DP with thickness ranging from 0,3 to 2,5 mm. Design with CATIA V5, try-out and optimization are made in-house. We have 2 mechanical try-out presses of 500 and 1000 tons. Our customers are OEMs and Tier 1s worldwide. ARA (www.ararobot.it) designs and manufactures robotized welding cells and customized industrial automation. T

We are a family company from a small village Prekopa in Vransko community. We have been active on the market since 1993 and we have been trying to adjust to the market and clients’ wishes since then. S&A Company was established with the purpose to produce all kinds of tools but we also offer other services such as production of all kinds of roughing jaws and mechanical parts in metal industry. We are active on the domestic and foreign market. We mainly export to Austrian market where we have been successfully doing business with bigger Austrian companies that value our quality and affordability for 15 years. Our company has been technologically modernised recently, and in this way it is also capable of producing even the most demanding projects in the field of machinery industry.

Irmamolde, is a Portuguese privately owned company that builds injection molding tools. We have 32 years of experience in the manufacture (development-design-manufacture) of tools, and one close cooperation with customers in various industries such as automotive, packaging, household appliances, Agriculture, etc. Our core competence lies in tools up to 30T - we are the right partner in the 2K tool; Slide tools, jaw tools, rotary index plate tools and stack tools.