Consultancy, prototypes and series parts For more than 50 years Sass-metal manufactures drawing, deep drawing and bending parts especially for the rubber processing industry. After the experience gained we support at an early stage of development very strictly to our clients in the development and improvement of rubber-metal parts. With the help of in-house design (SolidWorks) the designs can be quickly implemented in tools and prototypes in our own tool. Already in this phase is taken by using a robust quality to mass production techniques. For series production will be built depending on the part geometry insertion progressive or transfer dies. In the part surface (oiled, washed or provided with corrosion protection) take note of the special requirements of vulcanization. As the base material cold and hot bands are used in the thickness range between 1 and 5 mm. To meet the need for lighter components, we also process steel up to 600 N / mm ². Articles of our production, please refer to: Air springs, Metal rubber elements Vibration elements, Hydrobearings, Chassis suspensions, Motor bearings and Machinery bearings. Our range includes: Butted and clinched rings as a substitute for pipe sections, Support rings, Reinforcement rings, Pole plates and flywheels for the electrical industry and Fußkufen for the furniture industry The initial sampling and ensuring the quality in series production takes place according to the established in the automotive industry standards. We are certified to ISO 9000:2008. We look forward to your inquiry.

Sarzi - Sheets is a family company, which was founded in 1978 and are specialized on editing sheets and pipes. The company owns an area of 64.000 m², of which 14.000 m² is covered. The machinery, which deserves special attention, will have constantly the current technology adapted to complete the requirements imposed performance requirements. In the processing of sheets and tubes, we are able to work following execute: - Laser cut laminations - Laser cut tubes - Cutting and welding with laser 3 D - Bending pipes - Bending of sheet metal with CNC-machines - Welding with robots and manually - Sheet metal working with presses - Laser Marking Since we have forty years of experience in these areas, we have the high knowledge necessary to assist our clients with their problems and offer an appropriate solution. Our main customers are in the automotive industry, where we exhaust parts manufacture. However, we are also in the agricultural industry operates where we partly provide for the machinery and earthmoving machinery. Mobile Bridges for aerospace and automation of various components are included also in our program. Since 1999, we work with a quality program, through which we have been qualified. We currently have certificates of ISO 9001, ISO TS 16949 and ISO 14001 standards. We attach utmost importance to current standards and our staff constantly is informed of ongoing training accordingly so that our name in the future all is demands.

The Company In 1947, Joseph Hegner the family business, which now includes about 30 employees. It employs all relevant occupations in the metal processing: locksmiths, welders, apparatus manufacturers, mechanics and toolmakers. The team of Hegner metal masters all construction techniques. The specialty of our company: We are able to combine the full range of pipe and sheet metal processing and in-house powder coating, we give your products the desired color. We turn your ideas with the most advanced 3D CAD Solid Edge programs and extensive machinery. Is the development of a prototype successfully completed the final details at a first small series have been clarified, we at the series a most efficient processing method. The fair pricing, high quality work, on-time deliveries and open communication convince our business partners. Long-term stability The Hegner team focuses on long-term stability. Good deals which ensure the existence, are more important than sales at any price. So we are also later at your disposal. We think and act for our customers. We create and maintain jobs.

Arpogaus Stahlbau is a mid-sized German manufacturing company focusing on steelwork and mechanical machining. With our ~35 well-trained employees, we produce large-scale prototypes and small series with a weight of up to 20 tons and a length of up to 20 meters. We mainly serve customers from the construction machinery industry.

Metal Investigating operating for prototypes, single, small series and medium series. Welding certificate according to DIN 18800 Class D for MMA, MAG, TIG, MIG gepr welders for aluminum, mild steel and stainless steel Water jet Blank and pre-processing means of water jet technology in the 2-D + 3-D range of all metals such as steel, stainless steel, aluminum, titanium, copper in sheets, as well as partially processed products, such as bending edge moldings and dished bottom that only after the Editing us can be cut to shape. Also, plastic, GFG, CFRP, glass, ceramics and composite materials are cut by us. We cut almost all materials in 2 - and 3-dimensional design. Construction We offer special constructions of any kind according to your interests. Contract manufacturing of components and assemblies including mechanical processing, welding construction and final assembly including surface treatment, surface, edge and slide grinding of metals. Metal Sheet metal and metal processing, production of steel stairs, metalworking and welding, window systems, door systems, door systems, curtain walls made of steel, aluminum and stainless steel.

CHODOS CHODOV s.r.o. is a medium-sized machinery company, employing 170 people. The main production program includes machine production for rubber and plastic industry. We follow and develop the brand history and tradition of CHODOS. The company has its own design and technological department and production base for development and production of own products in machinery. CHODOS disposes of management quality certificate according to the standard ISO 9001 and ČSN EN SO 3834-2 for welding processes. - design, development, production and servicing of machines for the rubber and plastics industry - design, development, production and servicing of machines and machinery - production of compact heat transfer stations - machining, heat and chemical-heat treatment and plating of components

Technical springs for industrial applications We produce our technical springs according to your wishes and specifications. We can handle all customary spring steels constisting of chromium-nickel, copper, bronze, brass, nickel silver, heating element wire and other special materials. Surface treatmens are processed if desired. Please request your stamping and bent parts in accordance with DIN 6930/ 6935. We are experts for the production of technical springs especially for extreme filigree parts used for medical and dental technology (sterility), for building measurement devices (repeatable accuracy) or for hearing aids (small size of the parts). Furthermore the technical springs of Alfred Weigel KG Federnfabrik are applicated for sun shades with a recess function. Foundation 1st July 1909 We are certified to DIN ISO 9001:2015 and QM 14001:2015

We have been developing and producing highly complex tube fittings for automobiles for 30 years. Together with our customers, we manufacture individual product solutions for sunroofs, convertible systems or cooling and injection systems that are innovative, reliable and safe. Precision is our guiding principle. It is the engine that drives our employees. It is embodied in every single component that leaves our factory. Quality is our top priority. It is guaranteed by the use of the latest technologies and constant process control and optimization by our 170 qualified employees.

The H. Steinhart metal goods factory GmbH & Co. KG represents the most modern type of production techniques in cutting metal machining. Founded in 1954 by Henry Steinhart as a factory for craft metal products it developed from 1979 becoming one of the most modern services and specialists in the fields of Sheet & Tube processing / wire bending technology / manufacturing of complete assemblies including surface Annual investment of considerable sums of money in the latest manufacturing technology, a work done in over 20 years of know-how, and a team of highly motivated specialists with the desire for perfection are the basics for a steady increase in the efficiency of H. Steinhart metal goods factory GmbH & Co. KG. The three pillars of our corporate philosophy High quality standard Punctuality Flexibility make our company a reliable and competent partner for a broad customer base.

Founded in 1999, Euro Forming Service GmbH is the expert for non-cutting forming. The processing of medium and large series is our profession; In addition to the automotive industry and its supplier industry, the areas of application are also in the areas of drilling technology, agriculture and other branches of industry. Our main production site and our administrative headquarters are in Bitburg. We operate another production facility in Heiligenkreuz in the Lafnitztal (Austria).

Jaspers Sondermaschinen GmbH & Co. KG, founded in April 1994, is an innovative company based in Haren/Erika in Emsland. As a system supplier, we develop and manufacture both individual parts and complete system components in series from steel and stainless steel materials with highly qualified employees. Since January 2021, we have been using robotic welding technology to produce welded assemblies up to a component size of (LxWxH) 900 x 400 x 700 mm quickly, precisely and in high quality. Our products are used in a wide range of industries, such as: Agricultural equipment and machinery Agricultural hygiene Wastewater treatment plant construction Electrical industry Air conditioning and environmental technology chemical industry Wind turbine construction Vehicle construction (bus and train) street furniture General mechanical engineering We are also the manufacturer of the OIL-brake safety system. This system is used in refrigeration, air conditioning and heat pump systems that use oil as a lubricant outdoors. In the event of a leak or accident, the OIL-brake safety system prevents oil from entering groundwater and thus contributes to environmental and water pollution.

The company Saraj-komerc has a longstanding experience in metal industry, especially in the automotive, hydraulic and electronic industry. Our range of products includes different metal machining parts, turned parts, stamped parts, connectors, springs, assemblies.

Your competent partner for manufacturing mechanical products on CNC-controlled processing machines. VETEC Zerspanungs- und Feinwerktechnik GmbH has been successfully manufacturing complex mechanical individual products and assemblies for over 30 years. The focus is on both single-part and prototype production as well as series production for small and medium-sized quantities according to your specifications. We see ourselves as an innovative manufacturing company for high-quality precision engineering. A creative team of highly trained specialists, technicians and engineers enables the efficient implementation of individual manufacturing services with consistently high quality. Our motivation, continuous modernization of our machinery and close cooperation with our customers are the basis of our corporate success. performances As a competent partner for CNC machining, our long-standing customers particularly appreciate the close cooperation in optimising their projects for production and comprehensive advice on the selection of possible materials and surface and material treatments. We can draw on over 20 years of experience here. Our specialty is primarily high-precision and complex components. We have a lot of experience in processing a wide variety of materials. With regard to technical requirements and project management, we respond flexibly to the wishes of our customers. We work for a wide range of sectors of the economy. Our customer base includes companies from the automotive industry, medical technology, aerospace, the electrical industry, many companies with innovative products, research and development companies and much more. We offer you the following services: CNC turning CNC milling Customization development and construction during production Assembly of components Finishing according to our service profile (see brochure and website)

We master the entire metalworking value chain, from development to in-house prototyping to series production. In doing so, we combine customer proximity and partnership with know-how, experience and innovative strength. Our strength lies in the combination of engineering expertise, precise prototyping and high-quality series production.

We, the HES Factory, are a young company and want to help in this way with our high-quality and holistic services to implement your projects.

We are a company with many years of experience in the production of catering equipment, steel accessories, steel light and semi-heavy structures (aluminum, stainless steel and steel ...) and powder coating and sandblasting as a complete process. We use modern CNC machines (laser, punch, bender 3m, 4m to 6mm sheet metal bending thickness ...) in all phases of material production and processing. Our certified welders are qualified to do demanding work, and all this is accompanied by a professional team, which with the latest programs prepares the basis for the preparation of documentation and monitoring of the production process

Adestra metalworking, flexible modern enterprise, the sheet metal and tube machining, and mechanical machining can offer turning and milling. We design, produce and assemble according to customer requirements: housing, terminals, machines, machine covers, custom solutions, components and assemblies.

WHO ARE WE? We are a new and young company specializing in all sheet metal systems, especially laser cutting and bending, edging and laser welding. We are located in the north of Croatia 5 km from the Slovenian border and just as far from the highway which is very important to us makes it easily accessible. We are there to manufacture the requested parts precisely and with a high quality for you We look forward to working together.

Hieselaar is a full-service metalworking company that helps clients worldwide achieve their ambitions. We have been doing this since 1976, with a team of 60 dedicated professionals. We love to develop together with you. From idea to advice. From prototype to series production. Thanks to short lines of communication, we come up with smart solutions together. Flexibility, customization, and clear communication are always at the forefront. We believe that our connection with you makes the difference. Laser cutting, punching, bending, tube laser cutting, (robot) welding, powder coating, assembly, and more.