Regionality as a guarantee of success On-time delivery and reliability in project management are in demand. As our customer, you are desperately looking for efficient local suppliers and partners to ensure the ability to deliver your products, services or for your project, taking ecological and economic aspects into account. With our regionally focused service concept, MBL already meets all the requirements of the changing economic and geopolitical conditions through its regionally shaped value creation concept: • Use of regional supply channels to avoid material bottlenecks and to optimize delivery times • Our extensive local network of cooperation partners from the fields of engineering, software development, switchgear construction, etc.as a guarantee for the successful handling of complex mechanical engineering challenges • Holistic, locally concentrated project management, from the conception through engineering to the in-house manufacture of your machines, including all subassemblies - everything from a single source Our performance promise: • Adherence to deadlines, reliability paired with the highest level of quality "made in Germany" • Efficient order and project processing through consistent automation and digitization along the value chain • Use of the latest technologies to implement your product or project requirements • Comprehensive customer support even after delivery / project completion • Low carbon footprint due to short supply chainsas a guarantee for the successful handling of complex mechanical engineering challenges • Holistic, locally concentrated project management, from the conception through engineering to the in-house manufacture of your machines, including all subassemblies - everything from a single source Our performance promise: • Adherence to deadlines, reliability paired with the highest level of quality "made in Germany" • Efficient order and project processing through consistent automation and digitization along the value chain • Use of the latest technologies to implement your product or project requirements • Comprehensive customer support even after delivery / project completion • Low carbon footprint due to short supply chains

The Anton founded in 1889 Tränkle GmbH & Co KG, based in the Black Forest is an international family, which developed and produced for various industries precision turned parts, valves and assemblies. At the sites in Triberg and Elzach over 1,000,000 components up to 65 mm in diameter are daily in 3-shift operation, manufactured in the most modern and most economical production environment. Are processed materials such as brass and aluminum, but also cutting steel, stainless steels and special alloys.

CNC: 5-axis milling, turning, wire EDM ///prototypes + series special devices ///Design + Construction + Manufacturing

Your supplier for complete and component manufacturing Our company employs in Bautzen approx. 100 employees and is primarily involved in machinery and Works in plant engineering. We have a Machine park for mechanical processing, which Chipless design, a powerful welding shop and surface treatment equipment. Well-trained and committed employees ensure for ensuring that the products/products are always from high quality and on-time delivery to our customers be delivered. AFT Förderanlagen Bautzen GmbH & Co. KG is certified in accordance with DIN ISO 9001:2015. Our experience lies in the Development, planning, production and assembly of Systems, components and parts for the general mechanical engineering, steel construction, the Sheet metal construction, special machinery and plant engineering and in series production.

About Q TECH s.r.o.: The company Q TECH s.r.o. was founded in year 2000 as a small business company providing trade mediation in mechanical engineering. At present, we are focused on custom production of steel structures and machinery using welding, including machining, surface treatment by painting and assembly. Our team consists of approximately 90 experienced and qualified people. Our production space approx. 4500 m2 and load capacity of cranes enable the production of parts up to a weight of 16 tons and a length of 25 m. We are focused on the foreign trade, most of our production heads to Western Europe. We are holders of significant certificates for the field of welding. - We are focused on production and assembly of steel constructions - Production and assembly of machined parts - Surface treatment - NDT services - Our company employs about 90 people - We´re mostly oriented abroad to countries like Germany, Norway, Netherland, France and others

The company was founded in 1995 by Mr. Kress Wolfgang Kress. Since 2005, the company headquarters in Biebergemünd Wirtheim is in a new operations building. The production possibilities are very versatile and flexible and we offer a wide range of vielfltigen opportunities with innovative and trendsetting ideas. We are engaged in special machines and equipment; fixture, test benches and Prüflehrenbau; contract manufacturing in the field of milling, turning and construction, construction of vacuum components; There are any materials from stainless steel to aluminum to various plastics (eg: glass fiber reinforced plastic, Peek) and "exotic" materials such as Inconel 600 or stainless steel 1.4435, obtained and processed. Currently 20 employees are in operation in the production, design and administration. Our staff are made up of skilled workers, foremen and engineers, thereby Please contact us for products from a single source and of the highest quality. Since April 2006, our company is DIN EN ISO 9001: 2008 certified.

The company Willy Müller GmbH Co. can look back on almost 75 years of successful activity in mechanical and apparatus engineering, starting with a small workshop for wrought iron and welded constructions up to special constructions in the interaction of the production areas mechanical processing and sheet metal processing, e.g. combination torches, flaps , E-filter parts. Our focus: - Load suspension devices: Here the production from the standard crossbeam to the special lifting device for the Machine transport - Furnace construction: oil, gas and coal dust burners (also combined) and their components such as Standby lances, nozzles, swirl chambers (also in armored versions) etc. - Rail vehicles: supply parts for trams, subways and IC trains such as B. door bearings, door locks, striking plates, bolts of all kinds (also hardened and nickel-plated), fastening elements, housing covers, brackets, handlebars, tie rods and the like.vam (total volume approx. 1,000 different parts) - Expansion joints: metal expansion joints (preferably rectangular) of approx. 300 x 300 mm left. W. to compensators for DENOX systems with edge lengths greater than 20,000 mm in steel and stainless steel (also heat-resistant), max. Unit weight so far: approx. 33 t Companies like Mitsubishi Hitachi, Bilfinger, Siemens, EON, RWE trust as long-term customers the quality of our work. What started as a one-man operation in 1945 has developed into a company with 30 employees within two generations. We produce with a modern machine park and have a wide range of offers and so we can say with a little pride: "A strong team works miracles" and MADE IN GERMANY

Innomatix is a Belgian high-end machining company. In full-range of "CNC-turning " and "CNC-machining", including EDM wire cutting. We specialize in technical complex products for various sectors (machinery building, construction, aviation, defense, medical, food industry , etc.. ) We produce small to medium-sized series for the European market.

Our Story: The company was founded in 1994 by Heinz-Josef Schlemmer as a sole proprietorship on part-time basis. The basis was the further handling of turned parts in wages for the turned parts industry. After a short time the first cam-type machines were put into operation, it was followed by the acquisition of a property with about 150 m2 of commercial space. In the year 2000/2002 and 2004 made further purchases of CNC lathes, whereby the premises were again too tight. In the year 2005 is Mr. Schlemmer the opportunity to acquire the company Johann Schnekenburger GmbH, where he was employed full since 1983. The company JDS, which was founded in 1950 by Johann Schnekenburger and until 2005 was in the second generation of family ownership, was for more than 50 years in the field of fastening technology on the market. It screws of all types were produced. The companySchlemmer of turned parts had been operating successfully for over 10 years in the field. With the acquisition of the company by Johann Schnekenburger Schlemmer that production range was extended many times and it was founded in the gourmet Metalworking & Fasteners GmbH & Co KG. We invest in the future: This is the foundation and our philosophy. We will invest in the coming months and years in the latest machinery and equipment. The expansion of warehouse and production areas are planned. Our range of services: Our machinery includes several modern CNC lathes with up to 5 axes, rotary transfer machines, bend machines, thread rolling machines, such as various finishing machines. The product range comprises rotary parts of all types and materials, threaded rods and screws with hexagon socket as Hexagon. The production of fasteners for the dowels and construction industries as well as an integral part of the furniture and electrical industry. As will be made all the operations which in-house usually we are able to respond at short notice. Heat treatment and electroplating finishes, such as hot-dip galvanizing are made by reliable partner at short notice outside the home. Our market: We deliver the Swabian quality work in over 40 countries around the world. However, the focus is on Germany and Europe. Our Quality: State of the art measuring equipment and SPC-controlled programs ensure quality. Our products are subject to constant review of the ISO 9002 is similar. This was taken over by the company Johann Schnekenburger that was zertiviziert to 2003, according to ISO 9002. Re Zertivizierung is sought.

Welcome to Luka Kunststofftechnik GmbH Deep drawing is a fine art of plastics processing that requires experience and precision — and that is exactly what we bring to the table. For over 30 years, we have been your reliable partner in the field of deep drawing technology and CNC processing. Our high-quality thermoformed parts can be used in a variety of ways. Our products impress with their precision, durability and quality. We offer expert advice on material applications for all thermoplastics, including fire protection, anti-graffiti coating, UV protection and other special requirements. Luka Kunststofftechnik GmbH — your expert for innovative plastic solutions.

Our company is a 68-year-old company and with its expert team and qualified product selection, we offer our customers and the companies that choose us the opportunity to work together by prioritizing quality. Our company video https://youtu.be/iOXV0C5f_v8?si=kLx2VGLXe1QAvMev

Astor Otomat has been serving in the Hydraulic Systems, CNC Lathe, Machining, Mass Production, Automotive Spare Parts, Tractor and Construction Machinery Spare Parts sectors since 1986. Our company, which has more than 40 years of experience, has successfully completed hundreds of projects in all industrial sectors, especially in the industry, with its expert staff and has become a leading company in its sector. As Astor Otomat, we closely follow the developments in production technology all over the world and constantly work to offer the most advanced technologies to our manufacturers. Traceability is ensured before, during and after production, and the necessary quality assurance conditions are met according to customer requests. We offer products and projects that comply with international standards, technical conditions and customer demands based on customer satisfaction.

Gernot Czerwinksi GmbH is at home in the field of metal processing (especially in the area of aluminum milling). We process parts ranging from the smallest parts up to a maximum size of 2000x3000mm. Turned parts in the area of individual parts and small series are also part of our portfolio. Gernot Czerwinski GmbH is characterized by excellent quality and fast delivery capacity. We procure the material, process and, on request, your parts can also be surface treated. We are looking forward to your request.

We are a family business with 90 employees. The core competencies are the production of precision mechanical components as well as complete assemblies. In addition, the manufacture of Macor glass ceramic components. We have around 35 employees in production and around 30 assembly technicians. We manufacture from single parts to large series. Simple component as well as highly complex. The cleaning of the components is standard and we have a measuring laboratory with standard VDI class 1 (+/- 0.4 ° C over 24h).

Saracchi Srl provides high-precision machining with state-of-the-art turning and milling centers, supported by decades of experience and rigorous staff training. We ensure reliable processes, tight tolerances, fast lead times, and consistently high quality for every component.

see our Web site at: www.lauble-drehteile.de

Customer-oriented contract manufacturing in the wage since 1983. We Ship To request items, assemblies through to complete systems for: automotive, packaging machinery, food processing, transmission, papermaking, printing machinery, agricultural machinery, metal working machinery (machine tools), Wrappers for film or paper, tooling, wood industry. Complete execution of projects including assembly (mechanical / electrical / pneumatic / hydraulic). Equipped with advanced CNC machine tools produced ERKA precision turned parts, precision machined parts in wholesale as well as in small series. Products: We manufacture turned parts with a diameter of 1 mm to 600 mm and lengths from 1 mm to 4500 mm. We manufacture milled parts up to 1000 x 1200 x 5000 mm. Processing methods: Our modern machinery enables the complete machining of complex turning and milling parts. Delivery program: pistons, bushings, washers, rings, screws, cones, control parts, tubes, sleeve, shaft, axle, hub, drum, cylinder, cross beams, flanges, rollers, nozzles, weldments, panels, spindles, assembly, painting, signing, welding, consoles Wämebehandlungsverfahren, surface coating: KTL paint, 2K paint, priming, powder coating, galvanizing, burnishing, Phospahtieren, chrome plating, case hardening, nitriding, nitro-carburizing, Certified quality: Qualified employees, structured processes and the use of modern technology are the building blocks for the quality, which satisfy our products. Furthermore

TOKARMET deals in the production of metal elements by machining on CNC lathes and mills. Highly qualified staff and years of experience in the field of machining makes us one of the most reliable companies in the region. We specialize in the production of parts, subassemblies and components for industrial automation, hydraulics and the gas industry. We are currently looking for regular customers in Western Europe. I would like to invite you to cooperation. Witold Piasecki - (owner)

Established in 1999, and previously part of 1 of 6 plants in Slovenska Armatúrka Myjava. We produce according to customer´s drawings turning parts. We have single and multispindle automats and CNC lathe machines, working with brass, steel, and stainless steel. Mass production is for parts from diameter 3 mm up to 14 mm and other parts up to 51 mm. Long parts we do on CNC sliding head machine_Citizen up to diameter 20mm. We produce parts for all branches of industry.