Precision since 19971958 Foundation of VEB Schrauben- und Normteilewerk Hildburghausen After Reunification, the company is broken up and the turning shop is taken over 1990 Conversion to Verbindeelemente GmbH 1993 Privatisation of Verbindeelemente GmbH and continuation of activities by TORNO Verbindeelemente GmbH 1997 Purchase of fixed assets and inventory by Maier Automatendreherei GmbH in Dunningen, Baden-Württemberg, and foundation of Maier GmbH & Co. KG on the former “Schraube” industrial estate. 1998 Initial certification in accordance with DIN EN ISO 9001 2005 Construction of a new production building on own premises in the “Schraube” industrial estate. Creation of 5200 m2 production area and 500 m2 administrative area. 2006 Initial certification of environmental management in accordance with DIN EN ISO 14001:2004 and introduction of an integrated management system. 2007 Finalist Award of the “Großer Preis des Mittelstands” (prize awarded to Germany’s most successful medium-sized enterprises)

• forms and jigs • mold and composite casting in all common aluminum alloys • Machining in CNC technology • 3D coordinate metrology We have for decades been an established company in the metalworking industry and place the highest value on quality and delivery. In "altmann" high-quality molds and composite casting is manufactured in all common aluminum alloys, for unit weights of 30 g to 3.5 kg. Our annual output is about 200 tons.

The company developing and manufacturing Eßbach was founded in Berthelsdorf 1999. Since April 2007, we relocated our headquarters to Brand-Erbisdorf. Here are covering an area of 750m ² various machining centers, design workstations and above average well-trained staff available with which we can also realize your tasks! Our high quality standards are certified by our certification to DIN ISO 9001. Examples of our products you can found in our website www.efe-essbach.de. Our main pillar is the development, production and distribution of heat sinks for power electronics. In addition to liquid cooling body systems based Unicool we also manufacture air-cooling systems of the body or combined devices after the system coldplate. Of course, we adjust the devices on your required specifications. Customers who use our products or benefits, include Siemens, Bosch, Baumuller, Bonfiglioli Vectron GmbH and Lust Antriebstechnik GmbH. In addition to the production of heat sinks, we operate a small special engineering. With this we are able to manufacture high quality facilities capable of over CAD design and CAD / CAM Interfaces. Thus, several different labeling systems to the standard product labeling including PDC connection were realized in our home. The investments are made entirely with control, and CNC-axes and delivered. Our customers can be found among others in the field of automotive and supply industry. Examples are: - Test benches for drive spindles with data acquisition - Labeling systems with freely programmable CNC axes 800x600x400 - Marking gear parts with interface to the PPS system - Devices for assembly and testing purposes - Molds for aluminum cast parts up to sizes of 800mm, including processing of castings when required - Special coolant systems for machine tools With our technology, we are able to realize customer-specific solutions, including the manufacture of parts and assemblies.Our machinery, we have expanded to operate and in particular the following machines: - 1 CNC machining centers with tool change 2000x800x800mm, internal cooling and swivel head - 1 CNC machining center 1000x500x400mm with tool changes and internal cooling - 1 CNC machining centers with tool change 500x400x400mm and NC rotary table - 1 universal CNC milling machine 800x400x400 (vertical and horizontal) - 1 CNC lathe, diameter 300mm long and 300 - Conventional turning up to 1000mm long - NC mandrel tube bending machine to D 26x2mm VA tube - Korundstrahlkabine for VA materials - Edelstahlbeizeinrichtung inside and outside - TIG welding workplace The CNC machines are connected to our CAD / CAM system and thus to work in a position to meet your or our drawings. Again, we have customers such as Heidelberger Druckmaschinen AG, Deckel Maho, Samputensili GmbH, Bharat Forge Aluminum GmbH & Co.KG or Licatec GmbH.

We specialize in the manufacture of drive elements such as Timing belt pulleys (focus) Sprockets Poly-V and V-belt pulleys -Klemmverbinder/Klemmplatten For timing belt Gears Turning, drilling and milling parts In addition, we provide timing belts in almost all versions and divisions (Neoprene / PU / Flex / welded / processing such as punching, grinding, coating, etc. is possible)

The Karl Hoch GmbH is a family of 3 Generation with currently 40 employees. We, the Karl-HIGH GmbH, dominate as one of the few companies on the market almost all metal cutting process for large components, because we have a comprehensive range of machines. Our equipment and experience of our employees are the foundation of our competence. It includes the machining of large parts with high precision, the mass production of difficult to machine materials and repair of complete machines and motor units. The name stands high for over 75 years for reliability and customer focus.

Our family Orlowski CNC machining was founded in 2005 by J. Orlowski in Mettmann. As a reliable supplier with core expertise in CNC milling and turning technology we have built a modern machine park over the years: Here diverse Bearbeitungsaufganben can be performed through effective production processes. We provide, inter alia, complex products in small and medium series here, but also special parts and prototypes for the engineering and mining industries. Our customers come from the fields of mechanical, hydraulic and valve technology, equipment and plant engineering and precision mechanics. Particularly in these industries is the highest level of quality is an essential prerequisite. A hypothesis whose fulfillment is guaranteed by our dynamic team to 100%.

Welcome to the V-Tec Europe GmbH On the following pages you will find information about our company and our products. We provide high quality standards for our products. Further developments, improvements and novelties, which were the goals for our Height Adjusting Elements (HVE). Take advantage of our years of experience in the field of Adjustment as problem solving, for your applications. When you didn´t find the right solution in our standard product range, we are able to manufacture in cooperation with our partner, products according to your needs. Possible Applications: The Height Adjustment Elements are used in any application where different heights adjusted, or surface irregularities must be balanced. Due to the different variations, the settings can be found already proven applications in the areas of: Automation technology Drive technology Mechanical Engineering Plant engineering Special engineering Transmission engineering wind power stations

As a result of our flexible production strategy, we offer products in a wide variety of areas from automotive industry to durable household goods.

MK MATERIAL is a dynamically developing company in the field of production and trade. The company's wide range of products mainly includes products manufactured in accordance with the requirements of the PN-EN, DIN and ISO standards. At the same time the company is realizing orders for carbon steel, alloys, stainless steel, copper, brass, polyamide, polyurethane, delirin, etc. products in accordance with customer specifications (photo, technical drawing, sample, etc.). In addition, the product range includes fastenings, clips, zamak and plastic end fittings made in own moulds. Production is carried out in compliance with the requirements of the Quality Management System ISO 9001: 2015. MK MATERIAL conducts activities aimed at creating a company with high value and brand awareness, supported by many years of experience and necessary actions leading to the development of the company.

Industrial Design - Metal - Machine - Engineering

As a highly specialized manufacturer of sensors and measurement electronics with almost 50 years of experience, we have the knowledge and equipment to design and manufacture complex fine-mech components, assemblies and electronic circuits. If your project requires this knowledge, we will be happy to develop components for you and take over their manufacture. Centerless grinding / through grinding Outer diameters from ø 0.7mm to 20mm and lengths up to 3000mm Centerless grinding / bar grinding / rod grinding / tube grinding Flexible and unstable geometries such as springs, tubes, hoses, rods, etc. Materials: steel, stainless steel, titanium, cobalt-chrome, PTFE, PEEK, POM, aluminum Production of turned and milled parts Conventional turning as well as CNC turning and milling Steel, stainless steel, aluminum, brass, bronze, nickel, titanium and various plastics bar machining from 5 to 80mm diameter, 200mm in three-jaw chuck maximum turning length up to 500mm, milling parts up to 300mm x 300mm, 10kg construction and creation of 3D data and drawing derivations TIG welding manual / CNC TIG welding Manual and CNC TIG welding of steel and stainless steel Single parts up to 1000m length and part weight up to 10kg Including design and manufacture of welding gauges and auxiliary fixtures Highest quality requirements with welding approvals If required, various welding seam tests / quality tests Laser welding and laser / photon beam welding in vacuum Welding of smallest components and thin wall thickness (membrane) Low heat input and therefore minimal distortion High welding speed with best cost efficiency Welding of metals with different melting points Vacuum welding for critical materials like titanium, etc. Single parts up to approx. 1000m length and part weight up to approx. 10kg Development of electronic circuits Development / schematic design of electronics in the field of measurement technology PCB layout / board design / circuit board unbundling and optimization Construction of functional samples / prototype construction / initial sample series Graphical user interfaces for PC or embedded systems Driver development for Linux, Windows and Mac Firmware development for microcontrollers Production of electronic boards Printed circuit boards Production of electronic boards according to customer specifications / blueprint Small to medium series production in the quantity range of 10-1000 pieces Testing / optimization of circuits and implementation of adjustments SMD basic assembly and conventional soldering of components for customization

MECABOSCH, is a machining workshop with more than 45 years at the service of the industry, with extensive experience in mechanization and productive know-how, which has allowed it to build customer loyalty, always providing an adequate response to their demands. With a qualified team of 40 people, and facilities of more than 3,000 m2, including 600 m2 for assemblies, we offer a comprehensive service to the engineering and manufacturing industry of machinery and capital goods.

precision aluminum die-castings • high/low pressure and gravity die-casting • 34 years experience • highly cost competitive • machining service and surface treatment • engineering and tool-development service • production of complete assemblies service and order managmement from Munich/Germany – cost competitive production in India • highest production standards, state-of-the-art machinery, highly qualified staff • secure and reliable long-term supply chains • express order service • smaller quantities possible • full logistics and warehouse service in Germany

Ottmar Schiek Maschinenbau was formed in 2013 with the takeover of Manfred Kriwet Düsseldorf. Wolfgang Harings founded. We have many years of experience in the field of sample production for materials testing, including foundries, heavy engineering, heat treatment, welding process technology and pipe manufacturers. We are specialists in the production of heat-resistant copper welding components and contact jaws as well as contract manufacturing in the areas of sawing, turning, milling and drilling. As an owner-managed company with one employee, we have many years of professional experience. The quality and reliability of our work are our top priorities.

TechX is a brand that specializes in industrial solutions. We offer a wide range of services, from turnkey systems to steel machinery manufacturing. With our extensive knowledge and experience, we handle every project carefully and offer customer-oriented solutions. With our expertise in machining, we process complex parts precisely and develop innovative solutions in the areas of engineering and project planning. We act on the principle of continuous improvement and innovation without sacrificing quality. We work hard to earn our clients' trust and contribute to their success.

In terms of dimension, we take it very well: Maximum experience and minimum tolerances. When we speak of our work, we are talking about a whole new dimension in engineering. For with the largest processing machine parts, it is not just about extraordinary dimensions, but also precision and efficiency to passion and commitment. The Leipert Maschinenbau GmbH has evolved into one of the leading specialized company in Europe for the manufacture of large parts. And this is no accident: Even with manufacturing dimensions of up to 34 meters, we are able to reduce the tolerances to an absolute minimum. In order to achieve this dimension of accuracy, give all our employees their best every day.

Detech Medical & Multiaxis Machining Co. produces mainly high quality parts and components for high-tech industries i.e. Medical, Optical, Electronic, Aviation and Defense in the field of high precision machining. Our Working Field: *5ax. CNC –Milling, *3ax. CNC Milling Maximum 1020x600x600 mm *CNC- Turning till Ø280 mm *CNC- Turning and Milling with C axis: till Ø280 mm. *Surface treatments for machined parts are possible *3D- Measurements (1000x600x550) *CAD-CAM Systems Our high qualified experienced personal and best suited machine park is grant for our quality. DETECH PHILOSOPHIE: CUSTOMER SATICFACTION FIRST!!! *QUALITY: Highest Quality with highest Technology and highly qualified personnel, certification from TÜV-SÜD. *COST: minimal flow time *FLEXIBILITY: Capability to modify and to change Cycles for demands +RELIABILITY: Not only supplier also a Partner and long term business relationships *TIMELY ACCURACY AND FAST DELIVERY: Experience, Quality Machines, Free Zone and location *PRIVACY: Our utmost priority to protect your privacy and data’s We are looking forward to your request and to having your long term business cooperation!

The t.i.m.a.s. is a company that performs precision machining performing work on materials such as cast aluminum, extruded, cast iron, steel, nylon, stainless steel. reliability and quality have always been the company strengths ISO 9001: 2008 SQS

We are your specialists in the field of CNC milling technology, CNC turning and welding work. Since 2021 we have been manufacturing high-quality components for machine and mold construction at our site in Illschwang, Upper Palatinate. With our modern machinery, we can support you with a wide range of services in your project. If we have aroused your interest, do not hesitate to contact us and request your personal offer. "Precision and accuracy are components of accuracy."