For all your spare parts and high performance valves

"Do not go - there's not!" True to this motto Budack is worked from the beginning in the locksmith. Heinz Budack, master of general machine, bought in 1977 in a forest Locksmith and started his own business. On their own land was cultivated and a workshop with drill - rotary, - set up milling and grinding machines. The production at this time consisted largely of small orders in the area of machining. In 1983, his wife worked with in the company and supported her husband actively in productive work. With the turn changed the order situation, Heinz Budack did not give up, but took on the challenge. Never before had so many fences and gates made. Every door, every fence is unique, speaks for quality work, and so the customers do not stay out. In the small workshop, production could not be realized in the long term, so Heinz Budack built in the years 1995/96, in the industrial area south forestry a new production hall. In October 1996, the new production was over 3000 square meters with 10 employees, including his wife and son Matthias are added. Locksmiths and locking technology in addition angeboten.1999 as a service also has son Matthias completed his training and qualification for the "champion metal worker trade" and thus ensures that even in the next generation of Locksmith Budack the traditional production continues. On 31.12.2008 it was time, symbolic of the company key was handed over to his son Matthias Budack, which is now successfully lead the family in the future.

“OIL AND GAS EQUIPMENT PLANT” LLC is engaged in the development and production of a wide range of equipment for the oil and gas production and refining industry, metallurgy, energy. The enterprise management system is certified according to ISO 9001: 2015, ISO 14000, OHSAS 18001 (ISO 45001). We would like to offer your company cooperation in the machining of metals. Below you can see other types of work that we perform: 1. Turning (equipment: ST25, ST40HE, ST45 with the option "big bore", 1740RF3, 16B16T1, 1V340F30, 1510, 1531M, 1M63, 1A64, 1M65, 16K20, 16K40) linear dimensions from 10 mm to 3000 mm, diameter from 10 mm to 1250 mm 2. Milling (equipment: VF3YT with rotary table HRT310, EC1600YZT four-coordinate FP17M, Heckert FSS-315, 6P83, 6T13) linear dimensions from 10 mm to 16000 mm, diameter from 10 mm to 700 mm 3. Boring and coordinate boring (equipment: 2A622 with upgraded digital display 2A614, 2V440A) the sizes of a working zone are 1120х1250 mm 4. Drilling (equipment: 2C132, VO-63, 2532L) the sizes of a working zone are 1100х2300 mm 5. Grinding (equipment: ZA164, 3M132V, 3M153, 3L722A, 3D711V, HSH83A, 3K228) round grinding: linear dimensions from 10 mm to 2000 mm, diameter from 10 mm to 400 mm flat grinding:: the size of the working area 1250x320x400 mm internal grinding: linear size up to 1200 mm, hole diameter from 40 mm to 400 mm 6. Heat treatment of details according to drawings of the customer or the technical task. Our sales department and service department are also available to quickly answer all your requests. Please give us the way where we can contact on the issue of cooperation

VoTec GmbH is your reliable supplier when it comes to machining. Founded in 2011 between Osser and Großer Arber, we have specialized in the Technologies milling and turning, both as a single part and in series. Due to the continuous modernization of our machines, we have managed to present a machine park that more than meets the state of the art. For example, all lathes are automated, both with loading magazines and robot technology.

Machined parts from Ø 10 to Ø 80 mm on single spindle automatic lathes Small and medium batch production Machining on numerically controlled lathes and machining centres from Ø 10 to Ø 300 mm Screws and bolts to specifications Machining of wrought and cast iron

Turned parts. Precison and quality for all industrial sectors.

We are a medium-sized company and have been dealing with the manufacture of parts and components for special machines and plant construction for over 10 years. We deliver to our customers on time (flexible delivery times also possible), qualitatively and economically at the best conditions. We currently employ 16 people in 2 departments. Our core competencies are: - Machining CNC milling and CNC turning of metals, non-ferrous metals and plastics. - sheet metal working Cutting, bending, and welding. - Rapid prototyping FDM / FFF 3D printing - assembly manufacturing - CAD construction (SolidWorks) 3D models for machining, sheet metal parts, welding assemblies and hybrid or surface models with the corresponding technical documentation.

Our core competence is the complete production of complex parts in high quality for the machine and tool. This leads us rather to class instead of mass of: With lot sizes from 1 to 100 with high vertical integration, we are in our element. Whether pilot production, 5-er-lot size or prototypes - when it comes to quality, accuracy and problem solving, you should seek our services. We specialize in the complete production of individual parts and small series for general machines, jigs and fixtures. Our 30 employees work in a two-shift operation, so we can guarantee a high level of flexibility. Who want to make it must create. All the better if you do it gladly. Just as we: With 30 employees in two-shift operation. Certified to DIN EN ISO 9002. And still looking for improvements in AV, manufacturing and customer service. Perhaps it is due to our company's history.Actually there is the CNC production GmbH for over 30 years. As long as she was the CNC workshop of the TBT deep drilling. Your job: pilot series and small series and prototypes for special machine. When the TBT change of ownership, the department should be dissolved. The former production manager Franz builder acquired the majority stake and took over the management. Since then, the company has grown 50% Bonus, 25% revenue increase, five new employees - the numbers speak for themselves. From the former Department a successful company was. The recipe for success? A rehearsed, down to earth team, an uncompromising attitude to quality and the right mix of experience and youth.

Individual, professional and Made in Germany - 3defacto is your service provider for product development, systems engineering, mechanical engineering and construction. We offer optimized solutions from a single source. So that your ideas can easily become reality.

The company Frentech Aerospace sro, now one hundred percent in the Czech owned, was founded in 1994 to be with the aim to become a qualified and competitive suppliers in the field of precision engineering. Initially, the products were targeted in the field of medical technology, microelectronics and special machines, including the delivery of spare parts.

Since 1952 WSK "PZL- Kalisz" S.A. has been representing Polish aircraft industry and manufacturing aircraft piston ASz-62IR and AI- 14R engines. They are designed to power the following airplanes: An-2 and M-18 “Dromader" (ASz-62IR) and respectively PZL-101 “Gawron” and PZL-104 “Wilga” (AI-14R). These engine types have been worldwide recognized for their quality and awarded numerous quality certificates issued in the USA, Canada, Brazil, People’s Republic of China. They have been produced in thousands and have proved failure free thus clearly evidencing their highest reliability and performance quality. WSK “PZL-Kalisz” S.A. also overhauls and performs repairs of ASz-62IR and AI-14R engines. In addition, the Company manufactures and repairs assemblies and parts of TWD-10B engine for An-28 aircraft. WSK “PZL-Kalisz” is a joint-stock company (own capital is 85 mln PLN and paid-up capital is 45,86 mln PLN) operating on the basis of the Commercial Company Code. Principal shareholders of the Company are as follows: - Industrial Development Agency 75,45% - Company employees 11,59% - SEMA Sp z o.o. 6,25% - the City of Kalisz 1.35% - Energy Plant "Energa S.A." 1,20% - Other shareholders 4,16% WSK “PZL-Kalisz” is a capital group composed of the mother company and its 2 fully-controlled subsidiaries: - ZOT “NARZĘDZIOWNIA WSK” Ltd. - PPUH „MECHANIK” Ltd. WSK „PZL-Kalisz” S.A. is the company of the essential importance for the Polish economy and is considered as part of the Polish Defence Industry Potential. As a result of the Company's restructuring process WSK "PZL- Kalisz" S.A. has extended its business into wide range of manufacturing programs and servicing activities including production of high pressure engine parts, oil pumps, gears, aircraft screw gears, turbochargers, push rods, pump housings and first of all crankshafts for high pressure engines. All these components require high precision machining in performing special requirements of its customers. WSK "PZL-Kalisz" S.A. maintains business relationship with well-renowed companies such as: General Electric Transportation Systems, Allison Transmission, Turbomeca, Sulzer Textil Switzerland, Pratt & Whitney Kalisz, and many others. Part of the Company production is designated for military aviation. The Company aim and priority is focused on meeting the Customer’s requirements that can be with WSK "PZL-Kalisz" capacities. WSK “PZL-Kalisz” S.A. acquired modern machinery operated by highly qualified and experienced technical staff. The Company continuously seeks new Customers and Suppliers especially in the manufacturing of precise and aviation components requiring high precision processing. Interested partners are always welcome. In 1999 the Company was awarded ISO 9001-2000 Certificate. In 2000 the Company was granted PART-145 Certificate. The following year – 2001, the Company attained PART-21G Certificate. In 2002 the Company was awarded AQAP-2110 Certificate. In 2004 WSK “PZL-Kalisz” S.A. was granted a license by The Polish Ministry of Internal Affairs and Administration for manufacturing and trading products and equipment for military and police force application as well as transfer of technologies. In 2009 the Company was awarded AS 9100 Certificate.

Your partner in the field of CNC processing of metal and machining technology. We manufacture individually manufactured high-tech products, prototypes and small series. We work for industries that require complex components with high precision.

The company REBATECH INDUSTRIAL SOLUTIONS, is a Manufacturer / Producer, founded in 2014, operating in the turning of steel and metals industry. It is also present in the CNC grinding and heat treatment of metals industries. It is based in Izmir, Turkey.

Specialist in turned parts with diameters ranging from 8 to 100 mm with mono and multispindle machines (automatic and CNC) as well as broching and gear cuting,grinding heat and surface treatement.

Company founded in 2008 as a tool shop specialised in EDM and 5 axis machining

The company Apocer, Lda was founded in Pombal (Portugal) in 1980, as a result of the need for technical solutions for industry. Apocer, Lda started its operations by producing moulds for tile pressing and rubber overmoulding (engine support) for Delphi Portugal and USA . Over time, and following the decline of the construction market, we have expanded our manufacturing range to include the production: *Cold Runners for rubber, *Moulds for rubber parts, *Dies for the extrusion of plastic granules (compounding), *Small and medium sized manufacturing of metal parts.

Development, production of prototypes and individual parts to large series are among our competencies. These are complemented by comprehensive services such as engineering, repairs and spare parts around the hydraulic and mechanical engineering. Subcontracting: turning conventional Ø 925/600 x 10000mm Throughput Ø 140mm Subcontracting turning-conventional Grinding / polishing conventionally Ø 630 x 4100mm Subcontracting-grinding-polishing-conventional honing conventionally Ø 38-550 x 5000mm Subcontracting honing-conventional CNC milling Clamping: 2700 x 1000mm Travel: x = 2500 mm y = 1200 mm z = 1000 mm Table load: 6500kg Subcontracting-milling CNC Turning / Milling CNC Ø 700 x 3000mm Throughput Ø 127mm counterspindle Simultanfräskopf Subcontracting turning-milling CNC circular welding Ø 20 - 800 x 8000mm Subcontracting circular welding special machine For loosening and tightening very high torque (Up to 600 kNm) Subcontracting special machine

More than 15 years ago the owner Gabriele Togneri decided to give up his job as Production Manager in a big company to create his own company in Lucca to produce mechanical components. Our name is a promise: we offer to our clients the best Italian excellence in mechanical precision, in order to respond to different requests from all the major industrial sectors and to guarantee high quality and productive standards. Innovation, evolution, quality and upgrading are the four keywords that guided the evolution of Meccanica Precisa up to today, placing the company in the highly competitive market and guaranteeing Italian excellence.