We are an industrial and commercial agency with direct suppliers and production facilities in Poland, Czech Republic, China, Italy, Taiwan, India, Turkey and Germany. We design and produce together with our partners to our customers in the following areas: Welded structures such as caddies, storage racks, long-product pallets. Steel construction, welding in general. Surfaces such as rays, galvanizing, painting, powders. Sheet metal processing all materials: CNC punching, nibbling, edges, laser welding, cutting Fully automated bending center, powder coating, Deep drawing, laser cutting, punching from coil, components, Services according to customer requirements Turned parts, milled parts made of all materials Castings and their processing Plastic injection molded parts up to 2,500 grams weighing, + Toolmaking Extrusion plastic profiles Aluminum profiles and their processing Cable assemblies, wire harnesses, control boxes and control cabinets completely Agricultural Engineering Bent wire parts Diecast Bend and process tubes

The company ONIKS Ltd was founded in 1991. and is 100% privately owned. Currently we have employed 70+ highly qualified, motivated and trained workers. We are recognized as a reliable partner of companies all over the world, whath motivates us for additional investment in our solutions and constant investment into the new technologies and our employees. We are focused on exporting to the countries of the European Union (Germany, France, Belgium,...), European countries like Switzerland, and also to the domestic market. With our employees and machinery, we can create products for the most demanding customers. The production is based on the development and processing of metals and plastics with lathes, milling machines, grinders, CNC lathes, and CNC milling machines, water cutting, and high standards of output quality.

Our customers are offered everything they need within our group of companies, all in one basket: from development and project management via the production of tools for plastic and metal fabrication, through to manufacturing the parts. In this way we closely co-operate with our customers in developing functional structural plastic and metal components on the basis of the design, thereby achieving an optimum combination between plan, design, manufacture, and cost structure. The integrated possibilities have enabled us substantially to shorten the project run up to the point of series production. The systems Pro-engineer and Catia, available to our staff, permit the creation of structural components and tools, "in one casting" as it were. Injection Moulds Our staff in the individual manufacturing areas have state-of-the-art technologies and most up-to-date machines (such as 12-wire and 15-wire cavity sinking EDM machines) at their disposal. In producing moulds with a guaranteed number of shots, especially for the automobile industry and consumer electronics, our dictum is precision and quality. This holds true for injection moulds, diecasting, duroplastic, two-component, rotating, transfer and insert/outsert moulds, just as much as it does for two-colour moulds, combinations of hard and soft plastics, automatic wire leads, in-mould decoration, and precision gear wheels. Rapid tooling with the aid of our EOS metal sintering machine M250 Extended makes it possible to produce mould inserts for injection moulds and prototype tools within a very short time. Eighty moulding machines in Vienna and Hungary, with a clamping force of between 25 and 1,100 tons, offer all the possibilities of manufacturing moulded, thermosetting and duroplast, gas-injection moulded, two-component moulded, insert and outsert moulded, as well as in-mould decoration parts. Our machines are equipped with automatic robot systems, and automatic packaging lines complement the production line. Vienna: 3-shift operation / technical products and precision parts with a mould clamping force of up to 500 tons, Hungary: 4-shift operation / technical products and design parts with a mould clamping force of up to 1,100 tons. Your plastic parts are coated in three fully automated painting lines on a water-soluble basis (single-component or two-component coating). Your metal parts are electrostatically painted, from the smallest parts up to housing coatings for consumer electronics.

WSK Poznań Sp. z o.o. is a manufacturing company with over 100 years of tradition and experience in precision metalworking. Company started production in 1918. Since begining it's located in Poznan, Poland. WSK Poznan has a three divisions of business, production of mechanical injection pumps for diesel engines, aerospace electromagnets and servomechanisms and precision metalworking based on documetation of customers. Factory can provide complet production services such as turning, milling, gavlanizing, heat treatment and final assembly. All steps of production are located in Poland and for procuction we are using european origin materials (steel, bronze, aluminium, forgings and castings). In case of any questions, please feel free to contact with us.

We are a Slovenian long-established company, which already more than ten years in the Metal processing industry is represented. We are engaged in the production of Fasteners, such as screws and ornamental elements for the furniture industry. The Our products are manufactured using CNC lathes, automatic lathes and Machines, which are necessary for a postprocessing of our products. Our Company is also specialized in the roles of threads in all shapes and sizes. We also offer the opportunity to galvanize or bronzing products. After Wish we pack products also. Our products can according to your request individually or according to standard specifications be made. In our company, we are aware that the price of the Is directed to the quality and appearance of the final product. That is why we continually strive our Products to improve and at the same time produce favorable for the buyer.

Daedalus is a machine shop and your competent partner for high-precision machining. Through the development of a robot and software-driven manufacturing system, Daedalus is able to machine complex CNC parts without human intervention. The company was founded after a collaboration between robotics and software engineers from Silicon Valley with production and machining experts from leading German manufacturing companies. The company uses modern 5-axis CNC machines to serve customers all over Europe.

We are a global leader and solution-oriented developer and producer of special ball valves. Highest quality and customer focus distinguish us. "Your satisfaction is our motivation, daily motivation and basis of our corporate philosophy." The many years of successful implementation of solutions our engineers and technicians is directly reflected in the safety and reliability of ball valves produced. Influent findings from the customer contact are directly translated into new, tailored concepts. National and international standards are given full consideration alongside specific customer requirements.

Turned-Liebermann 35 years of experience in the manufacture of precision turned parts, a continuously renewed machinery and a highly motivated team, turned parts Liebermann your partner for automatic turned parts. Fast, flexible and cost-effective to work for our customers is our business goal. Quality is our standard. History The company Theo Liebermann was founded in 1972 by Theo Liebermann and his wife Maria Luise Liebermann. First, the production took place in improvised workshop rooms that were in the basement of the apartment building. There machines were used, which were taken over by the former employer. First orders the company received Theo Liebermann from other turners. In 1988, the turning shop "Peter watches" was adopted. The move to the new production facilities was 1995. In 2003, Mr. Ralf Liebermann the management of the operation. In 2006 the company was in Liebermann GmbH & Co.KG renamed. Currently 14 employees work in the company. Products On 6 multi-spindle machines from Tornos, 16 Long-moving and a short turning automatic turned parts are manufactured with high precision aluminum, steel and brass. The parts produced have dimensions of about 2-20 mm in diameter and a length up to 250 mm. News Commisioning of the new CNC lathe machine In August 2007, our long-turning machine was taken from the type "Star SR 20 R II" in operation. After extensive training and several test runs the end of August already completed the initial customer orders on the new machine. The results obtained turned out so positive that already in the spring of 2008, the purchase of another machine of the same type is planned. In the future, we will contribute by investing in new technologies to further improve the quality of our products and to respond more flexibly to the needs of our customers.

The company Paul Weber GmbH & Co. KG was founded almost 80 years and now has its headquarters in Herrenzimmern in Rottweil / Germany. With a complete range of precision turned parts, we supply our customers nationwide and internationally. Our main products: Turned parts, eccentric, round, square, hexagonal, flat, profile Precision turned parts, CNC turned parts, machining parts, turning parts short, multi-spindle parts, Rotary transfer machining parts as * Expanding nuts, bolts, screws * Locking pieces, * Valves * Banjo bolts * Eccentric bolt, eccentric, * Bearing pins * Terminals * Rivets * Jacks * Standoffs with milling the thread, Standoffs * Fittings * Sleeves We process these materials: * Cutting steel, stainless steel, stainless steel 1.4305, * Brass, non-ferrous metals, * Copper, copper alloys, * Special alloy * OSNA CU * Aluminum, aluminum alloys * High-alloy steels

We work with the biggest Italian and international groups in many different sectors and markets and our strengths are the flexibility and dynamism that allowed us to reach in few years a level of exponential growth to which we can add a notable rate of customer satisfaction. We are convinced that thanks to our own flexible and dynamic way of relating to the market, and to our customers, we can face the difficult and typical challenges of the new global economy. Our machine fleet is continually updated paying attention to new technologies, which enable us to go further to optimize the range of our production and allow us to deliver the finished product including the necessary certifications. We hope to start with you as soon as possible an interesting collaboration and to add you to our best customers. For any other information or doubt we stay at your complete disposal and wait for your request for quotation.

We are a 9001:2008 certified according to DIN EN ISO system supplier of mechanical machining technology. Our specialty is single and small batch production of high-quality, complex and dimensionally accurate components and complex workpieces. Our customers are mainly in the fields of special purpose machinery, jigs, patterns and model construction, precision engineering, plastics engineering, tooling, mold etc..

MECAVG is a precision machining company specializing in milling and turning services for the production of high-quality mechanical components. We focus on prototype development, small and medium production runs, and custom tooling solutions. Our team is composed of experienced professionals, with expertise in delivering high-precision parts for industries such as automotive, aerospace, and industrial manufacturing. We pride ourselves on delivering reliable, precise, and tailor-made solutions to meet the specific needs of our clients. At MECAVG, customer satisfaction and innovation are at the core of our operations. Contact us to learn how we can support your projects with precision machining excellence.

Adoz s.r.o. is a Czech engineering and manufacturing company with over 30 years of experience in precision metalworking and custom production. We specialize in CNC machining, welding, and assembly of components for a wide range of industries, including automotive, energy, construction, mining, and agriculture. Our modern production facilities are equipped with advanced technologies to ensure high-quality output, flexibility in production volumes, and on-time delivery. We work closely with our customers to deliver tailor-made solutions that meet the most demanding technical and quality requirements. Adoz is a trusted partner for all customers, offering reliable cooperation, technical expertise, and a commitment to long-term business relationships.

The SMARTVISION factory offers you high-performance, reliable and economical solutions for manufacturing your components from a wide variety of materials such as non-ferrous metals, stainless steel, plastics or steel. Regardless of whether it is individual parts, series production or fixture construction: from design, programming, production, surface treatment, pre-assembly of sub-assemblies to the assembly of entire assemblies by SMARTVISION GmbH & Co. KG, we offer you everything from a single source.

Since 1965, TGM, always managed by the Grosoli family, has been offering itself as a quality supplier for precision machining. The company's commitment is to carry out all types of work and provide customer support, without ever sacrificing the highest quality of the product and the punctuality of the deliveries necessary to guarantee an excellent supply service Thanks to continuous investments in people and cutting-edge equipment and sophisticated management techniques, TGM offers its customers a complete high-quality service.

We are a young, ambitious, innovative and dynamic company with a clearly defined growth and development strategy. We specialise in the production of complex products and highly demanding metal products for the needs of medicine, the hydraulic industry and agricultural machinery. We use modern equipment from the world's best manufacturers, which enables us to provide comprehensive solutions in an excellent ratio between quality and price. We are highly flexible and offer a wide range of products and react quickly to product changes and other needs of our customers. We are distinguished by a combination of modern technologies, state-of-the-art fast processes and flexible production for dedicated use. Our development strength is a combination of clear strategies, development directions and commitment to our values: flexibility, partnership and efficiency. Our vision is based on technological development, at all levels, and in the continuous improvement of the quality of our production processes, the goal of which is: successful and long-term cooperation with our customers and partners.

Dear valued customers, We are pleased to prepare a project proposal for you. The following areas are our strengths: - Aluminum extrusions (including processing, surface treatment, just-in-time) - Stamping and bending parts - Pressure die castings (aluminum and Zamak) - Component creation - Plastic parts - Turning and milling parts

Polytech-lab is a center that inherits the tradition of three generations of designers and manufacturers. Our vocation is to provide the theoretical and practical tools for the conception, engineering, implementation and testing of projects ranging from precision mechanics, component technology, industrial design, to architecture and visual arts. The experience gained in the field of traditional construction techniques is combined with a continuous process of research and experimentation aimed at innovative digital design and manufacturing technologies, while an ever-expanding network of partners allows for the organic management of the complex of different phases necessary for the materialization of the project. Indeed, the laboratory provides a network of knowledge embedded in the most important manufacturing realities of the market, matured over decades of fruitful and systematic collaboration. An overall vision of the methodological and pragmatic landscape in the field of drawing and design, together with a layered knowledge of traditional and digital fabrication techniques, passing through a genuine creative flair in the formulation of strategies and the realization of the equipment necessary for the industrialization of the project, are the factors that make Polytech-lab the ideal place to develop and realize your ideas.

Zerspanungs-Gesellschaft mbH Porath was founded on 01.02.1993 and is based in Wismar. We are a manufacturing company for machining with, for example: 2x 5-axis machining centers, 4x CNC-controlled lathes for diameters of 1mm-60mm, 2x cylindrical grinding machines, a surface grinding machine and much more.