We are a traditional family-run company based in Upper Seemen / Hesse on the edge of the beautiful nature park "Hoher Vogelsberg" We supply for you Precision turning and milling parts in small and medium series Special CNC turning, CNC milling Surface grinding and drilling Wage arrangements Our production of turned parts including diameter from 1mm to 450mm and lengths up to 1000mm In addition to the processing of steel, aluminum, non-ferrous metals and plastics, we are specilised to the processing of following stainless steels and special alloys 1.4462 (Duplex) 1.4501 / 1.4404 / 1.4548.4 (Aerospace) / 1.4021 / 1.4057 / 1.4104 1.4301 / 1.4571 / 1.4435 / 1.4923 and difficult to cut nickel alloys and titanium (3.7164) Our Lieferprogamm includes: Bushings / washers / rings / shafts / flanges / bolts / axles / fittings / Steel sockets / thin-walled tubes and more Our services are completed by the conventional heat treatment method such as carburizing, nitriding, plasma nitriding and surface coatings such as chrome plating, galvanizing, burnishing, anodizing, inter alia, Our company goal is to provide you, our customers, drawing parts, suitable, to produce at reasonable prices while maintaining delivery deadlines and deliver.

Your supplier in the areas of CNC milling CNC turning Manufacture and assembly of electro-mechanical assemblies The company Aumüller Precision Engineering was founded in 2001 and since then has been mainly engaged in machining and assembly of electro-mechanical assemblies. Our customers Our customers are mainly from the fields of ■ Mechanical Engineering, ■ Precision Engineering, ■ Medical and ■ electronics. Our competencies We manufacture your products according to drawings from the item to the series on modern machining centers. In our assembly department we assemble electromechanical assemblies ready for installation according to your specifications. Our strengths Due to our flexibility, we are able to respond quickly to the needs of our customers and to realize kostengünstigst projects in close cooperation with our customers in the shortest time. Mechanical working in the field: - CNC milling max 1500 x 800 mm - CNC Turning max turning diameter 350mm x 1000 - CNC measuring

ISH offers all types of standard seals also specifically on the application prepared special seals and plastic parts in almost all engineering plastics and elastomers. Where: quality over quantity. We offer the production from a single piece, but do not shy away even before large quantities. Response time is very important to us, so we respond to all inquiries within a short time, at the latest within 24 hours. Our delivery time can still specify in days, often in hours. To round off our product range, we also offer connection technology of the highest quality. All kinds of bolts and nuts with requirements or according to drawing, with acceptance certificate and testing. We cover the following application areas: • Reciprocating Seals o Hydraulic Seals  wiper, rod seal, piston seal, chevron packings, Cup seals, lip seal, Stangengleitring, Kolbengleitring, compact piston seal, o Pneumatic Seals  wiper, rod seal, piston seal, chevron packings, Cup seals, lip seal, Stangengleitring, Kolbengleitring, compact piston seal, • Rotary Seals o shaft seals, rotary seals, V-rings • Static Seals o O-rings, gaskets, packings • Complete gasket sets o for the repair of, for example, hydraulic cylinders Large Diameter Seals up to 4m diameter can also be found with us! • Semi-finished o plates,

We are a Automatic CNC Turnery (founded in 1983 ) that produce precision metal parts, components and assemblies We ensure: - reduced times for the realization of batches - constant quality on each piece - KAN-BAN deliveries, - For delivery, we make use of qualified carriers that offer a quick and safe service on the whole national territory and abroad. We are competitive with batches starting from 100 pieces, on diameters from 2 to 70 millimeters from the bar. Materials utilized: We make use of the best steel mills on the market, to always ensure a perfect performance of our products and we are able to trace each batch. In addition to common and automatic steels, light alloys (aluminium), brass, bronze, plastic, we have gained a large experience on the processing of: - Austenitic stainless steels series “300” - Ferritic and martensitic stainless steels series “400” - Alloys and super alloys, Inconel, titanium, duplex e super duplex - Alloy steels, quenched and tempered steels We manufacture particulars and components for the following sectors, according to the customer’s specific design: • Medical/Biomedical • Hydraulic, fluids flowing • Pneumatic • Packaging, Food Industry, Pharmaceutical • Automotive, Motorcycle and Cycling • Industrial Automation • Railway / Cableway • Electronic • Sustainable Energy • Gardening/Hobby • Earthworks and Agricultural in general • Window and door fixtures Where required, we can carry out the assembly of the Articles, in the specific area within our Production Departments and, for the Medical sector, we have a dedicated assembly hall

The Ospelt & Haas Institution was founded in 2014 by Sandro Ospelt and Angelo Haas. Since then, the company is located in Eschen, Liechtenstein. With focus on the CNC milling technology, we offer not only the manufacture of customer-developed workpieces on the entire processing of an order. We like to take on new challenges and can also manufacture highly complex workpieces thanks to our 5-axis simultaneous machining center. Competence and reliability when machining complex milled parts and module that is what the Ospelt & Haas Institution. We are available for request.

ZŚZR is located in Lębork (Pomorskie Province) in Poland. Our company has been operating constantly since 1996, providing a wide range of services in machining. Over the years we have performed thousands of orders, providing our customers the highest quality and short delivery time.

Professional machining Mikron was established in 2017. We specialize in machining services including, among others, CNC milling, CNC turning, conventional turning, drilling, threading and cutting. We execute both individual and serial orders using materials such as steel, stainless steel, aluminum, copper, bronze, brass and plastics. We have a well-equipped workshop and use new technologies, thanks to which we implement details to the production according to the documentation and provided patterns. We produce for companies from various industrial sectors, e.g. automotive, agricultural, electrical machinery, hydraulics and pneumatics sectors. We stand out on the market for the high quality of details, which goes hand in hand with competitive prices and short deadlines. After processing, all details are subjected to precise technical and measurement control. Our qualified staff allows us to adapt to the individual needs of customers. We are open to cooperation with contractors in the country and abroad. If you want to learn more about our offer, please contact us. We stand out for:: high quality of details, modern machinery, experience in the industry, use of modern cutting tools, technical and measurement control, programming based on the provided technical drawing or detail model, short lead time, competitive prices. We address our offer both to large companies and individual customers. Thanks to qualified staff, we guarantee you that each service will be made with the utmost care and precision. Our services: CNC Milling vertical 4-axis machining center of KAIDA KDVM 800L model, working surface 800x530x530mm; vertical 3-axis machining center of LEADWELL VMC 40, working surface 1020x520x520mm. CNC Turning CK6150x1500 CNC turning lathe, turning length 1150mm, turning diameter over support 270 mm; BT-300L CNC turning lathe with bar feeder, turning length 750mm, turning diameter over support 410 mm. Conventional turning Universal turning lathe KNUTH TORRO 250, turning length 2000mm, diameter 400m. Cutting diameter to 320mm CORMAK G5025 band saw, cutting diameter 320mm.

Freckmann FEINWERKTECHNIK can look back on more than 40 years of experience in the field of precision engineering and mechanical engineering. We design individual components and assemblies for a wide variety of industries. We use the latest 3D software, such as Inventor-CAD, Inventor-CAM, BoschRexroth MTpro project planning software. Our services: Construction, CNC turned parts, CNC milled parts, 2D/3D laser parts, Sheet metal parts, BoschRexroth aluminum profile assembly

We are producer of high quality milling and millturn parts, from 1 to 1000+ parts are all in our focus. With the 5 axis machines and millturn capabilities, also with our CMM capability, we serve the best part production for our customers.

Our principal activity consists of CNC metalworking and professional assistance in processing components of different materials. The raw materials we process include different polyamides, non-ferrous metals, and stainless steel among others. We are able to carry out the whole process, starting from chopping through surface and heat treatment to packaging the finished product and deliver it worldwide. If needed, we can deliver the product with mesurement record according to VDA or PPAP system. Our producing CNC machines are equipped with the latest-generation thread-guide and powered tool body built-in the revolverhead, which make C and Y-shaft machining possible, starting from 4 mm diameter. We always adjust the most suitable machine to our clients' needs, taking into consideration the machining process. Our corporate philosophy reflects our personal and professional experiences, that is, quality can only be achieved through excellent technical solutions and regular maintenance of our machinery, by using impeccable and continuously monitored materials, tools and measuring devices. Our company has been granted the integrated ISO certificate.

Carbonella Rocco e Figli s.n.c. is a universal automatic turning company for parts made of steel and non-ferrous materials from 3 mm to 32 mm diameter. For more than 25 years now, we have been manufacturing parts in high quality for various industries like precision mechanics and writing instruments. Furthermore we offer full-service. We supply several Italian companies, of which many successfully export our assembled products to different countries throughout the world. A large percentage of our products is exported to Germany, Switzerland, France and England. We mainly ship raw items in several degrees of roughness. Upon request, those items can also undergo heat treatment and galvanic surface upgrades.

Werner Breitschädel GmbH has been active in the field of machine and tool construction since 1950. For our satisfied customers we manufacture precise tools and mechanical engineering and plastic parts. To carry out our orders, we have a team of highly qualified employees who are always up to date with the latest technology thanks to regular further training.

Our vision is to be a top performer in production services through advanced technologies. We started the operations in 2019 with a management team having more than 20 years of experience in industrial processes being able to cover a wide range of processing services at high quality standards.

We are a family company from Schlanders in South Tyrol, our activity is in the field of mechanical engineering. Since 2002, we have been manufacturing turned and milled parts in our company according to the highest quality standards. From individual parts to series production, we are your partner. Outstanding quality, clean work and timely delivery are our top priorities.

We are a CNC turning/machining company located near Pamplona, Spain, equipped with state-of-the-art Japanese machinery (Nakamura, Citizen, Star, Okuma) and technology for both fixed-headstock (up to 150 mm in diameter) and sliding-headstock (up to 38 mm in diameter). We supply various sectors including hydraulics, pneumatics, wind energy, locksmithing, gas cylinders, motorcycles, bus seats, automotive, gear cutting, diverse machinery manufacturing, fluid control, etc. We work with free-cutting steels, carbon steels, alloy steels, pre-treated and stainless steels, brass, aluminum, bronze, and plastics in series starting from 1000 units

Our company specializes in designing and manufacturing special machines. industrial automation and specialized in the production of highly complex milled and turned parts. The highest priority of our company is the continuous development and expansion of our product and service portfolio in order to always offer our customers the highest quality.