If >>> not - there's not Following this motto we combine for more than 15 years of production engineering for the complete machining sophisticated machine components productivity and flexibility with the help of horizontal machining center to a economic optimum. Our services include turning, drilling and milling of large, complex hydraulic components, Machine parts for large vehicles and special purpose machines. Our strength lies in the consistent use of the latest manufacturing technologies. Even turning operations of cubic parts whose processing have usually been very labor intensive to conventional lathes was, can with us on one of the BAZ through the use of combined Rotary milling are carried out completely in one setting. The hereby achieved increased process safety and significantly reduced tooling and clamping times are Benefits that we like to pass on to our customers. The connection of the BAZ to a FMS pallet rack system with 60 pallets and a total of 940 tools allows us sufficient machine pallets to store retrievable using appropriate clamping technology. Thus we are able at any time to react flexibly to customer demand absolute, even in small quantities. The slim structure of a small enterprise, 25 committed and qualified employees, a manufacturing engineering Organization at the highest level and of course quality "Made by MUZ" are the benefits that our Know how to use in long-term partnership clients. Interested? We see your inquiry on gladly!

mbo Osswald has been in existence for more than 50 years now, and that name has just as long been a guarantee for high quality mechanical linking elements. Usage of the latest manufacturing techniques guarantees top quality and rapid delivery times. Our Products made of steel or stainless steel (V2A, V4A, Niro, 1.4305, 1.4404, 1.4301, 1.4571, 1.4435) - Clevises, DIN 71752, DIN ISO 8140, clevis joints, DIN 71751, clevises with male thread, clevises with elongated hole, clevises with hardened cross hole, mating pieces for clevises, folding spring bolts, bolts, cotter bolts, DIN 1443, DIN EN 22340, ISO 2340, DIN 1444, DIN EN 22341, ISO 2341, threaded bolts, DIN 1445, angle joints, DIN 71802, axial joints, ball studs, DIN 71803, rivet studs, housings, DIN 71805, ball joints, rod ends, DIN 648, DIN ISO 12240-4, pivoting bearings, DIN ISO 12240-1, rod ends hydraulic, DIN 24338, ISO 6982, DIN 24555, ISO 8133, shaft retainers, retainers, locking washers, DIN 6799, retaining rings, DIN 471, joint rods, machine parts – are standard. We are also the right partner when it is a question of special parts. We manufacture precision turned parts (CNC turned parts) and milling parts in accordance with your specification or offer you the benefit of our know-how to find solutions to your special applications. Our machinery is characterised by high flexibility, special repeat accuracy and short machining times. For you, this means economical production of simple workpieces or even of geometrically complex parts of high-tensile steels with closely toleranced dimensional and surface specifications. We can manufacture for you rod parts and shaft parts made of steel, machining steel (1.0718) and stainless steel (V2A, V4A, Niro, 1.4305, 1.4404, 1.4301, 1.4571, 1.4435) with diameters of 4 mm to 65 mm up to a total length of 650 mm. In particular, cross-holes, turned grooves, millings, multiple-edge turning and complicated geometries can be executed. Whether you require pilot, small-lot or mass production of your special part, we guarantee short delivery times and especially economical manufacture. mbo – Systematic solutions for linking technology

Bahnbetriebswerk, founded in 1866, is today the largest company in the Baltic States in the field of repair and conversion of gas locomotives, diesel service trains and electric trains. We offer wide range of services f. Metal processing at: - CNC laser cutting; - sawing, turning and milling work; - pipe and sheet metal bending; - casting (steel, cast iron, aluminum, bronze); - thermal treatment, - electroplating, chrome plating, - special solutions, - Assembly production.

Our company was founded in 1949 by Otto Rimmelspacher in Karlsruhe. We are a universal oriented Lohndreherei and Lohnfräserei. In addition, we are able parts made of steel, stainless steel (V2 and V4) or special materials to weld such as Hastelloy and titanium. Dimensions: Ø20 - Ø300 mm, length up to 3 m, weight up to 200 kg, TIG manual welding, welds with a programmable TIG circumferential seam welding machine. From customers demanded extra-tests of the welds are performed externally. (TÜV, DEKRA, x-ray exams, FE exams, etc.). Furthermore, we can turn, mill and weld plastics. (Heating element sleeve welding or hot air welding). Our metal welders are TÜV - tested according to "EN 287-1141 T". We also process steps according to "DIN EN ISO 15614-1" and "QW-483", and admission AD2000 Module A1 according to Pressure Equipment Directive 97/23/EC. We are also Materialumstemplungsberechtigt for "10204 EN 3.2" At a certification according to "DIN EN ISO 9001:2008" we are currently working, we will complete this certification in the first quarter of 2011. Furthermore, we manufacture eductor and air Reisser according to customer specifications. Eductor are used for pumping water in wells, in low-lying water table. Air Reiser care in domestic water systems for a Constant air cushion in the air pressure tank. These products are designed and manufactured specifically to customer requirements, such as flow rate and head. For more information, please refer to the brochures in our download area. Our 15 employees are almost exclusively skilled metal workers who work independently and know that it comes down to it. On lathes we have conventional center lathes up to a peak height of 250 mm, as well as various CNC lathes Company INDEX to a turning diameter of 300 mm and a tip length of 1500 mm, with and without tailstock, with and without bezel. Our largest center lathe can handle rough-and-work on waves up to a length of 2500 mm and a peak height of 350 mm. Focus of our production is the production of single parts and small to medium series for industrial customers, such as nozzles and diffusers. We also manufacture complete pressure vessel according to customer specification, including flanges according to DIN and ASA. One of our NC lathes can also be operated with hydraulic shuttle chucks for housing to NW 25 or NW 32, the processing can thus be made on 4 sides in one clamping. In NC milling we have a CHIRON machining center with 36 tools and four programmable axes, the fourth axis is set up as a rotary axis. Maximum process paths X = 1600mm, Y = 400mm, Z = 415 mm. In addition, we still have a smaller machining center with 8 tools for drilling and thread to M 12 in steel. Quantity Spectrum 1 to 1,000. A CNC lathe is equipped with an automatically operating portal charging system for chuck parts up to max. Diameter of 120 mm and a maximum weight of 5 kg set.Here we can also realize larger batch sizes. For painting, we have a small spray booth. Can we have a customer, such as galvanized surface coating, not solve yourself, we cooperate with reliable partners.

High precision, complex turning, milling and grinding parts - from 4 mm to 1,800 mm in diameter and up to a length of 2000 mm and finished assemblies, ball screws and motor spindles for the automotive, mechanical engineering, power tools, aerospace, heating and Building Construction. Manufacturing capabilities work Wertach: Turning and Dreh-/Fräsbearbeitung to Ø400mm, length up to 1000mm Milling and Fräs-/Drehbearbeitung cubic and rotationally symmetrical parts to ø1800mm, length up to 1000mm. Feinstbearbeitungstechniken * External grinding part length max 3000mm, 1000mm ø max * Internal grinding part length max 1400mm, 1000mm ø max * Spline grinding ø max 300mm, length up to 800mm * Spline grinding groove width 4mm to 40mm groove width 220mm Ømax * Surface grinding 800x400x500mm * Honing ø4 to Ø72mm Heat treatment: quenching and tempering, case hardening, carbonitriding, vacuum hardening, annealing, Kurzzeitgasnitrieren, carburizing, induction hardening and freezing Deep-hole drilling Clear Deburring Production spectrum ballscrews Diameter 12-125mm Thread length up to 3000mm Gradient of 2.5 mm to 50 mm a and mehrgänging Investment type: 2-or 4-point system Accuracy classes 1-3-5-7-10 ISO 3408 Feritungsverfahren whirled / ground Special threads on request The stiffness

We are a toolmaking and finished with a total of four employees since 1997 molds, measuring, Spann, and other devices, hydraulic control blocks, milling and turning parts for mechanical engineering, small series and initial samples.

Industry suppliers for the machinery and plant engineering. Manufacturing designs from sheet metal and tube. Material processing of steel, stainless steel and aluminum.

CDF specializes in turning and milling parts of ferrous and non-ferrous metals and plastics, especially piecework and small batch work. We guarantee quality and short delivery times. We work with reliable suppliers. So you can also contact us for 5-axis milling, grinding, and lapping honen-, curing, wire EDM ...

We have years of experience in machining and electroplating. We provide one-stop services from consulting and CAD and CAM to procurement of materials, fabrication, and delivery. We approach each job focusing on reliability, professionalism, and on-time delivery. We provide routine progress feedback. Our extensive processing facilities provide high capacity for different work methods (including milling, turning, and cutting). Your business is always welcome!

Recomec SRL presents itself as a commercial company with over 20 years of experience in the ferrous and non-ferrous materials processing industry. Quality and seriousness have recommended us all these years, being proud of our partnerships.

Unic is a medium size company (fifty employees) with more than 40 years of experience in precision machining on customer drawing as well as on standard production according to our catalog articles. The workshop has a production area of 4.500 sq.m. with a machine park that includes CNC lathe machines, transfer machines and 5 axes machining centers. The company has a noteworthy experience in machining of lot of different materials, but, the most important volumes are reached in the machining of brass,stainless steel, steel and aluminium components. Unic also purchase rough material, as brass, steel or aluminium casting. In addition to different mechanical machining we are able to offer (thanks to external cooperation) treatments and surface finishes as for instance standard or chemical nickel coating, chrome plating, brushing, anodizing, the company is then able to supply a finished product as well as mounted groups. Unic is certified according to ISO 9001:2008. Is also available a catalogue for those articles produced by themselves related to the standard production referred to standard and automatic fittings, brass and stainless steel fittings, safety valves, taps and accessorizes.

USE THE RECOGNIZED HIGH QUALITY OF OUR PRODUCTS The name HEIWA Architectural Hardware has stood for over 30 years for reliability, quality and service. Develop even after more than three decades and we are technically advanced, hands-on fasteners and stampings and welded assemblies forth. All products are manufactured in accordance with the highest demands on quality of material and manufacturing quality exclusively in Germany. In close cooperation with our customers we are also complex desires and wishes in the form of individual custom. It starts with the expert advice and the exploration of the possibilities. After a short time we provide you with the pattern and then make your products from a variety of materials here. Our qualified and experienced staff can assist you: - In the assembly of modules - For welding jobs - For Punching - With mechanical operations and always in constant high quality. The in-house tool shop gives us great flexibility and rapid availability in the manufacturing, service and maintenance.

Since more than 40 years Mekanica Draghetti realizes high-precision mechanical workings. We produce and develop mechanical groups and components of all sizes, we carry out precision machining of all types and difficulties, quickly delivering and always certifying quality. Thanks to the use of the best technologies available on the market and the care that our highly qualified employees use every day in a modern and gratifying work environment, we achieve our only goal: the complete satisfaction of our customers.

Products Manufacturing, assembly and distribution of machined parts and assemblies from all machinable materials. Combinations of assembly of various components including welding works and adaptations. Rotating parts The rotating workpieces is the max. Turning length at 3000 mm. In the most modern CNC and NC lathes Precision turning parts can be made of the highest quality. Cubic parts On two machining centers can be machined up to 800 kg in three axes workpieces weighing. On the third machining center with NC rotary table can be machined in 4 axles workpieces weighing up to 300 kg. On the new machining center workpieces can be machined up to 1000 kg in five axes. Repairs without delay with laser welding technology: laser welding head-welded bodies without delay repaired parts ready for finishing Stripped threads new drilling / incorrectly drilled parts hard surfacing Repair of turning parts with laser welding without delay:

Engineering company with 65 employees in family ownership - Modern Locksmith up to 20t with welding robots - Large parts 5-axes simultaneously to 18.0 x 3.5 x 3.0 m / 60 to - 3D measuring machine - Painting and possibly assembly - Modern and efficient production - high flexibility - high quality

Aluminium foundry All major aluminum casting alloys Chill casting in gravity and tilt casting Sand casting HWS molding machine molding box size 850 x 650 x 250/250 mm Heat Treatment Steel shot blasting Vibratory Grinding Machining: milling to 5-axis machines and turning

We are a medium-sized family business, which has specialized as a system supplier for complex turned parts in the diameter range up to 40.00mm. In doing so, we meet all the challenges and demands of the current world of materials. The location, located between Stuttgart and Karlsruhe, is characterized by its excellent regional proximity to major car manufacturers and suppliers. Because customer proximity and communication are in the foreground with us.

We are an efficient company from Saxony with our own development and well-trained and experienced specialists in design and production. Since our foundation in 1992, the company has expanded continuously and we can refer to a large number of satisfied customers in Germany, Europe and all over the world. Convincing quality in production, extensive experience in the fields of tool making, forming processes, automation technology, special machine construction as well as apprentice training and further education are among our strengths. We manufacture mainly for the automotive and supplier industry, mechanical engineering, electronics and precision engineering, the construction industry and other industrial sectors. Translated with www.DeepL.com/Translator (free version)

Precision is our passion. With extensive expertise in machining various stainless steels, titanium, and plastics, we are the partner you need to bring your ideas to life. We use state-of-the-art manufacturing processes, regardless of whether the production run is small or large. We are here for you!