Our customers are offered everything they need within our group of companies, all in one basket: from development and project management via the production of tools for plastic and metal fabrication, through to manufacturing the parts. In this way we closely co-operate with our customers in developing functional structural plastic and metal components on the basis of the design, thereby achieving an optimum combination between plan, design, manufacture, and cost structure. The integrated possibilities have enabled us substantially to shorten the project run up to the point of series production. The systems Pro-engineer and Catia, available to our staff, permit the creation of structural components and tools, "in one casting" as it were. Injection Moulds Our staff in the individual manufacturing areas have state-of-the-art technologies and most up-to-date machines (such as 12-wire and 15-wire cavity sinking EDM machines) at their disposal. In producing moulds with a guaranteed number of shots, especially for the automobile industry and consumer electronics, our dictum is precision and quality. This holds true for injection moulds, diecasting, duroplastic, two-component, rotating, transfer and insert/outsert moulds, just as much as it does for two-colour moulds, combinations of hard and soft plastics, automatic wire leads, in-mould decoration, and precision gear wheels. Rapid tooling with the aid of our EOS metal sintering machine M250 Extended makes it possible to produce mould inserts for injection moulds and prototype tools within a very short time. Eighty moulding machines in Vienna and Hungary, with a clamping force of between 25 and 1,100 tons, offer all the possibilities of manufacturing moulded, thermosetting and duroplast, gas-injection moulded, two-component moulded, insert and outsert moulded, as well as in-mould decoration parts. Our machines are equipped with automatic robot systems, and automatic packaging lines complement the production line. Vienna: 3-shift operation / technical products and precision parts with a mould clamping force of up to 500 tons, Hungary: 4-shift operation / technical products and design parts with a mould clamping force of up to 1,100 tons. Your plastic parts are coated in three fully automated painting lines on a water-soluble basis (single-component or two-component coating). Your metal parts are electrostatically painted, from the smallest parts up to housing coatings for consumer electronics.

Customized solutions – We shape plastics As a reliable partner for the processing of high-performance plastics, we support you from the initial idea to the finished product. Our decades of experience and technical expertise enable us to develop customized solutions for a wide range of industries such as medical and electrical engineering, mechanical engineering, sanitary and water technology and the aviation industry. We rely on state-of-the-art technologies, including advanced simulation techniques and prototyping, to meet your exact requirements. Our flexibility in production and in-house toolmaking guarantee not only the highest quality, but also fast and efficient processes. Thanks to flat hierarchies and short decision-making processes, we are customer-oriented and offer you solutions that are tailored to your individual needs. Our passion for plastics technology and our commitment to innovation make us your ideal partner for the implementation of complex projects.

We are your partner from idea to series delivery As the world's leading manufacturer for the electrical and automotive industries, we supply our customers with high-quality products made of plastic, metal and kinematic components. Since our founding in 1939, we have continuously developed our experience and product knowledge in order to deliver only the best to our customers — quality and precision in plastic and metal. By using modern production technologies, it is our goal to tap into new growth markets and to be at your side as a permanent development partner.

We offer innovative solutions made of plastic and metal, from the precise manufacture of individual components to complex assemblies – everything from a single source, from development to series production. Our range of services includes injection moulding, machining, sheet metal working and welding technology, as well as the manufacture of tools and components. It extends from toolmaking and high-quality components to customised special vehicle construction and certified special protection systems that protect people worldwide. Customers from industry, medical technology, mechanical engineering, agricultural technology, the off-highway industry, railway technology, defence and many other sectors – including the automotive sector – rely on our experience and quality. With around 1,000 employees at seven locations in Europe and a modern machine park, we are ideally equipped for every task – and are sure to provide you with the right solution.

RUPF INDUSTRIES: Synergien einer starken Gruppe Die RUPF INDUSTRIES GmbH, eine mittelständische, familiengeführte Unternehmensgruppe mit Ursprüngen bis in das Jahr 1859, hat sich als international tätiger Akteur in den Geschäftsfeldern Fahrzeugtechnik, Hydraulik und Maschinenbau etabliert. Mit rund 900 hochqualifizierten Mitarbeitern an 10 Standorten (Deutschland, Osteuropa & Asien) erzielte die Gruppe im Jahr 2024 einen konsolidierten Umsatz von ca. 170 Millionen Euro. Heute ist die RUPF Gruppe stolz auf ihre Partnerschaften mit führenden OEMs und Tier-1-Zulieferern. Die RUPF INDUSTRIES GmbH verdeutlicht mit ihrer Unternehmensstruktur und den spezialisierten Tochtergesellschaften, das durch gezielte Synergien innerhalb einer starken Gruppe innovative und qualitativ hochwertige Lösungen für anspruchsvolle Kunden weltweit realisiert werden können. xing.com rupf-industries.com

The company was founded in 2008 "DSF" in North Lithuania is engaged in the manufacture of plastic parts by injection molding. We are happy to share our knowledge regarding the manufacture and design of plastic parts with you so that we can achieve the desired result in an optimal way. Our machinery consists of modern fully electric ENGEL injection molding machines which offer extraordinary level of precision with lower energy consumption and thus the quality and shape stability of the products. We have 1500 square meters of production area. The plastic parts can be manufactured according to our own forms or according to the customer's specifications. When necessary, the appropriate shapes can be manufactured. We back up our quality production with on-going process and operator control. Our services range from the development, construction, production to assembly and packaging. We invite you to know us. Send us an email or give us a call. We guarantee on-time delivery, reasonable prices, high quality and look us in advance to pleasant business.

As an innovative processor of thermosets - both in the press technique and the injection molding process - as well as high-quality thermoplastics, we put our decades of experience in the service of our clients. Maintaining the highest quality standards for our customers is our goal. The concerns of our clients are the center of our thinking. Responsible, objective advice in the interpretation of technical plastic parts and the selection of suitable materials is top priority for us.

JG AUTOMOTIVE: Developer and Supplier in the manufacture of metal parts JG Automotive was founded in 1982, dedicated to the manufacturing, development and supply of metal components for the automotive and industrial sector. Thanks to the mastery of the technologies of manufacturing of metal products specifications provided by clients, we have diversified the industrial sectors of performance and optimized our work processes. In 2002, together with 18 international partners, we created Global Alliance, a large group with 230 cooperative engineers, manufacturers in Brazil, Germany, China, India, Italy, Japan, Korea and USA, among others, managing a joint turnover of € 1,720 M. Dozens of companies in the automotive, energy, railway, agricultural, elevation, etc. sectors, are already among our customers and fortunately for us every year we continue to grow thanks to the trust of our customers and the incorporation of new ones. Our products are presented with their corresponding quality certificates (IATF / TS / ISO / CE / PPAP). In short Technology and high competitiveness in products to specifications provided by clients. TECHNOLOGIES: Forging, Casting, Machining, Stamping, Laser cut, Welding, Raw Material, Microforge, Microfusion, Fasteners, High Pressure Cylinders, Hydrogen cylinders for hydrogen filling stations, Toolings, Precision Bar Turning and Special Parts, Inserts and Profiles, Tubes SW and DW and Rod Formers, Springs, E-mobility, Precision Gears, Bearings, automotive plastic injection parts and Returnable packaging of metal parts.