Contract processing: CNC lathe - CNC milling - laser cutting of sheets and tubes - sheet metal bending - FDM printing

We can offer our customers the following range of services: - Construction - Manufacture of welded components in steel, stainless steel and aluminum - mechanical processing: sawing, drilling, turning, milling, grinding, eroding - Heat treatment: hardening and nitriding - Surface treatment: mass finishing, sandblasting, painting, powder coating, anodizing - Assembly of components and complete machines and devices

We are a company with a tradition dating back to 1974 in the metal industry. Only our assistant tells you a lot about our work. To date, we have gained a lot of experience in manufacturing gears, reduction gears and steel construction. Our work is based on modern development, employee knowledge, clear goals and our vision. We are looking for new opportunities in the development of and for the modern production of high-quality products. We put a lot of work into developing new, better machines with a longer lifespan. Due to strict environmental policy, we attach great importance to the use of environmentally friendly materials as well as environmentally friendly end products

GMB Srl was founded in 2013 by detecting Giustina and Monferrini Ltd., a company with over 50 years experience in the sheet metal working industry. The know-how and versatility of its staff, advanced technologies and the constant ambition to achieve higher quality standards, designed to meet the needs of its customers, make that GMB Srl is among the leading companies in Italy.

Spühl Production is much more than manufacturing parts for third parties. In addition to contract manufacturing, the offer includes the assembly of simple components to complex machines, purchasing and logistics, as well as sophisticated measurement technology.

SpleenWorks Welding Technology has been delivering high-precision metal fabrication and welding solutions for more than 15 years. Our facility in Berlin-Köpenick is equipped with a modern production hall, an 8-ton overhead gantry crane, premium Fronius welding systems and Siegmund welding tables to ensure maximum accuracy and repeatable quality. We place a strong focus on aluminium welding. Prototypes, small series, frame construction, welded assemblies and demanding special components are part of our daily work. With extensive experience and deep material expertise, we provide clean welds, controlled distortion and consistent results – even on thin-walled parts and complex geometries. In addition to aluminium, we also process stainless steel and steel with the same level of precision. Whether you require single-piece manufacturing or series production, SpleenWorks offers reliable execution, short communication paths and true master craftsmanship. For more insights, visit our website or follow us on Instagram.

We produce for you: - Welded structures made of mild steel and stainless steel V2A, V4A and aluminum using processes 135 and 141 - Pipeline construction - Plant engineering - stairs, balconies and railings - Edge parts up to 5 mm thick and 2700 mm wide - laser cut steel up to 20mm thick, stainless steel and aluminum up to 10mm thick, maximum dimensions: 2970x1470mm, - Sheet cutting steel up to 8mm, stainless steel up to 5mm Decades of experience also in the assembly of the above components, assembly throughout Germany

Metall Dollhopf is a family-run company with many years of experience in sheet metal processing. With modern machinery and a passion for metal, we process sheet metal precisely and reliably — from individual parts to medium-sized series. Our core competencies lie in the areas of: laser cutting Edging welding We attach great importance to quality, punctuality and personal customer service. As a flexible partner for industry and trade, we support your projects from drawing to the finished component. Metall Dollhopf - precision with passion.

Laser Cut GmbH Eislingen Your partner in sheet metal processing! We laser and bend aluminum, steel, stainless steel Everything from a single source.

The company was founded in 2008 "DSF" in North Lithuania is engaged in the manufacture of plastic parts by injection molding. We are happy to share our knowledge regarding the manufacture and design of plastic parts with you so that we can achieve the desired result in an optimal way. Our machinery consists of modern fully electric ENGEL injection molding machines which offer extraordinary level of precision with lower energy consumption and thus the quality and shape stability of the products. We have 1500 square meters of production area. The plastic parts can be manufactured according to our own forms or according to the customer's specifications. When necessary, the appropriate shapes can be manufactured. We back up our quality production with on-going process and operator control. Our services range from the development, construction, production to assembly and packaging. We invite you to know us. Send us an email or give us a call. We guarantee on-time delivery, reasonable prices, high quality and look us in advance to pleasant business.

SSI Schäfer s.r.o is a long-standing supplier in the areas of cabin construction (sheet metal enclosures), welding components including mechanical processing and painting, and component assembly. In Hranice, we process approx. 32,000 tons of steel per year on 75,000 m2 with just under 1,100 MA.

MBT Frankenberg GmbH is a competent partner in stainless steel processing and bending technology. The company manufactures precise components and assemblies to customer specifications and stands for reliable quality and clean workmanship. In the field of bending technology, its range of services includes in particular mandrel bending, ring bending, helical bending, and profile bending—delivering accurate solutions for a wide variety of applications and industries.

Industrial technology, mechanical engineering

When welding processes, our company offers the manual metal arc welding processes (111), metal active gas welding (135) as partially or fully mechanical process and tungsten inert gas (141) at. Processed materials are steels of material group 1.1, 1.2, 1.4, especially non-alloy structural steels according to DIN EN 10025, ie from S235JR S355JR up. Also aluminum structures can be produced. The processed metal thicknesses range from 3 - 50mm. The cutting of sheets or profiles mechanically (saw cut, hydraulic and manual scissors), thermal (oxy-fuel cutting) as well as subcontractors optically possible (by laser). Before welding processing of sheet metal they can be Transformed cold (edges, rolling). Lifting devices (2 x 8t, 10x1t / 0.5 t) in the form of cranes are available. Deformation of welded components can be compensated with the process autogenous flame straightening. The working areas of the metal glasses with the general steel construction with approval for crane rails and steel structures as well as the production of traffic signs bridges according to ZTV-ING part is prescribed 9, paragraph 1.

The company developing and manufacturing Eßbach was founded in Berthelsdorf 1999. Since April 2007, we relocated our headquarters to Brand-Erbisdorf. Here are covering an area of 750m ² various machining centers, design workstations and above average well-trained staff available with which we can also realize your tasks! Our high quality standards are certified by our certification to DIN ISO 9001. Examples of our products you can found in our website www.efe-essbach.de. Our main pillar is the development, production and distribution of heat sinks for power electronics. In addition to liquid cooling body systems based Unicool we also manufacture air-cooling systems of the body or combined devices after the system coldplate. Of course, we adjust the devices on your required specifications. Customers who use our products or benefits, include Siemens, Bosch, Baumuller, Bonfiglioli Vectron GmbH and Lust Antriebstechnik GmbH. In addition to the production of heat sinks, we operate a small special engineering. With this we are able to manufacture high quality facilities capable of over CAD design and CAD / CAM Interfaces. Thus, several different labeling systems to the standard product labeling including PDC connection were realized in our home. The investments are made entirely with control, and CNC-axes and delivered. Our customers can be found among others in the field of automotive and supply industry. Examples are: - Test benches for drive spindles with data acquisition - Labeling systems with freely programmable CNC axes 800x600x400 - Marking gear parts with interface to the PPS system - Devices for assembly and testing purposes - Molds for aluminum cast parts up to sizes of 800mm, including processing of castings when required - Special coolant systems for machine tools With our technology, we are able to realize customer-specific solutions, including the manufacture of parts and assemblies.Our machinery, we have expanded to operate and in particular the following machines: - 1 CNC machining centers with tool change 2000x800x800mm, internal cooling and swivel head - 1 CNC machining center 1000x500x400mm with tool changes and internal cooling - 1 CNC machining centers with tool change 500x400x400mm and NC rotary table - 1 universal CNC milling machine 800x400x400 (vertical and horizontal) - 1 CNC lathe, diameter 300mm long and 300 - Conventional turning up to 1000mm long - NC mandrel tube bending machine to D 26x2mm VA tube - Korundstrahlkabine for VA materials - Edelstahlbeizeinrichtung inside and outside - TIG welding workplace The CNC machines are connected to our CAD / CAM system and thus to work in a position to meet your or our drawings. Again, we have customers such as Heidelberger Druckmaschinen AG, Deckel Maho, Samputensili GmbH, Bharat Forge Aluminum GmbH & Co.KG or Licatec GmbH.

Paul Brüser GmbH is a medium-sized family business based in Sauerland. Whether punching, drawing or welding, plastic injection molding, tool and prototype construction, Paul Brüser GmbH is your reliable partner. Our experience in a wide range of areas pays off. Through metal processing, plastics processing and component manufacturing as well as our own tool making, we manufacture products individually and flexibly according to your requirements. What you can expect from us: Flexibility — In any situation, we are happy to adapt to the tasks you have set and can develop qualified solutions. Quality — Strict controls ensure the safety and quality of our products. You can rely on our work. Service — We are always open to your concerns and wishes and provide you with efficient and professional advice on the implementation of various concepts.

As an innovative processor of thermosets - both in the press technique and the injection molding process - as well as high-quality thermoplastics, we put our decades of experience in the service of our clients. Maintaining the highest quality standards for our customers is our goal. The concerns of our clients are the center of our thinking. Responsible, objective advice in the interpretation of technical plastic parts and the selection of suitable materials is top priority for us.

We give ideas form The expanding company founded in 1999, comprises today with its 96 employees on 13.000m ² production area a wide range of manufacturing technologies and services. From design / development to the finished end product refined in strict compliance with all certified processes, methods and environmental issues we face as a competent supplier to all sectors of industry and crafts available. Precise, competent, innovative, there is the strong team of MVK from metal processing. As a long-term proven suppliers from all areas of metal processing, we know, to meet the increasing demands of our customers. Reliability, precision and competence are implemented in our plant to 13,000 m² with 96 highly motivated employees with a modern machine park daily. With perfectly optimized solutions from the CAD development to final product, we provide us with your challenges in all sectors of steel, stainless steel and aluminum processing. Whether laser or water-jet cuts for sheet metal tube punching, rolling and edging work, welding with robots or with proof assembly production or complete system solutions: We are here with the latest technology and a high degree of flexibility and creativity for you.

ZIEGLER – a successful family business for three generations, with headquarters in Bavaria and a manufacturing facility in Daugavpils, Latvia. ZIEGLER manufactures to order according to customer requirements and project specifications. We also offer our customers material procurement for their specific projects: welded assemblies, bent parts, assembly work, painting, and logistics.