As a long-standing supplier of well-known German OEMs, we are mainly engaged in the production of individual body parts and assemblies through to ready-to-paint hang-on parts. In doing so, we can represent almost all steps of product development in-house: - Method planning and forming simulation - Tool and equipment design and production in-house - Manufacture of individual sheet metal parts and sub-assemblies made of aluminum or steel - manual or robot-assisted production of complex assemblies (e.g. side doors, front flaps, tailgates, spoilers, tank and load hatches, etc.) Our flexible and experienced employees as well as universal manufacturing systems enable us to economically represent both prototypes and small and medium-sized series of large parts (car sidewall, floor groups). Even in the high-volume sector, we support our customers with smaller components (e.g. tank and loading hatches). Of course, we also have sufficient experience and the technical capabilities to implement manual joining technologies, such as resistance point, MAG, MIG, TIG welding, nut and bolt welding, punch riveting, clinching, roll folding, gluing, etc. With our manual transfer large and servo-hydraulic transfer presses including decoiling system and circuit board cleaning, 3D lasers, universal robotic systems, a CNC-controlled shell furnace and also the finishing of outer skin components, we believe that the ideal conditions are available to also take over your component supply. We are also happy to answer your inquiries about production relocations or spare parts production after series production has ended, with downstream KTL coating from long-standing partner companies if required. Components for metal chair furniture (metal seat shells/frames) round off our portfolio even outside automotive production.

Production, development and sales of parts, assemblies for machines, special machines and plant. Specifically: welded assemblies, weldments, metal, machine components in the salary, mechanical engineering, welding in wages, metal / steel construction

The J. van Walraven BV was founded in 1942 and is a privately held company. We develop, produce and distribute innovative fastening, fire protection and plumbing systems. Currently, the Walraven Group consists of the holding company and 18 other subsidiaries. Organization of the group Product systems Our range is clearly divided into three areas: BIS fastening systems And much more fixing materials for heating, ventilation and sanitary installations as well as for sprinkler pipes, air ducts, electrical cables, cable trays BIS Fire Protection Systems Solutions for fire resistant and smoke gas-tight sealing of pipe and cable penetrations. As well as fire protection certified support products. BIS Sanitary Systems Sanitary pretext frame for fixing of toilet bowls, urinals and washbasins. Special BIS Vario ®: Electric or mechanical height adjustment! Ultimately Sanitary Silicones and Sealants ... Distribution In Europe, and particularly in Germany Walraven has a huge market share in the attachment area.Walraven products are used by thousands of installation companies in Europe, America, Asia, Australia and the Middle East. Safe Connection Walraven is one of the founders and member of the 'European Quality Association for pipe mounting eV' (safe connection). The composite consisting of numerous major manufacturers of Pipe fixing market, has established comparable, transparent policies regarding the testing procedures of load values. Advantage for planners and craftsmen: a more reliable and easier planning. The 'Quality Association pipe fixing' was 2003 eV from the "RAL", the German Institute for Quality Assurance and Certification, recognized. Quality labeling J. van Walraven Holding BV is ISO 9001; 2000 certified Production After 71 years of experience in the production of pipe fastening systems, Walraven can look at a tool and machine park, which is located at the highest technical level, and thus allows absolutely competitive production processes.. Production includes cutting, shaping and cutting of sheet metal and metals. A fully automated rail manufacturing to galvanizing and automatic packaging. Bzgl. Metal Stamping: Here we have more than 30 different presses with different benefits (force values 45-130 tons and speed between 20 and 150 ejections per minute). Ultimately Walraven can look back with pride on its own and full grown continuously tool shop, so that developments always even, safe and fast can be implemented.

ZAKO bring ideas into form. ZAKO metal technology offers the entire range of sheet metal processing, from the board to complex assemblies, from single parts to large series. We stock and process sheets of various varieties and strengths. Perfect planning. Experienced designers and engineers create with impressive 3D design tailor-made solutions for your projects.Competent and creatively makes ZAKO ideas perfect products. We are customer focussed, flexible, fast and reliable. Technology that inspires. The latest CNC laser technology and a fully automated high bay warehouse are also in use as punching technology, press brakes, welding robots and innovative Entgrattechnik. All this guarantees the best possible quality and efficiency. ZAKO - before we finished. Tags Sheet metal, engineering, sheet metal work, sheet metal processing, metal, metal art, metal processing, metal processing, laser cutting, laser cutting, laser processing, laser technology, punching, punching, punching technique, deburring, deburring, bending, Bending, bending, bending technology, riveting, riveting, riveting, clinching, clinching, welding, welding, MIG, MAG, TIG, contract manufacturing, contract manufacturing, steel, stainless steel, aluminum, sheet steel,

Dear Ladies and Gentlemen, please allow me to introduce the company DW Special Parts in this way. We are a modern young rapidly growing company, customer-specific solutions in the field of  CAD - Service  Drawing evaluation  Project documentation  turning & milling parts  grinding & polishing technique  From individual parts to series specialized. Our strengths lie in the rapid and individual conception, design and implementation of turned and milled parts. We can respond very quickly to customer requests. We are proud to provide our customers always satisfied with highest quality, reliability and punctuality. We would be pleased to be invited to your calls and to take part in the competition. Sincerely yours Dennis Wiegand DW Special Parts Special Production

We have a broad technology knowledge for cutting, welding, brazing and hardening with the laser beam. This we use both in contract manufacturing and engineering projects as well as engineering for our customers. We offer Twelve-modern laser systems, equipped with self-developed technology and process monitoring systems Engineering, contract manufacturing and engineering from a single source Quality Management System according to DIN ISO 9001 -Extensive experience in process development and mass production

Fa. Per-met was founded in 2014 and specializes in all machining operations as well as welding and assembly activities. With our vast experience and young motivated it is possible to show us at the present market. Quality is required. We attach particular importance because it reflects our flexibility in meeting the delivery date. No part is too small or too large. Do not go, there's not (almost).

The Schulz Conveyor Systems GmbH with its seat in Gräfenroda was founded by Mr. Peter Schulz 1991st Immediately after the foundation began to invest in the latest technologies. Aided by the laser cutting technology, which had its technical breakthrough early 90s, the clientele, and thus the company grew rapidly. Within just a few years on the former site of an old glass factory an advanced sheet metal manufacturing. After the laser technology also held technologies such as the folding and welding feed. In 1997, Schulz conveyor systems GmbH took over part of the Gothaer Fahrzeugwerke. Thus opened up for the company, a new line of business - the automotive industry. Today the company Schulz conveyor systems GmbH is a solid medium-sized company, which adapts through a flexible, broad-based manufacturing processes and the rising and volatile market conditions and requirements.She specializes in the manufacture of welding and assembly, as well as laser and metal parts. To continue in the future success of the company in the usual manner, the following business objectives: Ausbau and consolidation of market position Fertigung highest technical level Lieferung best quality Automatisierung manufacturing Erhöhung of technical, professional expertise to assist customers with constructive issues and cost reduction Erhöhung production depth

The company Inox – Bramar Ltd. is one of the pioneers in the production of stainless steel constructions for marine and architecture in Croatia, with an experience of 35 years. Main branch is design and production of stainless steel constructions for buildings, interior design and maritime applications and laser cutting service with 4kW fiber laser. We have good longterm colaboration with leading companies in shopfitting industry.

Stahbaul and metal processing plant. metalworking

The company Edel & Stahl GbR is a medium-sized metal company specializing in steel, stainless steel and aluminum processing in the following trades. • Metal • Steel construction • plant • Mechanical engineering • Vehicle construction • individual structures of steel, stainless steel and aluminum Our Master and welding workshop is certified according to DIN EN ISO 9001: 2008, DIN EN 1090 EXC 2 and DIN EN ISO 3834-3

Manufacture of metal parts and assemblies Service: joint development and manufacturing from small to large series Processing of various metals (steel, stainless steel, aluminum, copper, brass, bronze) Metal thickness from 0.1 mm to 6 mm Versatile machinery Additional facilities for welding and joining 75 employees 15 staff in the project team 09 employees in the tool shop 04 employees in the Quality Team Sales Office in Frankfurt iso 9001 certified 96% service rate

We are a company specializing in the production of metal and PVC details, we have our own tool room and our own galvanizing plant

IN.CO.M. Srl is a family company based in Italy, in the Marche region, in the Province of Ancona. Founded by Mario Campolucci in the 60s, it was born as a small workshop to grow steadily to become a reference point for the construction of industrial machine components, semi-finished products and carpentry work in stainless steel, iron and aluminum. From sheet metal laser cutting to final treatments, through assembly and welding. In 2020 the company is managed by Matteo, Giovanni and Mario Campolucci (members of the board of directors and president) and is a long-term supplier for some of the major companies in the agricultural food sector and in various other industrial sectors such as the packaging industry , medical, chemical / pharmaceutical and special waste management.

GEOTOM SIGTECH  is a Romanian company which is manufacturing welded and machined mechanical parts and sub-assemblies for French and Swiss companies.

YOUR PARTNER FOR COMPLETE STAINLESS STEEL INDUSTRIAL SOLUTIONS Metal’s: stainless steel processing We process stainless steel. We develop, manufacture and assemble complete systems, machines and devices according to your projects. Thanks to our in-depth knowledge of raw materials, we implement your specifications in various production processes and manage the entire logistics flow. The service offered by us guarantees great advantages, especially the centralized processing of complex projects with a single point of contact: Metal’s! We process more than 3,200 tons of stainless steel per year. Our factory is located in Borgoricco, in the province of Padua, and covers an area of 21,000 square meters. This is where we manufacture complex assemblies at an advanced stage of assembly and semi-finished products made of stainless steel. Metal’s is certified ISO 9001, ISO 14001 for environmental management and ISO 45001 for workplace safety. Our production process is flexible and reliable, aiming at providing you with complex assemblies and semi-finished products made of stainless steel, exactly when needed and in the quantities required. From cutting to assembling, our process adapts to any sector. It begins with the raw material control and proceeds with the industrial cycle phases which are divided into first processing and finishing, responding from time to time to strict quality standards. Our machines work 24 hours a day, 7 days a week. Complex finishes are entrusted to our most expert technicians, in order to get functional and very finely designed products.

With around 30 injection molding machines ranging between 40-200 tons of feed, rekuplast GmbH is the perfect partner for manufacturing components with an injection weight of 0.05 to 500 grams. Our machinery consists primarily of Arburg and Demag Sumitomo machines. This puts us in an excellent position in terms of accuracy and reliability. This is also reflected in our permanently statistically monitored machine and process capabilities. In our injection molding production, we produce quantities of 100 to 40,000,000 pieces per year for individual parts. In higher quantities, the processes are fully automated, depending on the complexity of the component. To ensure perfect series quality, every component is produced with the suitably configured machine. The feed and screw ratio are optimally tailored to the component — without compromise! Compliance with specified process parameters is a matter of course. Our organization is structured in accordance with the 5S philosophy in terms of order and cleanliness. In doing so, we attach great importance to a targeted material flow and use a portal conveyor for this purpose, which connects production with storage and shipping. This ensures FIFO and batch traceability, from raw material to delivered component.

The purpose of Kayaden Makina is; to contribute to the progress and development of the Machinery Manufacturing Sector together with other sub-sectors, to play an active role in the formation of all sectoral policies and applications related to the Machinery Industry, to strengthen the Sector in global competition by developing together with the sub-industry, to create an attitude open to solidarity and cooperation with the broad and democratic participation of sectoral organizations and a method approach targeting sectoral integration; It serves the Iron and Steel, Automotive, Glass Industry and Food sectors with its cutting-edge CNC Processing Center and Lathes and Universal Group Machines in Machining and Steel Construction processes in a 2000 m2 closed area with 35 employees.

We are a reliable partner for quality and precision metal fabrication and metalworking at competitive prices. Thanks to our strategic location in the heart of Europe, the many years of experience of our team and modern technology, we provide a wide range of services from design through production to on-time delivery.