MPP solutions GmbH

Germany, 72175 Dornhan

Competencies

Technologies

Injection Moulding, Extruding

Technologies	Lotsize	Length	Width	Height	Weight
Injection moulding	1–5 M	0.1–2,000 mm	0.1–2,000 mm	0.1–2,000 mm	0–500 kg
Extrusion (profile)	100–5 M	—	0.1–10,000 mm	0.1–10,000 mm	—
Injection-mould around inserts	500–5 M	1–2,000 mm	1–2,000 mm	1–2,000 mm	0–15 kg
Multi component injection moulding	500–5 M	1–2,000 mm	1–2,000 mm	1–2,000 mm	0–15 kg
Transfer moulding	500–5 M	1–2,000 mm	1–2,000 mm	1–2,000 mm	0–15 kg
Foaming	500–500,000	1–1,000 mm	1–1,000 mm	1–1,500 mm	—
Extrusion blow moulding	500–5 M	1–2,000 mm	1–2,000 mm	1–2,000 mm	—
Compression moulding	500–5 M	1–2,000 mm	1–2,000 mm	1–2,000 mm	0–15 kg
Rotational moulding	500–5 M	1–2,000 mm	1–2,000 mm	1–2,000 mm	—

Mould construction

Technologies	Length	Width	Height	Weight
Injection moulds	1–1,000 mm	1–1,000 mm	1–1,000 mm	0–1,000 kg
Pressure die cast molds	1–1,000 mm	1–1,000 mm	1–1,000 mm	0–1,000 kg
Gravity casting moulds	1–2,000 mm	1–2,000 mm	1–2,000 mm	0–15 kg
Modelmaking	1–1,000 mm	1–1,500 mm	1–1,500 mm	0–50 kg
Squeeze moulds	1–2,000 mm	1–2,000 mm	1–2,000 mm	0–15 kg
Sintering	1–2,000 mm	1–2,000 mm	1–2,000 mm	0–15 kg
Extrusion dies	1–2,000 mm	1–2,000 mm	1–2,000 mm	0–15 kg

Assembly

Technologies	Weight
Mechanical assembly	0–1,000 kg
Electromechanical assembly	0–50 kg
Industrial / On-site-assembly	0–50 kg

Sintering & Powder Pressing

Technologies	Lotsize	Length	Width	Height	Diameter	Weight
Sintering	500–5 M	1–2,000 mm	1–2,000 mm	1–2,000 mm	1–1,000 mm	0–10 kg
Metal injection moulding (MIM)	500–5 M	1–2,000 mm	1–2,000 mm	1–2,000 mm	—	0–15 kg

Casting

Technologies	Lotsize	Length	Width	Height	Diameter	Weight
Machine moulding (sand casting)	500–5 M	1–2,000 mm	1–2,000 mm	1–2,000 mm	—	0–15 kg
Gravity die casting	500–5 M	1–2,000 mm	1–2,000 mm	1–2,000 mm	—	0–15 kg
Pressure die casting	500–5 M	1–2,000 mm	1–2,000 mm	1–2,000 mm	—	0–1,000 kg
Investment casting	500–5 M	1–2,000 mm	1–2,000 mm	1–2,000 mm	—	0–10 kg
Low-pressure casting	500–5 M	1–2,000 mm	1–2,000 mm	1–2,000 mm	—	0–15 kg
Hand moulding (sand casting)	500–5 M	1–2,000 mm	1–2,000 mm	1–2,000 mm	—	0–15 kg
Continuous casting	500–5 M	—	1–2,000 mm	1–2,000 mm	1–2,000 mm	—

Etching and Spark Erosion

Technologies	Lotsize	Length	Width	Height	Diameter	Weight	Material thickness
Spark erosion wire cutting	200–5 M	1–10,000 mm	1–10,000 mm	1–10,000 mm	—	0–15 kg	—
Spark erosion countersinking	200–5 M	1–10,000 mm	1–10,000 mm	1–10,000 mm	—	0–15 kg	—
Laser removing	200–5 M	1–10,000 mm	1–10,000 mm	1–10,000 mm	—	0–15 kg	—
Chemical deburring	200–5 M	1–10,000 mm	1–10,000 mm	1–10,000 mm	—	—	—
Thermal deburring	200–5 M	1–10,000 mm	—	—	1–100 mm	0–15 kg	—
Electrochemical machining (ECM)	200–5 M	1–10,000 mm	1–10,000 mm	1–10,000 mm	—	0–15 kg	—
Etching	200–5 M	1–10,000 mm	1–10,000 mm	—	—	—	1–10,000 mm

Additive Manufacturing

Technologies	Lotsize	Length	Width	Height	Weight
Fused deposition modelling (FDM)	1–500	1–400 mm	1–400 mm	1–600 mm	—
Electroforming	500–500,000	1–1,000 mm	1–1,000 mm	1–1,000 mm	0–10 kg
3D printing (general)	1–5 M	1–2,000 mm	1–2,000 mm	1–2,000 mm	—
Stereolithography (SLA)	0–5,000	0–200 mm	0–250 mm	0–300 mm	—
Vacuum casting	0–5,000	0–2,000 mm	0–2,000 mm	0–2,000 mm	0–10 kg

Forming (Plastics & Rubber)

Technologies	Lotsize	Length	Width	Height	Weight	Material thickness
Thermoforming	1–5 M	1–1,000 mm	1–1,000 mm	1–1,000 mm	0–500 kg	1–1,000 mm

Turning

Technologies	Lotsize	Length	Diameter
Full-range turning (including milling)	500–5 M	1–2,000 mm	1–2,000 mm

Cutting dies / deep drawing dies

Technologies	Length	Width	Height	Weight
Deep-drawing dies	1–1,000 mm	1–1,000 mm	1–1,000 mm	0–500 kg

Milling

Technologies	Lotsize	Length	Width	Height	Diameter	Weight
Milling	500–500,000	1–1,000 mm	1–1,000 mm	1–1,500 mm	—	—
5-axis milling machines	500–500,000	1–1,000 mm	1–1,000 mm	1–1,500 mm	—	—
Form milling (3 D)	500–5 M	1–1,000 mm	1–1,000 mm	1–1,500 mm	—	—
Full-range milling (including turning)	50–500	1–1,000 mm	1–1,000 mm	1–1,500 mm	1–50 mm	—
HSC milling	1–1,000	1–1,000 mm	1–1,000 mm	1–1,000 mm	—	0–100 kg

Surface Treatment

Technologies	Lotsize	Length	Width	Height	Diameter	Weight	Material thickness
Electroplating	500–5 M	1–1,000 mm	1–1,000 mm	1–1,500 mm	—	0–50 kg	—
Powder coating	500–500,000	1–1,000 mm	1–1,500 mm	1–1,000 mm	—	0–50 kg	—
Sand blasting	500–500,000	1–1,000 mm	1–1,000 mm	1–1,500 mm	—	0–50 kg	—
Galvanizing	500–500,000	1–1,500 mm	1–1,500 mm	1–1,000 mm	1–50 mm	0–10 kg	1–50 mm

Materials

Steel

Structural steelCase hardening/tempering steelStainless steel (rust-proof V2A)Stainless steel (rust-proof V4A)Free-cutting/mild steelTool steelSpring steelCold extruding steel

Cast metals

Cast steelCast iron

Plastics/synthetic materials

ThermoplasticsAcrylic (PMMA)High performance plasticThermosetsElastomersSilocone (LSR)Natural and vulcanised rubberGlass fibre-reinforced plasticCarbon fibre-reinforced plasticParticle reinforced composite materialsWood-Plastic-Composites (WPC)Natural Fibre Composites (NFC)

Advanced Materials

Nickel alloy (Inconel, Monel, Hastelloy)CarbideSilicium

Light metals

Aluminium and aluminium alloysMagnesium and magnesium alloysTitanium and titanium alloys

Sintered materials

Metal powder for formed partsMetal powder for hard metal

Heavy metals

Copper-zinc alloys (brass)Copper and copper alloysZinc and zinc alloysSolder

Precious metals

Other precious metals

Industries

Fittings engineeringBuilding, agricultural and forestry machinery manufacturingRailway and rail vehicles industryHousehold appliance industryPackaging industryAutomotive and vehicle constructionSpecial purpose machinery manufacturingClean room technologyShipbuilding industryPaper and printing machinery industryMilitary engineeringBoiler, container and tank construction Aerospace and aviation industryInformation technology (hardware)Chemical industryMining and tunnel engineeringElectrical industryApparatus engineeringTelecommunication industryPower generation and transmission industryConstruction and architectural suppliesMachine tool manufacturingHydraulic and pneumatic industryAutomation and control engineeringDrive and gear engineeringFurniture industryMeasurement and control technique, laboratory equipmentMedical technologyAir conditioning, refrigeration and ventilation industryPrecision engineering, mechatronics and opticsOffice machinery and suppliesLighting industryMechanical engineering

+25 moreShow less