The company Ernst Zieker GmbH was founded in 1955 by Mr. Ernst Zieker. Since the year 1955, we produce for you Präzisionsdrehteile different type and form of the highest quality according to your data, drawings, sketches, ideas or ideas. A high degree of innovation, best material and market knowledge, as well as the famous the bigger matter of course for us. Our main areas are turning parts of the rod decreases. approximately 1,000 pieces per order, from 2 mm to 65 mm. Quality assurance is based on the ISO 9002 standard. 1997 an audit was prepared by an independent auditor (actual analysis for certification).

Dear Ladies and Gentlemen We would like to introduce our company Metal-Comerce from Serbia. Our company produces all kinds of high quality components made of steel, aluminum and non-ferrous metals. We work exclusively for export. We have 5 employees and have been on the market for over 28 years. If you are looking for a new partner that is cheap, delivers high quality and meets delivery times, then you are in the right place! We will gladly send you our list with the current machinery, as well as a short description about us. We would be very happy about your inquiry. Try us!

With more than 200 engineers, technicians, masters and qualified technical specialists in the team, Dr. Hager the business of MainTech Systems. The high status of the industrial location testifies to a decades-long tradition: The location was founded in 1924 as a production facility for textile viscose yarns of the Vereinigte Glanzstoff-Fabriken AG. In 1938, the production of technical viscose yarns began, which were mainly used as a reinforcing material in the carcass of car tires. In the 1950s, fiber production was expanded to include synthetic yarns such as polyester and polyamide. Since the 70s and 80s of the 20th century, the location has increasingly developed into the most important European production facility for high-quality yarns for technical applications due to the expansion of capacities. For many decades the location in the Bavarian Lower Main was the largest employer in the region. As a result, the ICO is of central importance for the structural and economic development of the entire area to this day. In its almost 90-year history, when the parent company changed its name - from Glanzstoff to Enka, Akzo Nobel, Acordis - the name of the location also changed until 2003, when the neutral name “Industrie Center Obernburg” was chosen. The background to the last change was the split up of the previous business areas of the Acordis Group and their separate sale. The former group branches located in the ICO were converted into legally independent GmbHs. The site operating company of the ICO is "Mainsite GmbH & Co. KG", which offers all the infrastructural services required for a technological production site. In 2010, the technical services of Mainsite GmbH & Co. KG were spun off into the independently operating subsidiary Mainsite Technologies GmbH. Due to its technical competence, this company has developed into an innovative plant construction company as well as a service and maintenance company.

Individual, small series and custom-made stainless steel turned parts We have modern machinery at our disposal for individual, small series and special production of stainless steel turned parts in diameter ranges from 5 to 1400 mm. CNC lathes 2x turning diameter 550 mm x 1500 mm turning length 1x turning diameter 650 mm x 1500 mm turning length 1x turning diameter 830 mm x 1500 mm turning length 1x turning diameter 1450 mm x 1700 mm turning length CNC vertical machining centers 1x 1100mm x 650mm x 600mm 1x 1600mm x 850mm x 700mm Conventional lathes 1x turning diameter 670 mm 1x turning diameter 1000 mm Benefit from our high quality standard through modern machinery. Adherence to deadlines and speed are a matter of course for us. Do you have any questions? We are always at your disposal for further information.

Company founded in 2011. 4 CNC Lathe machining up to 20mm diameter. Equipped with high frequency milling up to 60'000 rpm. High pressure pumps 150 bars. Specialised in complicated parts and exotic materials.

Our company was founded in 2011 as an R&D branch of LLC “Nasostechkomplect”. Together with main company, we have 15 years of experience in design and production of high quality flexible and gear couplings with diameter up to 410 mm for Ukraine and Russia market. Some of our flexible couplings are successfully working on Zaporizhia and Kursk nuclear power plants. Moving further, from 2014 year we have made a strategy to enter to European market with our products and services, giving possibility to our customers to take an advantage of our reliability, high quality and reasonable prices. Now we wide our activity to automatization of various proceses in mechanical manucaturing and food industries. Our team can make complex projets of automated production line with various level of automatization, iincluding loading/unloading, conveyors, mixing boxes, packeging. We advantageously combine mechanics and electonics in our products. Now we can also offer machinig of metal an plastic parts by - Turning; - Hard turning; - Milling; - 4.5x milling; - Assembling of apparatus by welding, bending etc.

We are a produktions company with complex solutions covering CAD design, machining, assembly, electric works and programming for special machines. We are continuously developing our factory with the newest technologies to offer our customers the best possible quality, with a correct price and precise delivery dates. We are ready to support our customers with an experienced enginneer team and CNC technicans. Our monthly capacity is about 1000 hours in CAD and 2500 hours for machining and metalwork.

The Hohenroth workshop for disabled people (WfbM) manufactures precision parts made of plastic, ferrous and non-ferrous metal for the automotive and electrical industries, mechanical engineering and medical technology. We have a versatile and modern machine park that leaves nothing to be desired by our customers. We are certified according to the ISO 9001 industry standard. Our high quality standard is ensured by CNC machines, suitable measuring equipment, measuring computers and qualified specialists.

Make AG - quality that arrives. For over 60 years, we have confirmed ourselves as a provider of Swiss precision mechanics. We manufacture quality products to measure and according to standard, with different materials and coatings. Thanks to our own developments, the latest technology and great technical experience, our products meet the highest customer and quality standards.

Maso attend to direct contacts with the foundries and gives the customer to pick up the possiblity, his requirements for all steel castings as well as Grey cast- and Spheroidal graphite cast iron, Aluminium and its alloys castings directly with it with the supplier in Turkey and China. Unknown intercession offices slip it. As production processes to the disposal are Sand casting -machine moulding, investment casting, die-casting for low, middle and big deries, roughly and ready processes. Maso takes over the first sample care until the series maturity. The customer can order directly after it. The same profile offers Maso for drop forged parts, sheet metal stamping parts and vehicle rims.

In our, in 2000 newly opened modern requirements of production and rehabilitation justice to the workplace, we produce under the expert guidance of qualified engineers, foremen and skilled workers in two buildings with more than 200 disabled and non-disabled employees for the industry in the areas of: - Industrial and electrical installation - Metal processing - Plastic manufacturing and processing - Packaging and packaging Our services are in accordance with § 55 SchwbG creditable against the countervailing charge with 50% of net job performance.

CNC turning, diameter from 400 to 1500mm length CNC milling X760y380z500 Translation by Google Translate

The life coaching Chemnitz eV was founded on 23.06.1990. It currently has 240 members and supervised in the various facilities about 450 people with intellectual disabilities. The workshops are facilities for the participation of disabled persons in working life. They integrate people who do not, can not, or not yet again be working in the open labor market because of the nature and severity of the disability. In the workshops, a training area is available. Our range of services: Electric field: Production and assembly of electronic components, assembly of components and devices, disassembly of assemblies and electronic components, inspection and testing activities to customer and preparation of components Equip the production of individual components of different modules, complex assembly (brake and fan modules), quality control, packaging and heatsink with components: Installation Packaging and assembly: Compilation of clothing bags and packaging, production of cardboard and overpacks and control Preparation of components: bending (grid, expand or-Narrow), beads (simple or twisted), Shortening, apply fabric hose, apply heat shrink tubing and shrink, Ausgurten of axial or radial taped components, Manufacture of wire bridges Metal Machining: Machining (turning, milling, drilling, reaming, tapping, grinding and deburring), welding (spot welding), Abkantarbeiten and bending work Post and promotional products Laundry and linen finish Sewing Bookbinding In construction injection area (multi-component injection molding and insert molding) Clamping force range 150-180 t. Laser cutting and laser engraving (no metals)

As a contract manufacturer, Walter 3-C-Technik GmbH & Co. KG has many years of experience in the areas of machining, welding, assembly and construction. We offer complete processing from machine components and assemblies to complete machines. The highly qualified specialists and managers ensure maximum flexibility and punctuality for our customers. State-of-the-art production facilities and work processes guarantee high quality, efficiency and value for money. We see ourselves as your competent and reliable parts supplier, service provider and companion from design to raw part to finished part, in welding, metal cutting and assembly to machine assembly.

Workings begin with co-design together with the customer, continuing with the in-depth study of the work cycle, the choice of additional materials and treatments to be carried out to the realization of the prototypes. Production is supported by careful process control. In addition, all stages are interwoven with washing machines performed with ultrasonic machines to avoid any residue inside. The packaging and shipment arrangements are made according to the specific requirements of the customer, thus guaranteeing the absolute protection of the product.

The ROTEC GmbH, a medium-sized company, providing high-quality rotary parts from all machinable materials for the automotive industry, mechanical engineering and other industries forth. About us The ROTEC GmbH itself was founded in September 2004, but still looks back on an experience of over 30 years. Manfred Keck founded in 1973 started a company and developed this into a specialist for multi-spindle cutting operations. Today we can build on a salaried workforce of over one hundred employees and feature a well-equipped machine park. Visions are our top priorities. The sustained success of ROTEC based on the following factors: many years of industry experience and expertise consistent focus on quality Flexibility through its own tool manufacturing Sonderprüfvorrichtungen independent development of multi-spindle and Automation multi-spindle special solutions short changeover times Innovativeness ROTEC - A team with experience and ambition to break new ground and to fall back on tried and true. Vision & Goals Our vision is to use innovative technology to develop cost advantages, which are our customers and of use to us. The customer is the center Our goal is to strengthen our customers, by giving them competitive advantages. The success of our customers is also our Erfolg.Wir offer our customers tailor-made solutions for individual needs. With our aim to give the best everywhere, we are constantly working to improve our quality and processes in the company.

Family-owned company with own toolfabrication and own production.

A HEARTFELT HELLO! It's nice that you're here Hans Sack Edelstahl- & Behälterbau is your trustworthy partner for tailor-made stainless steel structures, container construction, steel construction and precise single-part manufacturing using CNC machines. Our company is based in northern Germany, in Flensburg, and is characterized by many years of experience and a strong commitment to quality. We are proud to offer high-quality solutions for a wide range of applications.