GGG is an expert in the manufacturing of high-precision CNC machined components and sub-assemblies for the commercial industries. We produce the items based on client's documentation.We offer a wide range of services from machining a single part, prototype through running regular volumes production, to developing and manufacturing complete device or machine. Over 75% of our production output is exported. GGG is a private family owned and managed, contract manufacturing company with 6Mo. Eur turnover. In-house capabilities include: 1.CNC machining - 35 machines • Precise CNC turning and turning/milling – 13 units (from small parts up to 1000mm-1900mm long) • Precise CNC machining /milling/drilling – 3axis, 4 axis, 5 axis machining - in total 22 units (ultra-precise, fast multi-axes machining centres, large vertical machining centres with travel XYZ 1700x860x750) 2. Deep hole drilling - 2 machines – inner hole diameter from 2mm up to 100mm while parts length up to 2000mmm, we achieve outstanding tolerances and surface finish! 3. TIG and MIG welding, carbon and stainless steel. 4. Sheet metal fabrication and bending. 5. Qualified Mechanical assembly. In addition, we have several measuring machines, incl. CMM machine Wenztel to perform necessary measurements. We do perform statistical process control in our production. We are ISO 9001:2000 certified since 2003. We have expertise in adapting to individual clients requirement, the company is project oriented. For the strategic project we run production adopting Focus Factory concepts. We machine various types of steel, aluminum, inconel. We source material ourselves in Eastern and Western Europe. We have experience in compelx projects requiring developing casting moulds, forging dies etc. Feel free to contact us today to learn more about what we can do for you!

- Machining of high-precision drawing parts (turning and milling) Sleeves, housings, covers, receptacles, holders, SMA - Prototyping and Massproduction - Al, Brass, Cu, VA, Ti, Mg - specialized in optics & lasers - overnight manufacturing - mounting of assemblies - supplyer of thermoelectric modules (TEC-Peltier.Modules)

Workshop for the Disabled of Special Education Centre Irchenrieth eV For over 30 years in charge of the special education center for disabled eV people with special needs. At our institution, therefore, also includes its own workshop for the handicapped (WfB). This can compete with the private sector is well - both technical and human resources. We are equipped with advanced computer-controlled machines and employ both in the care of the disabled employees / inside as well as the planning and organization of production exclusively professionals. Great is the bandwidth of our production. We take orders from the fields of metal, plastic, electric and wood, but are prepared for work in fixture and mold construction. The WfB is therefore quite an attractive and efficient business partner. We offer quality and service!

Manufacture of machines and undercut parts - Diameter of 2 to 60 mm in bars - Diameter of 280 mm in post - Maximum length 500 mm - Rough of foundry - Re-processing of foundry pig-iron Production of sub-assemblies Materials Mild and alloy steel, brass, aluminium, cast iron, stainless steel Complementary operations Straightening, cutting, drifting, serration, surface and thermal treatment

Our company is a portuguese precision machining company, that produces mechanical parts mainly using production methods like: milling, drilling, grinding and turning with CNC machines. We work mainly with the following industries: electrical industry, automotive, optical, capital goods etc. We are suppliers, for example, to the following clients: Leica (optical parts), Zollern Company, Browning (parts for sportive guns), Efacec (Big electrical portuguese company), Aluminiumgesserei gmbh (automotive parts), among others... Our mainly production equipment is: - 6 CNC lathes (Mori Seiki and Nakamura) - 4 CNC machining centers with pallet system (Enshu and Mazak) - 1 cylindrical grinder - and other conventional machines We have extensive experience machinig the following materials: - Carbon, alloyed and stainless steel - Aluminium (diferent kinds) - Cooper - Engineering plastics

The AZ Factory is your source for waterjet cutting, CNC turning, CNC milling, manufacturing of welded assemblies and assembly. We supply from prototypes to series from a single source and provide maximum availability and flexibility with high precision and punctuality!

CNC technology Wire EDM Metal finishing and metal processing Long turned parts We manufacture turned parts in a diameter of 2mm to 60mm from the pole, as well as 200mm in diameter than lining piece. Available to us Traub A, Traub TD, TB Traub, Traub TK, and lathes of the company Strohm. Other machine tools for finishing: CNC Machining Flott, CNC Tornomat, Charmilles wire EDM, as well as the company Weiler lathes, milling machines Rumag, Hermle, cover, drill Ixion, Gillardon, centerless the company Herminghausen d = 3mm to 60mm.

WÜRZ is a worldwide operating medium sized supplier of very different industries. We produce and sell high precision parts and components made of all cuttable materials. Therefore we trust in latest manufacturing systems. In cooperation with our subsidiary company KÄMPFER WÜRZ Umformtechnik we use our considerable resources. We have a wide spectrum of manufacturing possibilities at our disposal, which distinguishes us– apart from the high standard of our products – on the world market. Likewise fascinating is our range of products: from complex units as individual items up to precision parts and components in large series. At automotive and utility vehicle industry, at mechanical engineering, at fluid and aviation technology fully operational WÜRZ products secure safety, function and efficiency. The potential of your company finds its affirmation in long term business relations with leading industrial enterprises. Further information about WÜRZ Fertigungstechnik can be obtained by using the left navigation bar. Latest manufacturing technology WÜRZ focuses consequently on state-of-the-art manufacturing technology. We invest permanently. On one hand in the modernization of our fleet of machinery, on the other hand to expand our possibilities and to be able to offer new options to our customers. Eleven-axes-CNC-turning, eleven-axes-CNC-profile-grinding, CNC-round-, thread-, excenter- and polygonal grinding in one process, as well as double-spindle CNC-milling with swivel table and plate changer are cornerstones of our spectrum. Further information about our manufacturing technologies can be obtained by using the left navigation bar.

Products POWER TOOLS and abrasives as well as expertise in economical materials surface conditioning. SUHNER manufactures to specific customer specifications and designs to exact requirements. Modular components for cost effective productivity improvements for drilling, tapping and milling operations. Modular components program of highly versatile machining units including heavy duty operations. Multiple spindle heads for drilling and tapping on NC and CNC machining centers. Stamping, bending and forming parts for assembly and sub-assembly of high precision.

We manufacture simple and complex precision turned parts at all appropriate plastic and metal - materials. Nowadays, we can produce up to 43 mm diameter bar stock and up to 180 mm on forage machines with driven tools. We produce pneumatic cylinders and provide all pneumatic control elements (valves, regulators, connectors, hoses, etc.).

Business We, production and service companies EMR Industrial Machining GmbH (in short: EMR IZ), are first-class system supplier to the metal industry in the field of precision engineering. Since its founding in 2000, we as a young company providing customized, sophisticated metal component any types that exactly match the requirements and wishes of our customers in the form, size and material. In addition to our core competence as a supplier of turning and milling technology, we have specialized in the field of hardware for HPLC analysis technology to provide our customers in this area, a comprehensive range of products. We are equipped with modern CNC turning and milling centers, which are available for your requirements. We currently employ 25 people and are constantly growing. Our team consists of highly qualified, motivated and experienced professionals in the field of machining. Our clientele include companies and organizations that are located around the world.Industries and sectors for which we have already made: electric industry, automotive industry, pharmaceutical industry, medical technology, precision optics and research institutes. Services We like to contribute to the mating connector. That's why we offer you the highest precision in individual turning and milling parts, which are tailored to your needs and desires. We have already produced more than 700 different parts and are always adding new ones. Our services include, depending on the needs of both single and serial production. This means for you: You need not search for a matching part, the part you want is made for you to fit in the desired quantities. Our special service: We advise and support you in the production of a prototype and assume all incidental activities that relate to the production of the item. If required, we can fit even your items together. Approach a prototype design: The interested party gives us a template in the form of a drawing or a sample piece, and we produce the desired amount.If a template does not exist, we support you, that looks like this: you give us a rough draft or description of the object. We simulate the object in a tailored specially for engineers software program. You give us your parallel change requests known. After that, the object goes into production. After it comes to the production test phase. During this phase, further changes can be made. This process continues until the object corresponds to your precious ideas. You see: We rotates and milled everything to your satisfaction!

Baier rotation eK is a modern industrial company that has developed steadily in recent years. On-time delivery, reliability and flexibility are the supreme maxim of our actions. This is supported by a quality management system that is existent through regular audits and reviews shall be adjusted by the ever-changing market. Our customers include the automotive and supplier industry mechanical engineering, electrical and precision engineering.

The company Herbert Weiss GmbH is a medium-sized family business which has existed since now almost 50 years. Our power is in mass production of turned parts. Our current scope lies in the furniture, electrical, architectural hardware, window and automotive industry. We manufacture exclusively from the coil with rotary machines. This production brings with it that we can not customize any dimension; dimensions, but fit into our range and are for us in the realm of possibility, are thus produced for our customers in high cost-effectiveness. The production takes place in a modern according to the state industrial hall covering an area of over 3,000 m2. This includes, for example, a fully automatic parts and Spänförderer, fully automatic parts-oil removal and chip disposal plant. In our production, 35 skilled workers working in the four-layer system. The current production site in the Ring Road 23 was built in 1995 and expanded to its present size in 1999. In the current production is measured every 30 minutes regularly drawing justice and documented. The documentary takes place by means of the Software and subject to continuous evaluation. For the production and timely delivery, we are always bemht to do everything humanly possible, because we are seeking a long-term business partnership with our customers. We enjoy the trust of many customers, our products worldwide without input control to their customers to provide direct (Ask for our references). We are DIN EN ISO 9001:2008 certified.

Founded in 1963 as Snc, Min-Tor is a renowned company in the sector of mechanical small parts and precision shafts for electric motors for use in various sectors. Thanks to the quality of its products and the always punctual deliveries, it has grown over time until it became an Srl in 1980. The highly qualified staff and the desire to improve have allowed Min-Tor to receive UNI EN ISO 9001 certification: 2000, a guarantee for all its vast clientele. The company is spread over a covered area of 5000 square meters in a new structure built in 2003 and can count on a fleet of machines for the production of small, medium and large series, CNC sliding headstock lathes and cam lathes, as well as a complete range of machines suitable for finishing such as plunge and infeed grinding and machines suitable for reworking operations such as rolling, hobbing, transfer and induction hardening Our production is based on the specific design of the customers, also offering a consultancy service and feasibility of the details.

We manufacture multi-spindle and spindle machines, and CNC lathes precision turned parts up to a diameter of 65mm. We handle round, square and hexagonal materials of metal and Kundststoff. We also do additional work such as: Polygonal Boring Mill External cylindrical grinding Assembly of smaller components We also produce pre-finished turned parts / assemblies, by letting perform certain production activities of foreign companies such as heat and surface treatments and monitor.

ROJAX is a manufacturing company operating in the field of machining and turning. Our new factory located in Widuchowa near Szczecin was opened in 1994. On the area of 10 000 sqm and with the 3-shift work organisation we are able to manufacture a whole range of products, most of them for the car industry. Well-trained workers and a diverse machines' park let us fulfil the needs of the numerous car industry branches. Our products are made of steel, stainless steel, non-ferrous metals, cast iron and forged parts. We are working in big series but in order of our customers we are making small production, too. We think that because of our flexibility, rich experience and precision we are able to work for another branches, too. Modern stock of machine tools and well-trained employees give us the opportunity to machine the parts made of steel, stainless steels, cast iron and non-ferrous metals. We are focused on the serial production. On wish of our customers we also perform single orders. Our company provides goods as belt pulleys, sheels, pistons, hubs, drums, collars, rings and others which could be machined. They apply in cars of such brands as: VW, BMW, Daimler Chrysler, Audi, Land Rover, Ford and Masserati. All parts are carefully packed and dispatched to customers by our truck. At the request of our customers we can find solutions of special packaging and transportation.

We are experts in the latest CNC machining technology and perform accurate and timely manner our orders. The parts produced in a high-tech process are subject to careful quality control according to DIN EN ISO 9001:2008. We produce individual parts, prototypes, small series and take over at the request of the assembly of various components. We have an a Powerful CAD with Inventor 2010 and CAM HyperMill V 9.7 to also elaborate items are working optimally. We look forward to your challenge! Portfolio Saw Machinery: AMADA HA 250 band saw Sectional area up to D = 250 CNC turning Machinery: DMG 500 Beta Turning diameter 400 Turning length 500 Spindle passage 65 Spindle speed 5000 1/min Mill Machinery: DMU 100 T SK 40 32 magazine locations Traversing X 1050, Y 700, Z 700 Speed 12000 1/min B-axis +90 ° - 12 ° Hermle UWF 1202 SK 40 Traversing X 850, Y 630, Z 500 Speed 5.000 1/min Deep-hole drilling Machinery: TBT T10 2 spindles, drill diameter 1-15, Max drilling depth 250 Grind Machinery: Karstens Internal and external cylindrical grinding machine Centre height 175 Grinding length 650 ABA Surface Grinding Machine Working area 300 x 700 Erode Machinery: AGIECUT 100 Working area X 300, Y 200, Z 250 Wire 0.03 to 0.3 Construction CAD 2D - Autocad 2010 3D - Inventor 2010 To construct digital 3D models with standardized derivative drawings Programming CAM HyperMill version 97 SP2 for the generation of complex 3D NC programs including free-form surfaces

The RL-NC Products GmbH is a young and forward-looking medium-sized company. With our highly qualified employees we manufacture in the small and medium lot sizes range machined parts (turning and milling) of all types and materials. The component part and finished assembly is one of our core competencies. Furthermore, we offer our clients additional services such as hardening and surface coatings in various models in collaboration with our long-term partners. Customer satisfaction is very important in our home, just as our high standard of quality and our high flexibility in order processing. By moving to our new premises in 2008 we have improved our production range further.

We are manufacturers of turned parts on CNC lathes and cam-controlled automatic. The editing area in the CNC technology goes from 8 to 120 mm (200mm chuck) in diameter and 450 (800) mm length and. During the cam-operated lathes from 8 to 60 in diameter and up to a length of 100 mm The lot size ranges from 1 piece to large series.