The LPSsrl is operating for more than 34 years on the national and international markets, it is specialized in perforated sheet metals, expanded metals, metallic mesh, embossed metals, filter elements. The products of L.P.S. solve problems of filtration, separation, protection, soundproofing, decoration and design, washing and drying. We are introducing new product lines for furnishings and design. The sheets are obtained by punching cold. The materials used are: mild steel, stainless steels and other special steels, aluminum alloys, brass, copper, zinc, plastic, ptfe teflon, etc.. L.P.S. operating since 1979 in various industrial sectors, has specialized in drilling as well as standard even in dense passages with close, small and very small holes (minimum diameter mm.0,3), perforations drawing upon customer request. We are able to produce little quantities to mass production. In addition to these metallurgical products, due to its structural division, LPS is able to carry out additional processes such as folds, notches, calendering, welding, etc.. At the headquarters of MONZA (Via Buonarroti 177 Italy) customers can find the largest selection of product in stock: perforated plates (iron, stainless steel inox aisi 304 – galvanized steel-aluminum),textured sheets, expanded metal, woven wire mesh, wire mesh, welded wire mesh, etc..

We are continuing a long tradition in the development and manufacture of tools in Gornja Radgona. Initially focused on the design and manufacture of tools for sheet metal forming, has been expanded over the years, the process chain with series production. Today, more than 75 employees produce tools and production parts for the automotive industry. Over 95% of sales are realized with companies in the European automotive industry. Our products are installed in the cars from leading manufacturers, such as Audi, BMW, Mercedes-Benz, Volvo, Ford, Volkswagen. The quality in the development, production and sale of dies and standard parts, is secured in accordance with the standards ISO / TS 16949 and ISO 9001. Our employees, our know-how and our long experience, are always at your disposal. It would be very pleased if you would turn in your projects to us.

Foundation of our firm is dating into year 1993, when we came to market whit offer of wire program. We expanded our existing program of wire products in the year 1999 to new production from tubes and jokl which are surface whit health free powder color, polyetylen synthetic, chromating. We have started to act under official sign Juraj Zubáň DROTOV after this changes. Housing and office accessories, shopping and industrial goods, facilities (baskets, metal supply, holders, mirrors,....) are creating part of our production program but also accessory attendace, service connected whit production - carriage, knowledge consulting.. Our goal is to improve and make more efficiency flexible production to maximal satisfaction of our client and constantly develop and spread product assortment.

Metal furniture production for Medicine industry, Subcontracting jobs in Sheet metal production from Stainless steel and Zn coated materials, cooperation with building companies in Aluminum facade’s, glazed PVC, Al and Mild steel constructions. Non standart Sheet metal production and Metal furniture – small quantities, special sizes, shapes and colors, everything according to customer request. Starting from engineering and drawing up to ready product. Our main advantage is European quality product made by modern technologies still keeping competitive subcontracting or end customer price level.

Welcome to the RUNAWERK, your contact for sheet metal processing, front panel, keyboard slides and small equipment manufacturing. Our highly trained employees serve renowned customers in the electronics and engineering industries as well as medical, communications, measurement and control technology. RUNAWERK is also certified and officially approved supplier for leading large companies in the aviation industry. Our portfolio at a glance: - Faceplates - Membrane Switches - Sheet Metal Fabrication - Industrial Coatings - Repro & Screen Printing - Laser & industrial engraving - Rubber plates & stamps - Nameplates & Labels - Development & Design Our key competitive advantage is to say: Leading by quality. We understand the "zero-defect goal." We are convinced that we are always with high quality work processes able to achieve predictable, stable and controllable results. Our manufacturing processes are designed so that we avoid from the outset errors and thus produce lasting reliable products with high quality. For us, quality means "compliance with the requirements of the customers." "Quality is when the customer comes back and not the goods!"

MVM Industries is a brand name created to identify a group of companies focalized on the industrial specialization of cold forming metals. It has its origins in the foundation of the head company MVM Srl in 1969, which has been controlled 100% by the family holding company since, and is completed by Realmec Srl and IMG Srl today. The group’s activities have been centralized in the head company since 1998 and are subdivided organizationally through the creation of specialized subsidiaries and the acquisition of other companies that complement the holding company’s portfolio in its capability to respond to market demand in terms of quality, volume and services. MVM Industries positions itself on the market as a highly specialized operator that can support its customer, not only purely in terms of production, but also in co-design, product development, form design and production, logistics and post-production services. MVM Industries internationalized its productive plant in 2005 by constructing the Chisinau plant in the Republic of Moldova, where Italian organizational ability and competence are successfully merged with the productive energy of the emergent Eastern European countries in terms of cost/product. A high level of specialization and an elevated flexibility in process and product sustained by know-how and unique competence in the sector, position MVM Industries in a pivotal position for today’s international market, guaranteeing an unusually valuable customer-oriented service as well as high-quality performance. More than 100 employees, 15,000 m2 of manufacturing plant, loyal international customers of indisputable prestige such as Fiat Auto; Philips; Indesit; Ariston; Denso; Caufetaux & Maury; Benelli Armi and others, and a turnover of 19 million euros for 2006, these are the parameters for assessing the real value of MVM Industries’ achievement and growth.

GÜRGENLİ Mühendislik Ltd started its activities in Bursa in 2000 in order to serve in the heavy industry sector. It aims to produce quality with the knowledge of the trained personnel with many years of experience in the sector. We are a company that has adopted the principle of working without compromising customer-oriented social responsibility and ethical values within the sectors we operate. GÜRGENLİ Engineering Ltd carries out design, manufacturing and assembly projects with its skilled engineer staff in the heavy industry sector.

The study and implementation of press tools for cutting and stamping. • The mass production of cut and stamped parts. This is a team of 48 people, dynamic and effective methods, validated by a panel of more diversified customers: automotive, hardware, tools, construction, electricity, electronics ... ROUGETTE TECHNOLOGIES provides: • A consulting firm performing the design, development and improvement of tools for cutting and stamping. • A mechanical workshop producing tools, adaptation and implementation tools at points of cuts and drawing and spare parts. • A workshop presses from 50 to 500 tonnes for the manufacture of spare sets of cuts and stamping. • The management of other services such as surface treatment of parts to deliver a finished product.

We are a stamping company dedicated to manufacture large series of car parts from 80 to 800 tons with progressive and transfer tools. We have 35 years in this field and our principal suppliers are: Johnson Controls, Alcala Industrial, Faurecia, ARA, DAF..... and we send parts to Turquey, England, France, Germany, Portugal, Belgium....

As a medium sized metal processing operation, the MEMSAN CNC technology on behalf of customers turning and milling parts - preferably in CNC Production - ago. We are a very reputable and modern company in Turkey. With machine services such as wire EDM, sinker EDM, CNC milling, CNC lathes and SPRİTZGUSSMASCHİENEN we specialize in matrices, Models, dies, molds and plastic molds of any kind The range of products manufactured by us ranges from parts design parts, eg for the automotive industry to complex installation parts in assembly groups. The convenient location of our location in Turkey (Samsun is the largest Turkish city on the Black Sea), we are close to the latest developments in cutting technology and are on schedule, fast, cheap and reliable to supply capable of a large part of Germany . We have a lot of know-how ... and little bureaucracy. In MEMSAN CNC TECHNOLOGY They are not passed from department to department and your messages do not remain in complicated communication channels stuck. Speak to the boss or his representative. Our "young" generation also gained several years of practical experience in one of the big car manufacturers in Germany. Way we can respond flexibly to rapidly changing requirements of our customers. Our well-established team makes for almost anything possible. Tooling and injection molding from a single source, an interaction that is worthwhile. High-performance molds for large-scale production, low-cost molds for small series, tailored for your injection molding products. We are able to manufacture injection molding technical parts 2-600 g piece weight. With our computer controlled injection molding machines, we determine the optimal manufacturing parameters. This allows any time the exact reproduction of the parts. Also accessible via MSN.vmatur76@hotmail.de You can also visit our company live under http://81.214.67.120:5555 besichtigen.wichtig without www.

Tomaco-Intro sp z o.o. is a manufacturer of bandsaw strips for cutting of raw wood. The tools are made from high quality alloy steel and meet highest requirements of the customers. The company is also a manufacturer of covers for Fastbind hot glue bookbinding machines

For more than 30 years we have been the supplier of CONTINENTAL, BOSCH, Schaeffler LUK, FTE. The Rossignol group (divided in 2 plants, 1 in France and 1 in Czech Republic, 75 employees) is specialized in the security parts of the automotive industry for the brake systems. We deliver 30 million parts per year (piston rods, plungers, assembly piston rod-clevis, screw parts, 2 spheres pistons, ventilkolben…), thus for the all worldwide automotive makers (FORD, BMW, VW, VOLVO, OPEL, RENAULT, PSA, DAIMLER DC, MAZDA, FIAT, FERRARI …). I invite you to look at the attached files and at our web site for the machining production part (www.rossignol-pierre.com) and at the web site www.galvanik.cz for the surface treatment and logistics part. We are making the clevis on our in-house press machines; we are machining all the parts between diameter 4 to 38mm (CNC, 67 single spindle machines and one area of 15 multispindles). We are also ensuring the welding assembly or riveting (15 machines for pressure riveting), producing forged steel parts, and making a 100% control of all our parts (visual and inspection machine). Our parts are treated internally in our surface treatment plant (new high performance electrogalvanizing since 2007) and we also have a logistic warehouse of 3200m2). We are independent and can guarantee the control and the quality our products, in addition, since 1999 we have been ISO TS certified. Please also be aware that we are exporting to various plants located in the United States, Brazil, Mexico, Turkey, Poland, China, Taiwan, Italy, Spain and France.

Veslatec is an ISO 9001:2008-certified company whose core competence is the laser of titanium, tantalium, stainless steel, ceramics and also thin metals. Veslatec offers 3/2 D laser cutting, laser drilling, laser marking, 3/2 D laser welding, 3/2 D laser micro machining, machining, bending, different coating and product assembly By utilizing the latest and most advanced laser micro machining technology (fiber laser) and traditional production services, Veslatec offers laser application developments and a wide range of contracting services. Our services are mainly found in applications within the industrial, medical, MEMS and aerospace branches. Related products are medical devices, dental implants, drug-delivery systems, micro fluidic devices, and other products characterized by extremely small features. Laser micro cutting and welding of medical devices The high-precision (accuracy better than 15 μm) and new laser technology that the company uses includes almost burr-free cutting and smooth welding. Our new 3 D laser makes it possible to manufacture difficult and sensitive applications faster and with even better quality. Besides laser subcontracting, we also offer related product development and assembly services. For a cost-effective approach for high-volume production, we aim to achieve highly optimized and dedicated processes. Laser cutting offers high accessibility through flexible software and, with the use of modern software, the cutting process can be specialized and tailored to the customer’s requirements.

MÜLLER metal processing + Locksmith We are a young, dynamic company with qualified personnel. Our range of services extends from mechanical processing on weldments to general locksmith and metal construction. MÜLLER metal processing + Locksmith was established in 2005 as a classic one-man locksmith under the name "metal builder Sven Müller". By konsequnte implementation of our corporate philosophy, the power spectrum has been constantly expanding. Here, we developed a service provider in the metal processing. Philosophy: If you only ever do what you can already You'll also only remain what you are already.

With the acquisition of the manufacturing operation of Zeiss Group in 1991, the foundation stone for the Böhm manufacturing technology Suhl GmbH was laid. The company had a solid base in manufacturing technology and an excellent potential qualified employees. Based on this, the company could develop quickly and is today a leader in the areas of equipment and special machinery, electronics, handling systems and manufacturing lines. In 2005, Böhm manufacturing technology Suhl GmbH parent company of Böhm corporation with headquarters in Zella-Mehlis. With its subsidiaries in Turkey and the Slovak Republic, the international market is being processed. With multiple six-figure investment and resistant innovations of Böhm manufacturing technology Suhl GmbH managed the transition from a parts supplier to a developer and producer of complex solutions. The company has almost 200 employees covers all segments of development and design, planning, construction, laboratory testing, manufacturing to on-site commissioning or procurement and logistics of large client companies.It will be offered with the highest standard of quality solutions to complex tasks from a single source. The majority of the Böhm-client operates internationally and 80% belong to their segment of the market leaders. Structurally, the spectrum from large international companies moved from many renowned industry through to indigenous SMEs: for example, the food and packaging industry, semiconductor industry, optical disc industry, medical and rehabilitation technology, automation technology, print media industry, textile industry and defense technology. In 2008, the company undertook several new projects and dared to join them as a system supplier in solar technology.

INDUSTRIAS ALZUARAN, founded in 1959, is a spanish ISOTS16949 certified company dedicated to the manufacture of stamping parts with heat treatment, such as retaining rings DIN-471,472, 6799 spring washers DIN-2093, safety washers DIN-7967, wave washers, clips,.. etc…and special parts according to drawing or sample up to 6 mm in thickness. Our main customers are related to automotive industry, locks, home appliances, windmills, electric market, machinery and hardware distributors. Our export percentage is around 35% to many different countries such as Germany, Austria, Belgium, Brazil, Colombia, South Korea, Czech republic, Denmark, Dubai, France, Holland, India, United Kingdom, Israel, Italy, Japan, Morocco, Mexico, Norway, China, Poland, Romania, Singapour, Slovakia, South Africa, Sweden, Turkey, USA, Venezuela ..etc… You can find further information, visiting our web page www.alzuaran.com If you are interested in our products, or want technical advice, you can submit your enquiries to j.a.barrenetxea@alzuaran.com, and we will kindly answer you.

BMS GmbH ,,, Blech und Metalltechnik Schreiber Medium-sized family company manufactures complete assemblies, fixtures, welded parts, mechanical production, machine enclosures including assembly, including powder coating. Construction in the house.

The Ferrum GmbH has specialized in the manufacture of arched halls of curved elements in grid construction (steel tubes). In addition, the fabrication of single-tube and tie frame and custom designs in small and large series. In all questions of statics and construction, our customers can rely on the experience and the high level of training of our structural engineers, designers, and welding engineers. Perform all statistical calculations for the construction of a hall and monitor each production step strictly in accordance with DIN EN ISO 9001:2008 and EN 1090 - EXC2. The orders will be executed in multiple shift operation of a total of 50 production staff. About the manufacture of arched halls addition, we do on request, almost all other jobs in steel construction. We also guarantee this high manufacturing quality at reasonable prices. Translation by Google Translate

One name stands for flexibility Presses - drawing - Bending - Stamping If efficiency and quality are in demand for stamped parts, press parts, drawing parts and bending parts, the company Hesener is the right person. Because in order to realize the above mentioned our customers rely on our know-how. Whether simple or complicated, just at the limit of what is possible - our in-depth knowledge forms the solutions in Umformfragen. The most important company objective is to serve customers from the start of development to mass production of the components. Thus we are already available to our customers in the phase of product development in an advisory capacity when it comes to material selection and manufacturing feasibility. Through our experience in the manufacture of stamping parts, stamped parts, drawn parts and bending parts, we see it as our duty to the customer in the development of process-and cost-optimized articles to support. We provide the complete solution from one source: Starting with your idea of joint development up to the first prototype, followed by the tooling to the final product as a standard part.