WIR electronic, a manufacturer with more than 25 years of market experience, offers the following services: - manufacturing from individual customized single cables up to complex wire harnesses, 100% made in Germany - each product ist tested, with 5 year-warranty - consulting, design, engineering and production; everything from one source - 100% delivery reliability, with short communication channels to our customers - from batch size 1 up to 10.000 pieces, from prototyping to mass production - overmoulding (e.g. RJ45 straight/ angled; M12 connectors: A-, B-, D- and X-coded) - product range: data cables | single wires | ribbon cables | cable harnesses | coaxial cables | fibre optics | power cords | drag chains | control cables | bus cables (CAN, EtherCAT, PROFIBUS, PROFINET) | mounting/cabling of panels up to distribution boards | and many more - cables with extended or unusual length (e.g. VGA cables up to 50m, KVM cables up to 80m) - Production of cleaned cables (optical industries, medical technology, aerospace technology, micromechanics)

We have been developing and producing highly complex tube fittings for automobiles for 30 years. Together with our customers, we manufacture individual product solutions for sunroofs, convertible systems or cooling and injection systems that are innovative, reliable and safe. Precision is our guiding principle. It is the engine that drives our employees. It is embodied in every single component that leaves our factory. Quality is our top priority. It is guaranteed by the use of the latest technologies and constant process control and optimization by our 170 qualified employees.

Component manufacturer for sensors (inductive, capacitive, optical), M8/M12/M23/7.8” connectors, IP67/IP20 IO systems, PLC controls, 3D profile lasers

Fa DVM GmbH is a relatively young company in Germany, but has been working for many years already with well-known German and European companies. Our establishment is located in the Swabian Unteraspach (Backnang). Fa DVM GmbH is a competent and reliable partner for the trustful execution of: • QUALITY TESTS • ASSEMBLY • REWORK • ZP / ZFP DESTRUCTIVE TESTING / DESTRUCTIVE TESTING • SUPPLIER MANAGEMENT available. Our wide range of methods and know-how are the basis for the successful and efficient implementation of your (potential) outsourcing projects. DVM company was founded in 2007. DVM company is certified to ISO 9001-2008.

Series and component assembly Cable assembly Measurement technology environmental, Vibration and climatic test Mechanical machining

Falke Metall — your partner for high-quality metal processing and assembly Falke Metall is a German company with production and assembly capacities in Bulgaria. We specialize in the production and assembly of metal structures and aluminum profiles for the automotive sector as well as for industrial applications. Our experience and technical know-how enable us to develop tailor-made solutions for our customers that meet the highest quality standards. Our services Precision manufacturing: Manufacture and processing of aluminum profiles according to customer specifications. Assembly service: Professional assembly of components and structures for automotive and industry. System solutions: Development and implementation of individual metal solutions for mechanical engineering, conveyor technology and other industrial applications. Welding and processing techniques: High-quality processing of aluminum and stainless steel using the latest technology. Why Falke Metall? ✅ Cost efficiency: Thanks to our production in Bulgaria, we are able to offer competitive prices with consistently high quality. ✅ Quality standards: We work in accordance with German standards and guarantee maximum precision through regular quality checks. ✅ Flexibility: Individual adjustments and quick implementation according to your requirements. ✅ Experience & competence: Our team of experts has many years of experience in metal processing and assembly. ✅ Reliability: Timely delivery and professional execution — your project is in good hands with us. Falke Metall stands for innovation, quality and efficiency in metal processing. Contact us for individual solutions and tailor-made offers!

SOBEK CNC manufactures ready-to-install turning, milling and drilling parts as individual parts or in small and large series from all machinable materials with or without surface treatment. With our modern and powerful machine park, we are optimally equipped for the production of sophisticated turned and milled parts. We are happy to support you in the product development stage and thus enable the cost optimization of your components right from the start. Processing methods outside of our production range, e.g. B. grinding, laser marking, heat treatment, gear cutting, polishing, electropolishing, anodizing, nickel plating, galvanizing, chromating and passivating are carried out by long-standing and trustworthy cooperation partners - we take care of the timely organization.

If I may introduce myself briefly, my name is Josef (first name) Amara and I am responsible for customer inquiries and visit requests at Cicor Swisstronics AG, for EMS services. Our company is a manufacturer of electronics as well as a system builder. We produce complete electronic products (PCBA). Develop hardware and software. As a pure service provider on behalf of our customers. We don't have our own products! In Bronschhofen we employ 200 people including our own development and test engineering. We are certified according to ISO9001, ISO13485, ISO15378, ISO14001 and ISO/TS16949. Development according to ISO60601, ISO62304 and ISO14971 standard. As well as QDM integration in all plants, which clearly differs from our competitors. Attached you will find our location brochure. Furthermore, we still have the following electronics plants that are identical in construction to the one in Bronschhofen. Romania: 600 employees Certifications: Quality ISO 9001  Environment ISO 14001  Safety OHSAS 18001  Automotive ISO / TS 16949:2009  Production according to IPC A-610E Class I, II & III  In-house trainers for IPC A 610E and IPC 7711/7721 Vietnam: 300 employees Certifications: - ISO 9001:2008 - ISO 14001:2004 - ISO 13485:2003 Other works in East Germany, Tunisia. The QDM integration in all plants, which also clearly differs from our competitors. Our QDM Pro is primarily about safety, quality and their further development. - Traceability over the entire product life cycle - Service & Repair integration - Support for configuration management - Certificate creation for each PCBA - System analyzes regarding causes, etc.

The basis of our activity is the production of drop-forgings according to the customer's designs or provided technical documentation. We offer drop-forgings in a weight range from 0.1 kg to 10 kg of any type of steel, aluminium and non-ferrous metals. Thanks to our extensive metallurgical knowledge, we provide assistance in selecting the appropriate grade of material to ensure the functionality of a given detail.

PRODUCT DEVELOPMENT Regardless of whether it is design, form, functionality or process flow, our experts in the respective areas are available to you throughout the entire process. We not only offer them CAD implementations, 3D printing and simulations, but also offer improvements and suggest changes to achieve the best results. CAD/CAM Regardless of whether it is a sample part or a 3D model of your product, our designers create 3D models for viewing and then drawings for the production of tools, which are manufactured in our own workshop. cad_alat2 Moldjpg MOLD MAKING In mold making, our focus is on complex mold making projects for special product groups, primarily for the electronics industry. Our core competencies include the production of premium injection molding tools for connectors and complex small parts. We offer everything from a single source and support our customers throughout the process, from the idea to the finished product — and beyond. Because we also carry out maintenance and modification work quickly and reliably — even on other forms, if necessary. INJECTION MOLDING We ensure that good ideas also become good products. Small and large parts from theory can be produced in a wide variety of shapes, colors and material properties during injection molding. Anything is possible here. With our injection molding experts in Irig (SRB) and our partner network, we also offer solutions for particularly complex or tricky shapes and are therefore able to meet every customer requirement. With our injection molding machines from 25 t to 450 t, we are ready for any task. Alat se otvara Assembling Maual MANUAL ASSEMBLY Our system services for you are completed by offering the complete assembly of all plastic parts manufactured by us as well as any necessary purchased parts. This allows you to make full use of the added value that we provide you with through our cooperation across the entire value chain. From idea to assembly and timely delivery, we are therefore your reliable partner. We not only provide you with injection-molded parts, we also assemble complete components for you from several plastic and supplier parts, then pack and deliver them to you in their entirety. It makes no difference whether you provide us with the necessary functional parts or whether we buy them according to your specifications. In the end, you will have a ready-to-install and functional module at your disposal. CABLE ASSEMBLY We have an in-house department for cable assembly. To ensure a high-quality and reliable product, we use materials from renowned global manufacturers such as ConexCon, Conectronics GmbH, Molex, JST, TE Connectivity, Amphenol and many others; conductors in accordance with VDE and UL standards. We also have a wide range of tools for the manual and mechanical crimping of various wire ends, core and cable cutting machines, as well as devices for checking finished cables. Each finished cable goes through detailed quality control, so we can guarantee that you get the best quality and a long-lasting product. SMD PICK & PLACE In our electronics department, we are able to assemble specific circuit boards for our customers in order to round off the process chain of our range of services. In this case too, we offer a complete service, from development to the tested electronics that customers need for their products.

We manufacture additive parts using 3D printing (additive manufacturing). All processes and many materials are available and possible!

Welcome to ATG Automation helps companies to design processes in manufacturing, logistics and quality control more efficient. ATG, automation Count designs, manufactures, installs and services individually tailored automation solutions for and in companies from various industries. Customers from mechanical engineering, automotive suppliers, companies from the food and pharmaceutical industry, agriculture and many more from the manufacturing and processing industries use according to requirements designed ATG automation solutions to increase efficiency and quality. A team of 26 highly qualified and experienced staff creates custom part and complete solutions, customized, extended, modified and regenerated existing plants - always focused on a trusting and long-term successful partnership with our customers.

Here is a brief overview of our services: - PCB Assembly (lead free wave soldering and SMD) - soldering - Custom Cable Assembly (round and ribbon cable) with examination - Installation work for example 19 "floors with design and wiring - Cabinet wiring

The CIERRE company was founded in 1970 and has grown to around 95 people. CIERRE is a Subconctractor for the Design and Poduction of Electrical, Electronic and Electrical Equipment. Also services such as the supply of materials; management of the customer’s Material Deposit at us. Links with the Customer’s ERP software. Cierre has a Commercial office, Purchase office; Technical office; R&D office; CIERRE performs Design and Construction of: 1---elektronic, electrical, electrical, equipment (apparatus); 2---wiring of traditional and SMT electronic boards with lines of 30.000 components hour. 3---cables; wiring of single cable; multi-pole cable; SPEVIAL; RESINATED; MOLMED cables; according to customer’s design; signal cables on board Pre-Shaped, with a high number of conductors and then TESTED; power cables up to 240mmq; cables from 0,12 mmq to 180 mmq; flat cables; 4---assembly of POWER electronics; on panels; in cabinet; groups; sub-groups; power semi-finished products; UPS units; Inverters; Power supplies; converters. 5---all about customer specifications and requests; even RHOS. 6---CIERRE is a TUV Certified Sub-contractor ISO 9001; ISO 14000; UL cables.

Our company offers metalworking services. A very wide and complex machine park offers you the opportunity to process various inquiries. We have finished parts and assemblies from a single source, even if we have to procure them elsewhere from our partners near or far from Poland.

aeoon Technologies GmbH – Your Specialist for Mechanical Engineering, Mechatronics & Automation aeoon Technologies GmbH, based in Kramsach, Austria, is a trusted manufacturer of mechanical components, mechatronic assemblies, and custom automation systems. We offer end-to-end solutions – from precision machining to fully integrated system assembly. Our core services include: • CNC machining (milling, turning, drilling) • Mechatronic system assembly • Wiring • Automation & handling systems • Functional & quality testing With a high in-house production depth and state-of-the-art facilities, we serve clients with prototype parts, small series, and complex OEM assemblies. Our focus is on quality, precision, and on-time delivery. Let’s talk about how we can support your manufacturing and assembly needs!

We offer our customers a wide range of simple crafts. From assembly to storage and subsequent shipment of the goods to the end customer or seller. We also deal with quality control and storage for stationary stores and online shops. Our biggest advantage is high financial efficiency, as we can do the work for almost half of the usual prices in Germany. We are also a cost-effective alternative to temporary workers or for bumper work. Despite our status as a workshop for people with disabilities, we are able to efficiently process several thousand parts a month. We not only have experience in the automotive industry, but also work for the textile, promotional products, toy, food and medical industries. We would be delighted to work together. So if you want to outsource simple manual work, compilation, rework or the like, we are happy to help.

Familiar like the department next door. Toll manufacturing with in-house manufacturing. Thanks to our close network of local partners, we are able to offer a far-reaching technological spectrum. We take over your labour-intensive assembly tasks and test systems individually. Excerpt of our services: 1 Manufacturing by machining, bending/edging, laser cutting, welding 2 Assembly of components, assemblies, mechatronic systems 3 Process simplification through sophisticated procedures, simplification of the supply chain law, reduction of the throughput time from the idea to BANF.

For over 40 years, we have been manufacturing adapters for “end of line” test benches, high-voltage contacts (HV), complete systems, test cable harnesses, etc. Our customers include almost all well-known automotive and truck manufacturers worldwide as well as their strategic suppliers. From manually locked test benches to fully automated test benches for EOL testing, our adapters and our patented technology for tolerance compensation for small miniature test plugs can be used for testing processes up to millions of times. From consulting and feasibility research to 3D design, 3D prototyping and individual and medium-sized series production, we offer our customers concentrated experience and expertise.