The company Weigt Präzisionstechnik GmbH stands for highest precision in the metal-processing industry. The company Weigt Präzisionstechnik GmbH specializes in CNC turning, milling and Tiefbohrbearbeitung in 5Achsen technology and for EDM and plastic thermoforming. Development and construction (CADCAM) on modern computer systems ensure consistent quality of parts, manufacture machines and plants in medicine and sports. The company E. Weigt Präzisionstechnik was sen in 1962 by Ewald Weigt. and his wife Annemarie founded Celle in Lower Saxony. The company was 1977 Weigt Präzisionstechnik GmbH. Since 1997 Thomas Weigt leads the company in its second generation as managing partner and gives the company the fresh pulses. It builds on the successful development of, opens up new business making-che, is based on latest technology and expanding the company further. The Weigt Präzi-sion GmbH is training and test operation for the profession of Zerspanungsme-chanikers - specialized in turning and milling technology - and makes up to eight young men-rule out. Since 1997 Thomas Weigt leading the company, Today, around 50 employees of Weigt Präzisionstechnik GmbH secure the com-pany aims: Highest precision, continuous quality assurance, short delivery times and punctuality, a high degree of flexibility and customer proximity - in short: quality through Präzisi-on Made in Germany. To the references of Weigt Präzisionstechnik GmbH include in addition to some small well-known companies from the automotive industry, sports industry, medical technology companies, aerospace and oil and gas industries. With over 40 years expertise in precision engineering Weigt Präzisionstechnik GmbH sets in the future on the development of new products and technologies as well as the Fort of the successful and trustful cooperation with customers and partners.

Welcome to Schur precision parts in Grafenberg. We manufacture long-turning and short turned parts in large and small series with deep holes from Ø 0.5 to Ø 22 mm in one clamping. Furthermore, we offer a special machine for high-precision and long-turning tieflochbohrfähigen and short turning machines. Services: SHORT SPIN CNC 5-axis Bar stock Ø 5-45 mm Chuck parts Ø 5-100 mm With a length of up to 140 mm Milling in one clamping possible All rotating parts are available in one clamping tieflochbohrfähig LONG TURNING CNC 7- 10 axes Bar stock Ø 4-30 mm In a turning length of up to 500 mm Milling possible. All long turning parts in one clamping tieflochbohrfähig Drilling depths up to 165 mm Drill diameter Ø 0.5-22 mm DEEP HOLE DRILLING ELB - method - Drilling to ø 0.7 - 6.0 mm - Drilling depth max. 500mm - Workpiece length rotation max. 440 mm - Workpiece length standing max.900 m Our Mission: "Quality is no coincidence, it is always the result of intelligent effort." Quality objectives: meet customer needs Reliable machining avoid errors Zukunftsorientiertes Customize The latest CNC machines ensure rapid responsiveness to your needs and changes. Measuring and testing equipment and appropriate lessons and measuring equipment guarantee the highest precision and quality. The certification according to DIN ISO 9001: 2008, our quality consciousness completes. See for yourself. We advise partners and offer a comprehensive service.

Tecnoscalve srl was established in 1985 in Schilpario (Bergamo Region), northern Italy. Since then, the company presents itself on the market as supplier of turned and milled parts, for all industrial sectors which require high precision, quality, service and many years of experience. Highly qualified and experienced employees work together on a production area of approx. 2.500 sq. mt. and enable the company today to produce various mechanical milling and turning parts according to the customer's drawing; Tecnoscalve is specialized in the production of small / medium series as well as individual parts and unique items. Tecnoscalve offers its customers a complete service, from material procurement to assembly of the whole welded metal structure, from mechanical milling and turning up to the final inspection, quality control and final assembly. If required, heat, surface and paint treatments are carried out by external partner companies so that the end customer is able to receive from a single supplier the mechanichal parts ready for its internal final assembly. Tecnoscalve manufactures und supplies mechanical turned and milled parts for different industrial sectors, mainly machine tools manufacturers, woodworking machines, special machines for cable constructions, food processing machines and packaging machines, mechanical components for textile and printing machines.

ENERGOREMONT AG is a successful medium-sized company in the field of steel construction and power plant construction which addresses the growing challenges of the market as well as new business opportunities with innovation and quality. We offer our customers and partners high-quality products and services with a focus on the development of innovative and holistic solutions. Our own high standards in relation to: • product quality, • reliability and customer satisfaction, • advanced technological processes, • the most modern technological equipment • competent and trained employees Our offer includes the development, production, marketing and distribution of products in the field of steel construction and energy plant construction. The main activity focuses on: - Maintenance of energy systems - plant overhauls - General overhaul of machine tools: lathes, milling machines, grinding machines, presses ... - All types of metal construction - Manufacture of light metal structures, medium-weight structures, steel structures - Production of all types of front gears from modules 0.5 to 14 and max. Diameter 1200 mm ... - Welding of steel and cast iron, aluminum, stainless steel, repair welding - Manufacture and design of electrical systems - Overhaul of asynchronous motors.

Specialist in the machining of castings from aluminum, cast iron, brass, bronze and steel parts Individual production of drawing parts according to customer specifications from prototype to series of 100,000 units in Specializing in the machining processes milling and turning Mastering CAD / CAM programming for fast and high-precision manufacturing Our own tool and jig allows quick series start and high flexibility 50 specialists in turning and milling at two locations in Buchkirchen in Wels technologically strong partner with high investment potential in modern machinery Industries Served: Special vehicle industry, automotive industry, equipment construction, design, rail vehicles, Winter sports industry, mechanical engineering, electrical industry

Manufacturing workshop specialized in turning and milling. We are family company placed in Lower Silesia district located in south-west Poland 120 km from border with Germany. We mainly turn and mill shafts made of steel, stainless steel, aluminium, bronze, brass or cast iron materials. Our team is very experienced in machining, so we are able to please most demanding clients and we like what we do.

We are specialists in the industry. Turning, milling, cross drilling, sawing, punching, bending, assembly, notching, welding, soldering. This is what we make precise and cost-effective for you. We manufacture and assemble small series and prototypes and of course take over your large orders. Materials: plastics, steel, aluminum, stainless steel, non-ferrous metals We would be happy to go on their special wishes - simply contact us by phone or e-mail! We offer: - Turning - Machining - Automatic turning (bar) - Milling - ....

Manufacture of teaching aids, assemblies, milled parts, turned parts and plastic injection parts. Design - manufacture - assembly.

ZIAS is an international group of companies, which is represented in Germany with ZIAS International GmbH in Darmstadt. Our production is flexible and can operate various jobs in metalworking, which uses the following technologies: turn mill punch roll To bend To cut heat treatment grind extrusion Polymer powder coating welding galvanizing hardening From the production of building profiles to manufacturing precision parts for the medical, aerospace, tools for production machines and entire automated systems and equipment - all the strengths of ZIAS are. Qualified ZIAS staff in all areas ensure the quality of products and ensure timely order processing.

A-Kaiser GmbH has been a leader in the machining of lightweight aluminium components and ultra-lightweight magnesium parts since 1979. On account of their low weight and associated economy, these components are the choice of the automotive industry. Germany’s major automotive manufacturers and renowned Tier 1 suppliers have numbered among some of our customers for decades. We are currently focusing our company on the field of chassis components and electro-mobility. At our two production plants, we have an over 600-strong workforce specialising in the mechanical processing of gear and clutch housings, which are supplied to gear plants as ready-to-install components. A-Kaiser GmbH disposes over a broad spectrum of industrial manufacturing processes and capabilities for the high precision pre- and final processing of semi-finished metal products. We produce everything from different unmachined metal parts (grey cast iron and spheroidal graphite iron, aluminium die castings, magnesium die castings, forged parts, steel alloys etc.), through to fully assembled axle parts. Our portfolio covers a range of just-in-time production configurations for machining vehicle components. Intricate and delicate series machining involving lightweight unfinished aluminium and magnesium castings top off our service portfolio, as is the case for the manufacture of ‘green parts’ and parts ready for immediate installation on a plant's assembly line. Our value-orientated process development and production planning begins with comprehensive expert knowledge of products and processes. The combination of production systems, machines and highly trained and qualified staff who are familiar with processes together with our in-house tool and fixture construction ensure an extremely tight and flexible value chain. To ensure a smooth workflow, the tool and fixture construction and industrial engineering departments are in direct contact with each other. The latter works very closely with the automation team.

Dear, In the annex you can find company presentation from Hira-Parts. We are a company work with countries like : Germany, The Netherlands, Belgium, England, İerland and Romania. HİRA-PARTS FOR YOUR MECHANICAL OUTBREIGHT Hira-Parts is a reputable supplier where you can go for outsourcing in the field of Engineering, Mechanical engineering, Construction work, Sheet metal processing and Machining of metal components in small and large series. PRODUCTION IN TURKİJE - LOW COST, HIGH QUALITY The entire production of your hira-parts takes place at the production facility in BURSA - TURKİJE. The reason for this location has everything to do with the advantages in the area of low labor costs which obviously have an effect on price formation. Hira-Parts carries out the production of your parts with a modern machine park which you can certainly find in the . CNC DRILLED MACHINES FOR TURNING AND MILLING The machining mainly takes place on CNC-controlled machines that are set up in a separate room. Due to the flexibility we are able to realize your outsourcing of turning and milling work with short lead times. If required, we can deliver your orders in partial deliveries to speed up the turnaround time for you as a customer. The outsourcing turn and milling work can therefore be tailored to your wishes. ASSEMBLY In order to increase our added value as a supplier, we can also carry out the assembly of semi-finished products for you. Parts of metal or plastic processed by us or supplied by you can then be assembled with other components. That saves a lot in man hours. THE ADVANTAGES: • Due to the low wage costs, we can achieve a favorable price level. • Dutch, English, German, point of contact. • Brokerage firm, so do not push up prices. We thank you for your interest in our company, and we look forward to a long-term cooperation. Best Regards / Met vriendelijke groet / Mit freundlichen Grüßen Ali Bahadır Oral Production & Sales Manager DR.Ziya Kaya Mahallesi Yayla Sokak NO: 2 Daire : 8 P.K : 16600 GEMLİK / BURSA - TURKEY GSM : +90 543 369 12 77 Web : www.hira-parts.com E-mail : alibahadir@hira-parts.com

Ideas create value. This is the motto under which KAMA’s engineers design high-quality die cutters and Folder-gluer for a world-wide market. And they’ve been doing it for over 100 years. Being a reliable partner for cutting and finishing processes, we offer our customers a variety of economical solutions for small and medium print runs. Every KAMA machine contains a piece of the future. So you can master the growing demands for post-press processes and finishing. Flexibility opens doors. KAMA’s second line of business is the manufacture of single parts, machine assemblies and Rilsan-coated rolls. Thanks to their technical flexibility, our specialists manufacture tailor-made parts to our customers’ specifications on modern machines in a very short time. So you can ensure everything runs smoothly in your production. Confidence defines partnerships. KAMA’s customers are small and medium-sized job printers, packaging printers, bookbinders and cutting shops, as well as well-known large companies around the world. Our print finishing machines are distributed in close co-operation with leading printing machine manufacturers, sales organisations and own subsidiaries. So you can reach us quickly and conveniently, wherever you are.

The Linner Tooling GmbH is a family owned company in Wolnzach near Munich with about 120 employees. We are on the market now for about 30 years and are known for reliable quality, customer focused services and a very high degree of flexibility. To keep our position in the future we focused on three separate and highly specialized divisions. Precision series production Our series production deals with companies in the electronic industry mainly. For those companies a high quantity of products in good quality matters and so we use our turning automats, rotary transfer machines and indexing table machines in optimal way to meet theire requirements in a flexible and economical way. Precision tools and components The division has a big branch of customers from different industries for whom it produces special-purpose tools as fastener for reversing plates, profile and forming tools and many more. The range of parts produced in this division is limited by diameters up to 250 x 250 mm and we use combinations of grinding, eroding, milling or turning in an optimal way to ensure good quality. Therefore we use 5-axis milling centers and the latest CAD / CAM Systems to guarantee repeatability and the high standard of quality. Tool sharpening With most modern 5-axis CNC grinding machines and with the help of graphical simulation programs we produce new tools as stepped drills, profile millers and special-purpose tools. Further we regrind or reproduce special and standard tools with original geometrical data so the tools are as capable as new once. Off course we also offer common and special coatings and we are able to supply kanban-systems, a stock at your place and supply you just in time.

Established over 40 years ago and proudly remaining a privately owned family company, we can either make complete or source your metal machined components using our vast knowledge of engineering experience.

We offer comprehensive services, such as: - Metal internal contour work - Laser cutting - Welding works: E-welding, MAG welding, Tig welding - CNC milling - CNC machining - Surface treatment: radiation, flat grinding, polishing - Machinery & Component Construction with a lifting capacity up to 10 tons - glow - hardening - Transport from and to the customer

The company specialized at precise machining small and medium parts.

CP Tech GmbH from Büren has been part of the Nedschroef Group since June 2017 and focuses on innovative in-house products, engineering services, high-performance components and complete solutions for the automotive, motorsport and aviation industries. The focus of the corporate strategy is on the development of new mobility concepts, shaped by global trends such as e-mobility, lightweight construction, networking, sustainability and autonomous means of transport. With around 210 employees, CP covers the entire value chain from development through project management, production and assembly to testing and validation of complete vehicles. The core competence of CP lies in the production of high-precision lightweight components from high-strength steels and the interaction of hand-held welding processes, heat treatments, mechanical processing, including the associated device concepts. CP also has its own agency in Shanghai (China) and works there with various companies.