We are a trading and service company for hydraulic components, hydraulic power units, which find its use in machines and systems. Includes Our hydraulic supply, hydraulic components (eg small units, AC motors, gear pumps, manual control valves, pressure relief valves, hydraulic tubes, hydraulic couplings, hydraulic motor-pump units, pressure gauges, hydraulic fittings, hydraulic hoses) and much more. The complete hydraulic goods, we refer exclusively by renowned hydraulic manufacturers that can boast decades of experience in the production and manufacturing of hydraulic products for OEMs and machine builders. Here is an overview: - Repair of hydraulic power units to 400l at the factory. - Repair of hydraulic power units on site. - Repair translated, assemble and test of hydraulic blocks. - Repair of hydraulic presses Pretended pipe bending and assembly according to your - - Exchange of bladder bladder accumulators - Harnessing of hose lines - Tubing change - Mobile Oil Filtration - Particle measurement - Fluid removal + analysis according to VDA 19 orISO 16232 - Filter change - Filtransionskonzepte for your systems in close cooperation with a fürenden filter Manufacturers - Filter design - Hydraulic presses Safety verification in accordance with BGI 724 (old BGR253 and VBG7n5.2) incl Nachlaufwegmessung - Repairs and overhauls - Modernization of old plants - Spare parts Service

PLASTIC MANUFACTURING AND ELECTROMECHANICAL MACHINERY INDUSTRY AND TRADE

The company developing and manufacturing Eßbach was founded in Berthelsdorf 1999. Since April 2007, we relocated our headquarters to Brand-Erbisdorf. Here are covering an area of 750m ² various machining centers, design workstations and above average well-trained staff available with which we can also realize your tasks! Our high quality standards are certified by our certification to DIN ISO 9001. Examples of our products you can found in our website www.efe-essbach.de. Our main pillar is the development, production and distribution of heat sinks for power electronics. In addition to liquid cooling body systems based Unicool we also manufacture air-cooling systems of the body or combined devices after the system coldplate. Of course, we adjust the devices on your required specifications. Customers who use our products or benefits, include Siemens, Bosch, Baumuller, Bonfiglioli Vectron GmbH and Lust Antriebstechnik GmbH. In addition to the production of heat sinks, we operate a small special engineering. With this we are able to manufacture high quality facilities capable of over CAD design and CAD / CAM Interfaces. Thus, several different labeling systems to the standard product labeling including PDC connection were realized in our home. The investments are made entirely with control, and CNC-axes and delivered. Our customers can be found among others in the field of automotive and supply industry. Examples are: - Test benches for drive spindles with data acquisition - Labeling systems with freely programmable CNC axes 800x600x400 - Marking gear parts with interface to the PPS system - Devices for assembly and testing purposes - Molds for aluminum cast parts up to sizes of 800mm, including processing of castings when required - Special coolant systems for machine tools With our technology, we are able to realize customer-specific solutions, including the manufacture of parts and assemblies.Our machinery, we have expanded to operate and in particular the following machines: - 1 CNC machining centers with tool change 2000x800x800mm, internal cooling and swivel head - 1 CNC machining center 1000x500x400mm with tool changes and internal cooling - 1 CNC machining centers with tool change 500x400x400mm and NC rotary table - 1 universal CNC milling machine 800x400x400 (vertical and horizontal) - 1 CNC lathe, diameter 300mm long and 300 - Conventional turning up to 1000mm long - NC mandrel tube bending machine to D 26x2mm VA tube - Korundstrahlkabine for VA materials - Edelstahlbeizeinrichtung inside and outside - TIG welding workplace The CNC machines are connected to our CAD / CAM system and thus to work in a position to meet your or our drawings. Again, we have customers such as Heidelberger Druckmaschinen AG, Deckel Maho, Samputensili GmbH, Bharat Forge Aluminum GmbH & Co.KG or Licatec GmbH.

Industrial Design - Metal - Machine - Engineering

Company has used its long-standing knowledge and experience in civil production sector as well. The main part of civil production covers: welding of structures, their machining and assembly into final products such as traffic, constructional, handling and agricultural facilities. In 2004 more than 80 % of civil production had been made for foreign companies mainly from Germany and Great Britain. Continual investment into advanced machine holding, production workshops, experience of our businessmen, technicians, workers and very good relations with our customers are very good conditions for further development of co-operation production development. Over the last year there has been turnover of 2,5 billion CZK and positive profits. Currently there is 950 employees. Supervision of management, prescribed product properties and parameters are guaranteed by permanent quality control. The company has been certificated in accordance with ČSN EN ISO 9001: 2001, and AQAP 2110 standard and process of welding according to ČSN EN ISO 3834-2:2006 standard both connected with the company informational system. The company is a member of the Economic Chamber and a member of Czech NBC Team aliance (www.nbcteam.cz) operating under the patronage of Czech Trade - the national trade promotion agency. International highway routes, railway service and nearby international airport enhance company international business/co-operation. VOP 025 is situated in the middle of a large industrial region with a lot of companies able and ready to co-operate. Production of engineering parts of building and handling machines, production, cutting, machining, welding, assembly and painting. Welding certificate according to the EN 729-2

Aero Gama is an Italian company operating in the precision mechanics sector in the aeronautical, railway and naval fields. is equipped with a vast fleet of updated machines with 5-axis machines, gantry machines up to 4000x2000mm of working range, horizontal machines for small and large production batches. the metrology room is equipped according to all iso standards. We also carry out small carpentry and assembly activities, as well as construction of dedicated equipment and machinery.

Wendt Engineering is a machinery supplier for the rubber, plastic, wood, automotive and packaging industries. We manufacture according to our customers' drawings, drawings of our own construction company MV automatic as well as our affiliated partner design offices. We produce individual parts, assemblies and complete systems or machines. Our departments wire the equipment, tubing to pneumatic and hydraulic. With our partners, we produce the cabinets and take control programming before. The machinery and equipment we provide internationally, operate, and take over the maintenance. If necessary, in the 24-hour service. Our customers get complete systems from one source. Through our tremendous opportunities in parts production - CNC milling and turning, our steel construction and our electrical and assembly departments we can react quickly and flexibly. Plant and machinery can be in our house completely erected and retracted before we take you to the end customers and take you there in operation. Please look at the entire spectrum as well as our machinery etc. on our webside at: www.wendt-maschinenbau.de to

The name of the company founded in Berlin in 1908 the company is derived from pre PRECISION we rkzeug ma chines. At its present location in Escwege, the heart of Germany, located PRÄWEMA has approximately 180 employees, including 15 trainees, established itself as a partner for the industry. Of course ISO 9001 certified.

The TAWESCO is leading producer of tools, metals stampings, weldments mainly for the automotive industry but also trucks, agriculture and forestry machinery, mostly heavy weldments including surface treatment and welding fixtures. Key figures: • All in one solution under one roof (DESIGN – TOOLING – STAMPING – WELDING) • Turnover about 78 mil. EUR in 2019 • 950 employees • Production area about 50 000 sqm in Koprivnice near Ostrava city • Tradition since 1850 as TATRA Trucks production • Quality management: EN ISO 9001:2015, IATF 16949:2016, VDA 6.4., ISO 14001:2015, ISO 3834-2 • CAD-CAM Capaility: AutoCad, Catia V5, Autodesk Inventor, IDEAS, AutoForm Tawesco competitive advantage: "All under one roof ": stamping + welding + tooling + design Stamping: • Metal and aluminium stampings for automotive industry up to 50 kg • Mechanical, eccentric, progressive and transfer presses up to 2000 kg • Press breaks up to 8 m Welding: • Weldments for automotive - spot and laser welding • Heavy weldments for trucks, agriculture, forestry and municipal machines • Robot, automatic, semi-automatic and manual welding • 2D/3D laser cutting Tooling and design: • Welding and machining jigs up to 15 m • Tools for forming, bending and perforation of steel sheets up to 50 T • Milling centres, drilling and grinding machines • Try-out hydraulic presses 1250 T and 2500 T Quality management: EN ISO 9001, IATF 16949, VDA 6.4., ISO 14001, ISO 3834-2. References: 1. John Deere, Kemper, CLAAS, KION- Linde Material Handling, Fenwick 2. TATRA Trucks, IVECO 3. SKODA Auto, Audi, VW, Bentley, Daimler 4. GESTAMP, SNOP, TIBERINA

A new idea: With the emco-novus-service, the Erwin Müller Group also offers a competent supplier in the areas of development, mold making, Die cutting, sheet metal processing, plastics, zinc die casting, surface engineering and coating technology. Even as a supplier for components in the nuclear industry, the group has established itself as a technically competent and flexible partner.

We offer you the wage production and wage-assembly according to your drawings. Bracker GmbH Innovative engineering offers the entire range of individual manufacturing of parts and Small series and their assembly. The material processing ranges from metal manufacturing in stainless steel, steel and nonferrous metals to manufacturing of plastic elements. We see our role in the realization of your manufacturing requirements according to drawings or samples as well as in construction work prior to production. In addition, plan, design and build to customer devices and assemblies with profile elements.

We are more than machine! Sure, we develop and build machines. But our four business areas have made us as a service-oriented service. We provide not only contain the products - whether equity, debt or coater - always competent engineering and assembly services to.

Böhm Precision milled parts made of single pieces to medium series. By further processing in their own electroplating components can be supplied ready for installation. Feature is a process for production of prototypes made of aluminum: Gußzeichnungen be decomposed into millable items, made these, galvanized and soft soldered. This results in accurate parts with properties that are broadly equivalent to those of a Feingußteils at a fraction of the cost.

We are a medium-sized company with 38 employees. We are located in Stadtlohn, in the scenic Westmuensterland (only 10 miles from the Dutch border). For 29 years we manufacture machines for rationalizing and modernizing every kind of industry. To give you a small view of our production program, we have programmed these Internetpages for your convenience. Due to the wide range of our production program we are only able to show you a few examples of all machines we have produced.

KINEX Bearings Division belongs with its portfolio among important global suppliers of standard and special rolling bearings aimed for beddings in various industrial applications. The main task and goal is to ensure supplies of complete bearings assortment manufactured in individual plants of Bearings Division, to develop cooperation with customers and to provide them services in accordance with their requirements. In order to achieve a maximum satisfaction of our customers and to react flexibly to market requirements, the Bearings Division integrates R&D, engineering, manufacturing and commercial activities. The history of bearings production in Kysuce region enjoys a long-term tradition. The Bearings Division commands over more than 60 years of experience in the production of standard and special bearings, a progressive production technology and own technical know-how. It offers a high product standard and quality under KINEX brand. Manufacturing companies of Bearings Division produce ca. 8.000 types of bearings modifications aimed for use in various industrial branches. Nearly entire production is directed via trading company KINEX BEARINGS, a.s. to foreign markets. Plants of the Bearings Division have a developed Quality Management System compliant with process-oriented standard ISO/TS 16949. At the same time, the Quality Management System is provided pursuant to standards EN ISO 14001concerning Environmental Management and BS OHSAS 18001 concerning Occupational Health and Safety.

Manufacturing / Services In the field of mechanical processing, we provide you with milling, drilling and turning a complete service. We produce pre-finished machine parts, complete assemblies, pilot series, small series or even like large series. Also, we can quickly and inexpensively make assembly jigs, welding jigs, milling, turning, and drilling machines, cutting and bending tools or transportation safety. Even pure construction activities we offer.Focus in the area of special engineering. We process are all materials and offer for it and all the heat and surface treatments with powerful partners. New: Also construction / special purpose machinery Here we can offer you from design to manufacture special machine everything! Top Quality For us quality is a matter of course! The use of SPC tests, EMPBs or FMEA is one of our services! Your extended workbench They have capacity constraints or want to relocate labor cost intensive operations? ► Then use our workbench service! We are happy to take over for you (even overnight) activities in the following areas: Assembly Milling Drehtechnik CNC milling CNC turning Boring Soldering

As a manufacturer of machine tools, production lines and automation technology for metal forming, powder metallurgy and building materials, LASCO partners clients in a spectrum of industries world-wide.

We are a small, in the area round, and flat grinding well qualified company in southern Germany. We specialize in the manufacture of precision components mainly made of tool steel and carbide. We also offer good skills in turning and milling. We are fast, innovative, flexible - good in price and quality

iTR is your specialist for individual individual and series production in the areas of: - steel construction - CNC machining - Fixture construction and general mechanical engineering - Individual and series production according to drawings Our machinery enables the processing of large and small workpieces. With our qualified and dedicated employees, we are able to complete your orders on time and in high quality. Our company has been certified in accordance with DIN ISO 9001 since 1999, meaning that the quality of our products is subject to a comprehensive quality assurance system. In welding technology, we have the extensive certificate of suitability in accordance with DIN 1090-2 and the certificate for print production in accordance with the Pressure Equipment Directive 97/23/EC. Well-known customers rely on our high quality standards.