Production We offer complete production, ie the semi-finished or blank out the turnkey component. Also complete assemblies including assembly represent no problem for us Manufacturing process • CNC complete production up to Ø 65 mm • CNC complete production up to Ø 300 mm • CNC turning up to Ø xl = 300 x 500 mm • CNC OD grinding up to Ø xl = 290 x 630 mm • BAZ to lxwxh = 760 x 400 x 600 mm • Gear milling • rooms and slot milling • 3-D measuring machine Materials • All major in mechanical engineering steels • Stainless steel

Open-form forgings with a unit weight of 10 to 20,000 kg Seamlessly rolled rings with a unit weight of 15 to 4,000 kg Forging, heat treatment, quality controls and special treatments according to customer requirements Vertical lathes with a turning diameter of up to 2,800 mm Center lathes with turning lengths up to 10,000 mm Drilling and milling machines, special lathes for turning and drilling hollow forged shafts, conventional and CNC controlled All commercially available non-destructive and destructive material tests Quality assurance according to DIN/ISO 9002 - EN 29002 Our products are used wherever the highest technical requirements are required, e.g. in gearbox, machine, turbine, valve, engine and press construction, in the petroleum industry and in shipbuilding. Hammerwerk Erft delivers to all parts of the world with increasing export shares - primarily to our Western European neighbors. As a flexible, medium-sized private company, we are happy to respond to our customers' special requests within the scope of our technical capabilities.

Through years of experience in the management of my engineering firms in the different fields of activity, I have very good contacts with Eastern European steel processing plants, both in weldments, and in the cutting process. These powerful pavers do not have a Vertieb. This part, I assume so that the market does not have to give up the quality but very cheap quality work. Here, getting involved with the technical assistance and coordination and with the complete commercial processing.

We are an efficient company from Saxony with our own development and well-trained and experienced specialists in design and production. Since our foundation in 1992, the company has expanded continuously and we can refer to a large number of satisfied customers in Germany, Europe and all over the world. Convincing quality in production, extensive experience in the fields of tool making, forming processes, automation technology, special machine construction as well as apprentice training and further education are among our strengths. We manufacture mainly for the automotive and supplier industry, mechanical engineering, electronics and precision engineering, the construction industry and other industrial sectors. Translated with www.DeepL.com/Translator (free version)

As a reliable partner for contract manufacturing in the area of complete CNC manufacturing of components and assemblies, we would like to present ourselves as a supplier for your company. As a family-run company in the Gießen district (Central Hesse), we have been working in the area of CNC processing (contract manufacturing) since 1979. Our technology includes: - 3-axis and 5-axis milling machines with 5-axis Simultaneous processing - Single and double spindle lathes with Powered tools and bar feeders - Measurement technology for quality assurance (coordinate measuring machine Bj2023) - CNC band saw - CAM programming (SolidCAM) - materials (aluminum from high-strength to decorative, stainless steels in all grades and brass) - automation (robot) Our services include: - CNC processing (turning & milling) individual and Small part series production - Assembly of components - Create measurement reports - logistics (Kanban systems, Pool4Tool interfaces, framework agreements) - surface technology Sectors: - Optical industry - Vacuum technology - packaging industry - Automotive - and much more

Construction & Design reconsider - new ways and possibilities with 3D printing / additive manufacturing process various processes and tools are needed to reach the goal | I want to help you

CL Maschinenbau has been set up as a mechanical engineering service company that offers integrated solutions to its customers. Manufacturing jobs are guaranteed to be dealt with in a comprehensive manner, ranging from procurement organization to product dispatch. We purchase at optimum terms. Parts and components are made on our own in-house production machinery, which cover such operations as cutting material to size, milling and turning parts on state-of-the-art CNC machinery, as well as grinding, welding, paint coating and assembling jobs, including electrical installation. Also, we perform surface treatment work, such as hardening and electroplating. Thanks to our employees’ high-level skills and qualifications, our company delivers first-rate quality. We attach particular importance to on-time performance and regular communication with our customers. When it comes to personnel management, our focus is on training and further education. The flexibility and extensive experience of our workforce ensure that you will get modern and cost-efficient technical solutions from us.

Your Partner for Manufacturing & Service in Mechanical and Plant Engineering METASPAN supports you as a manufacturing partner from 3D design through high-precision production to measurement and logistics. Renowned for our expertise in the mechanical CNC machining of medium- and large-format components, we produce components weighing up to 40 tons daily in a state-of-the-art facility, adhering to the highest quality standards. Our company combines modern thinking with a commitment to tradition, master-level craftsmanship, and engineering expertise in mechanical and plant engineering. As a service partner, we offer comprehensive services for your machine tools. From regular maintenance and care to repair, refurbishment, and assembly work, as well as complete retrofitting: our team of experienced machine fitters, service technicians, and engineers is truly "at home in machine tool manufacturing"! Decades of know-how, cutting-edge equipment and measurement systems, along with extensive in-house production capabilities, ensure competent and solution-oriented service.

Henschel KG is almost here everything you need for production and can be made of machineable material.

The company was founded in January 1950 GEFIE of Mr. Hubert Fiedler based in Reichenbach / Fils. Livelihoods in the first decade was the production of tools and molds the range precision casting, as well as printing and injection molding. The imagination of company founder led to its own patents and utility models for their own developments such as the Eckenfräskopf and Abspritzgerät. In the following years the apparatus broke off to the range gradually molds and tooling. In 1970 the company moved to the location Rosswälden where we produce today on an area of 1800 square meters. The beginning of the era NC CNC technology brought the end of the 70s revolutionary changes to the company structure. Since handing over the management to his sons Hans-Jörg and Harald Fiedler, the company has established leader in the field of Präzissionszerspanungstechnik area milling. Since 1992 he additionally added the exclusive representation of original cover spare parts for engraving and copying milling machines (all cover-processing machines of Nachformsektors).For the machines of the series KF, GK and G1L we maintain a stock of spare parts with about 7000 items that are kept in stock to 90%. In 2000, the field of precision turning with three INDEX turning machines rebuilt. Highest accuracy is ensured here by production in air conditioned rooms. Since 2002, we have expanded our offering by a service center for coordinate metrology. We offer contract testing, first article inspections and contract programming. CNC manufacturing Our manufacturing facilities are equipped with the latest technology. Our extensive experience in machining and tool sector are reflected in the range of parts again. We provide for the sectors automotive, aviation and aerospace engineering and mechanical engineering. Our manufacturing facilities are divided into the following areas: Milling Turning Assemblies In 2000, the area was enlarged assembly.We produce individual parts and assemble them with the supplied components to assemblies. For the assembly of precision parts are two deferred from the production area rooms available Coordinate Metrology In our air-conditioned service center for coordinate measuring technology, we make quality 3 - and 4-axis measuring machines visible. Only tested and documented goods leave our site. In addition to internal quality assurance, we perform contract testing, first article inspections and contract programming. Cover spare parts We provide exclusive original cover spare parts for engraving and copying milling machines of the series KF, GK and G1L. An extract from our product range can be found below. * Collets in various dimensions * Threaded connector * Fräslager 10 000 U / min / Fräslager 20 000 rev / min * Modellfräseinrichtung * Drive cords in various dimensions * Lettering guides all variants * Finishing spindle (left) and Roughing (right) * Control valves for KF and KF 2 S 3 S * Ferrules

In the near future, the company Hermann sheet GmbH, which was founded in 1949 by Alfred Hermann, continued in the third generation. The successful mix of Swabian quality work and cutting-edge technology ensures the success rate in our house. Worn and determines this success is due to the extensive know-how of our qualified skilled workers. The company's roots lie in the manufacture of precision sheet metal parts for the telecommunications industry. In the recent past, the company has increasingly specialized in the production of near-series samples and small series. We see, in addition to the precision of our sheet metal parts, the high quality and great flexibility as a significant advantage for our customers. Benefit from our long- years of experience as a sheet metal pro ... ... we look forward to a good cooperation. Company Description The company Hermann sheet GmbH was founded in 1949. The range includes precision sheet metal work from the board to the finished product. From prototype to series with all the trimmings. By Hermann Blechtechnik they get everything from a single source, as we work in the same company group with specialized companies and from one piece. From the development, design 2 +3 D, prototyping, testing through to series production and delivery of finished products according to our customers. New to Hermann Blechtechnik: Electromobility Development Production of 2 and 4Rad vehicles. Production of HOT CHILI mountain bikes Street Steppers Body Buddy as a new fitness machine. Prototype of ELMOTO as electric motorcycle clothing. Development of Stepelec g of an electrically driven stepper.

For over 10 years we have been a supplier to the industry. Our customers include companies with inhouse CNC production department. We are specialists in the production of turned parts. Whether sample parts or electrodes for mold making, small series or connecting parts, with us you have your projects under control. We manufacture turned parts on modern CNC machine tools (including C axis). (Working range: D = D = 2mm to 350mm, maximum turning length 800 mm..) Look at the examples shown and take it with us. Whether it is a sketch or data in DXF, DWG, etc. format, fax or the classic post, does not matter for us. Submit your requests as desired one. We are looking forward to your "problems" and waiting for your message. We provide rotational parts using off the shelf D 6-52 mm, lining parts up D250 mm, max turning length 500 mm. In small batches, 1 to about 2000 pcs, we produce on Mazak CNC machine tools with driven tools, so that various milling operations are possible. Especially as electrodes specialists, we are highly appreciated by our customers from mold-making industry in the region. We provide the best quality and always "just in time", because our motto is quality at reasonable prices to deliver on time. Our small business makes it economical and flexible working as well as on individually and quickly address the needs of customers.

Mediums and Offenburg is a company that specializes in producing high quality tools, equipment and machine parts. In July 1996, founded by the master craftsmen Werner mediums and Bernd Offenburg as a 2-man operation, the company has developed steadily. Today, it already employs 20 staff who invariably have a qualified skilled worker training and many years of professional experience. Equipped with modern CNC-controlled machines can handle + Offenburg highly complex manufacturing tasks and realize individual solutions for demanding customer requirements conspirator. The customer base of mediums and Offenburg include major companies in the mechanical engineering, sheet metal and plastics processing and suppliers to the automobile industry and medical technology companies throughout West Germany. We see ourselves as a complete finisher of demanding individual parts or assemblies, as well as an extended workbench for individual operations. We have a highly modern machinery, with emphasis on CNC milling and wire EDM. Products and Services: Stamping dies, progressive dies, cutting tools Foaming, vacuum forming molds, blow molding, laminating tools Spare Parts for Electronic Industry / Mechanical Engineering / Medical Technology Mounting devices, test fixtures, jigs and fixtures CNC milling, 3D milling, 5-axis simultaneous, hard milling, HSC milling, free-form surfaces Edelstahlzerspanung (1.4301, 1.4571, other) Processing of special materials (titanium, Ampco, Wirbalit, others) Wire EDM, wire cutting (steel, aluminum, brass, carbide, PCD), for example, extrusion dies, Extrusionmatrizen, knives, punches, other contract work Die-sinking EDM, start hole erosion Surface grinding up to 1000x600x400mm EDM technology

Who we are The service focus of SFK - Schulz GmbH, service, manufacturing and plastics technology - is the small-and large-scale production and distribution of turned and milled parts made of steel, plastics, aluminum, and zinc, as well as the construction of devices and equipment for special purposes. In these areas, we work very closely with operations in the Republic of Lithuania. Here, we see ourselves as an external supplement to the German market and offer for the above mentioned areas complex, cost-effective solutions and our services. We take care of our customers the complete manufacturing and logistics operations of selected individual parts or assemblies. Thus we are able to realize complete solutions at a high technical level. On our website, we provide only a small part of our extensive service offer whereas Get personal advice from us we will find a suitable solution for your request.

Joyson Safety Systems PlasTec is located in Albertshausen near Bad Kissingen in the middle of Germany. We have been a competent and experienced partner for the automotive industry since 1986 and have specialized in the development and production of technical plastic parts. Our machine park covers a wide range of production processes. With over 60 machines with clamping forces between 18 and 4,000 tons, we are able to produce products in a wide variety of sizes for our customers. We cover all conceivable product sizes, from filigree small parts to the complete truck front. We would be happy to accompany you from the new development to the creation of the tool concept to series production.

Description: At Tubec metalworking we specialize in stainless steel processing. EXPERIENCE. More than 10 years working in stainless steel processing. Types of Material. We can process most common materials such as: stainless steel, steel, aluminum, brass and plastic. Series size. The size of the series that we prefer to work with is 50 to 400 pieces. Diameter size. Around 8 to around 100mm are the diameters we work with. Because of our flexibility and no nonsense, we are able to deliver the assignment, within the agreed time.

Welcome to E-mont doo - your subcontractor for high-quality and complex milled parts for mechanical engineering and industry. General mechanical engineering is one of the oldest areas of engineering. We specialize in the production of single parts and small series in machine and fixture construction for industrial companies. We manufacture all products according to the plans of our customers.