As a production partner to Original Equipment Manufacturers for more than 50 years, Optiwa B.V. (Optiwa) supplies our customers with precision mechanical parts and mechanical assemblies. Optiwa's critical success factors lies in its efficiency, design for manufacturing (DFM) support and a highly efficient production of products to tolerances in the sub-micron range. A team of skilled personnel ensures an uninterrupted production flow of products that meet specifications, quality and delivery commitments - time and time again. Optiwa is your first choice partner for series production of very accurate and complicated products at the right cost. Capabilities * Range of state-of-the-art machining centres * Turning and milling of very small parts to big parts up to 800mm * Range of robotized machines for production 24/7 (minimum supervision and lower production cost) * Sub-micron technology * Precision mechanical assemblies (vacuum cleaned, where necessary) * Series production up to thousands per annum * Controlled environment measuring department * Excellent supply base of surface and thermal treatment services * Design for manufacturing (DFM) support

Due to our manufacturing depth we are to take to the production of the complete assembly in a position all the tasks of developing and Konstrukion about the single and series production. Especially in the vacuum and clean room technology grab as many customers back on our experience and manufacturing technology.

ZSO sees itself as a competent supplier and service provider in the metal Zerpanung (turning, milling, grinding) and component assembly. In the area of contract manufacturing (turning, milling, grinding and surface treatment), we offer our services from small series to medium runs with great variety. Here, the annual volumes of 5,000 St. can (with high complexity, Dreh-/Frästeil 50 min processing time) vary up to 1.4 million St. (simple turned part, about 1.5 min. Processing time). The possible workpiece sizes reach the maximum diameter of 400 mm when turning. In radial grooves on the outer contour may occur reduction of the workpiece diameter. During milling, we can work with our machining centers cube sizes up to 1000 mm. We also perform desired by impermeability tests also. The company ZSO GmbH is a company of senata GmbH (www.senata.de), an owner-managed medium-sized companies with a high share of equity.

Our company is located near Olomouc (Czech Republic). We are a pure job shop (production according to drawings) in the area of apparatus, pressure vessels, Schweißkontruktionen, container, steel processing Our production scope ranges from individual components (tube plates, jacket flanges jacket shots etc ...), assembly production (preheaders, housing, bundle) up to complete production. We manufacture quickly and flexibly in very good Quality according to drawings.

The Preuss Metallverarbeitung GmbH from Saxony Anhalt has been a competent partner in the field of mechanical engineering. As contract manufacturer, we provide complete services from one source. We support our customers in various industries with a comprehensive service from single parts to assembly production aside. As a privately owned company and thanks to our many years of skilled workers team, we guarantee all sides reliability, quality and flexibility. Our company's success is based on that we constantly adapt to the market and expand our production capacity steadily. We have built in recent years, a complete system of metalworking, from planning, design, manufacture and surface treatment in the form of powder coating or wet painting to installation. Through the three-layer capacity of our machines and equipment we are able to respond in the short term to customer requests. Equipped with modern CNC machines we can even produce complicated components made of steel and special materials with the highest precision. These components and modules are available for global well-known enterprises of mechanical engineering. As a reliable supplier for us is the quality assurance highest bid. Therefore, our quality management is certified according to ISO 9001 standards. We also have the great proof of suitability for MAG and TIG welding. Preuss Metallverarbeitung GmbH, your reliable partner for the metal fabrication sector, headquartered in Linda, Jessen and Buschkuhnsdorf. Translation by Google Translate

Production of turned and milled parts according to drawings, data sets or sketches.

We are a family business since 1997, which supports you in outsourcing your manufacturing. Pre-assembly, final assembly, inspection, post-processing, packaging, labelling. Since 1997 we are helping our customers to save resources and increase their flexibility in production. We are a family-owned company specializing in effective outsourcing measures in manufacturing. We offer our industrial services in the Stuttgart area for the electrical, automotive and mechanical engineering industries. We help you to work reliably and straightforwardly, flexibly and dynamically by supporting you in outsourcing your production. In addition to pre-sorting, we also take care of the assembly and installation of your products. From screwing, gluing and welding to functional testing and proper packaging, we take on a wide range of activities: - Testing and inspection work - Assembly and finishing work - sorting work - Packing and labelling Our team consists of around 35 motivated employees, who have a lot of experience in the practical execution of assembly, testing and selection work. We are happy to place our personnel capacities at your disposal in our company. Our values: - Reliability, excellent quality and very high delivery reliability are a matter of course - Flexible and dynamic, changes and adjustments are carried out according to your wishes - Fast, decisions can be made quickly due to a very flat hierarchical structure -Customer-oriented, your satisfaction has the highest priority uncomplicated, you determine the basic conditions As we have a lean structure, we can offer our services at attractive conditions. Benefit now from our years of experience and contact us with a non-binding inquiry. We would also be pleased to introduce ourselves personally to you.

At L + M, every customer will find their own “menu”! Whether contract manufacturing, either carried out in Switzerland or Slovakia, or overall projects from advice to the installed product. L + M = A la card - customer in focus! No matter how you decide, you will receive personal advice from us, the person responsible for sales remains your personal contact person until delivery. Market services: our competencies - your benefit Advice: We develop solutions from one source based on your ideas and needs. Engineering: proof of strength / FEM, 3D-CAD and conformity according to MRL 2006/42 / EG Production: series, tools and special constructions up to 15t or 9mx12m Production: locations in CH and Eastern Europe (> 4'000m² production and storage area) Welding technology: Our SFI + SFM guarantee welding quality at the highest level for steel, stainless steel and non-ferrous metals Quality: Evidence according to EN473 / ISO9712, customer approvals and project documentation Project management L + M Remigen: Excellent network of qualified partners and suppliers. In any case, we are your right contact from the region.

Foundry RAFAMET Ltd provides a comprehensive package of casting services, ranging from analysis and the development of technical documentation, through the execution of pattern units up to casting and machining. We are also offering: shot blasting, heat treatment and repairs as well as laboratory services and measurement. The vast majority of our products are grey and ductile castings for engineering, shipbuilding, energy and mining industries. We specialize in production of iron in the following grades: Cast iron: 200, 250, 300 and 350 according to PN/EN 1561 Weight range 500 – 40.000 kg. Ductile iron: 400-12, 400-15, 400-18, 500-7, 600-3 and 700-2 according to PN/EN 1563 Weight range: 500 – 30.000 kg. Special cast iron, e.g. high alloy castings with additions of nickel and chromium (Ni-hard and Ni-resist) for industries such as: Natural gas Chemical Fuel Heating The production capacity is 7000 tons per year. Stable mechanical properties and low varied hardness of produced cast iron have a great impact on their suitability for structure components for all kinds of metal processing machines. Also, characteristic for cast iron resistance to transfer and damping the vibrations, is one of the biggest advantages of this material. Customers, of each of the manufacturers of modern CNC machining centers always have high quality requirements. This means that the vast majority of manufacturers of metal processing machines, especially those for whom the accuracy, precision and quality of the machines is the most important, uses cast iron as the primary material in their designs. Our products range includes: machine beds, tables, racks, support beams, slides, bodies of horses, carriage bodies, machine bodies, parts of pumps, flywheels, gear box housing, bearing housing, frames and covers for engine. We specialize in large-scale castings made in ground pits with dimensions max. 20000 x 4000 x 2000. Our customers are well-known Polish and foreign companies for which we are reliable supplier from very long time.

Arete was established in 2020 by a group of professionals who are experts on their subjects. Our Vision is to become a competitive international lead company producing filter, maker, and packer machines. Mission: Give the best goods and services to our customers via enhancing the learnings among the organization.

We offer checking, welding and assembly fixtures for vehicle components, for all metal and plastic parts, based on our experience. Over our many years in the automotive market, we have developed a wide range of our design and manufacturing services: – Checking fixtures & gauges, – Stations for semi-automatic assembly, inspection and testing parts – Resistance welding fixtures – Precision custom parts for machines and devices – Moulds for vulcanising rubber hoses.

1. A bit of history - 2017 Bledar Kthupi graduated in engineering. Electronics at the Polytechnic of Tirana in 1998, after approximately 23 years of experience as a turner, miller, reamer and production manager, in various metalworking companies, with the technical and economic support of Suela Llalla, as administrative manager they gave life to the BIKS. - 2018 BIKS offers consultancy service for precision mechanical parts for some of its customers who mainly deal with carpentry. - 2019 BIKS begins to become a supplier by acquiring, developing and supplying orders or finished details in addition to metalworking consultancy. - 2020 BIKS signs a collaboration agreement with Marca&Volta srl for which it will deal by offering a technical-commercial consultancy service for the orders to be outsourced. - 2021 Bledar acquires 10% of the shares of Marca&Volta srl and BIKS srl confirms and improves the performance of its operations. - 2022 Bledar becomes production manager of Marca&Volta and BIKS from January 2022 is entitled to take advantage of 100 hours of machine tools at the Marca&Volta workshop. Erald Miraka began his career at BIKS as an engineer and is still Junior Project Manager and Technical Sales Assistant. - 2023 Begins the collaboration with BIKS, Arlinda Nerguti who deals with Back-Office and market research. - 2024 BIKS is looking to strengthen its results. 2. Mission Biks wants to be the trusted supplier of CNC machined parts, small, medium and large carpentry, of equipment designed and manufactured as needed but above all it wants to be your solution provider. Biks believes in the relationship of trust and mutual growth with the customer-partner, basing the relationship on the use of all its technical-commercial baggage and its professional ethics. 3. BIKS SRL Bledar Kthupi - Ceo-founder // bledar@biks.it - +39 340 905 7248 Suela Llalla - Financial & Logistic // invoice@biks.it - +39 327 079 4037 Erald Miraka - Technical & Dev. // em@biks.it - +355 68 805 5845 Arlinda Nerguti – Back-Office, R&D // linda@biks.it - +39 327 079 4037 4. Short-term goals The commissioning of the platform: MACHISTE.COM which will allow customers to have a guaranteed quote within 48 hours in 75% of cases. The commissioning of the new headquarters with approximately 500m2 indoors and 300m2 uncovered. The completion of the procedures for the acquisition of ISO9001. 5. Why choose BIKS • With Biks you can improve the times and costs of your supply. • With Biks you would have a single interlocutor even for your most complex projects. • Maximum confidentiality of all drawings and projects. • Clear and agreed work cycle. • Agreed technical solutions for every need. • Promptness and punctuality in communications and deliveries. We can produce the simple washer, the gear wheel with induction hardening and 3D profile control and steam seal rings for gas turbines. Obviously, the simpler the product, the easier it is that the possible customer can find it on his own without having to pay BIKS. The more complicated and complex it is, the more likely BIKS is to become the best solution as it is the turnkey supplier of a quality product. 6. In what we are able We are able to supply Turned parts, prototypes, small series or mass production. Minimum diameter 5mm, maximum diameter 1600mm for 18,000mm length. Milled parts in soft steel, stainless steel, aluminum and plastic using 3, 4 and 5 axis milling machines with Maximum capabilities 2000x2000x15.000 Sheet metal parts, cutted by laser, by plasma or by waterjet, punched, bent or calendered. welded parts from Tig Mig or other technologies. BIKS S.R.L. Sede Legale: Via Paolo Gerolamo Brusco 1/4, 17100 - Savona (SV), Italy E-mail: info@biks.it Website: http://www.biks.it VAT/P.Iva : 01867890095

Use of 3, 4 & 5 CNC Mills, Lathes and 3D Printing. Machining various types of materials including Stainless Steel, Non-ferrous alloys and Non-metallics. Please see our Website for Machining Capability and Gallery.

Manufacturer for moulds an dies in single or multi componeten systems

Our production facility is equipped with a machine park, which enables both single-part as well as the small and large-scale production in the area turning, milling and grinding. It consists of a range of manual processing and in the field of CNC processing. Automatic processing is performed on turning and milling centers of the US HAAS. HYDRO MONT has extensive experience in the processing of materials of stainless steel, structural steel, stainless steel, nonferrous metals and plastics, and is happy to put together a deal both from the processing of individual parts as well as from the small, medium and large series production. Translation by Google Translate

We are able to deliver any kind of mechanical parts or assembled units at the time agreed and with budget control, according to the technical specifications required by the costumer, starting from engineering drawings and a bill of materials in any format.

We provide our customers with individual and comprehensive development and design services for fiber composite components. Specializing in individual custom-made products, as well as cost-efficient series production made of GRP and CFRP, we offer our customers the entire development process from the idea to the product.

We deal with custom production on CNC machining centres. We offer our capacities mainly for piece and small batch custom production. We work mainly on the basis of drawings supplied by customers, but we are also able to create drawings ourselves, according to customer requirements. We process a variety of materials, from conventional steel, stainless and tool steel to non-ferrous materials, aluminium alloys, copper, brass, plastics etc.

Experts in Sheet Metal Fabrication / www.smates.mk / info@smates.mk / +389 71 305 806 At Smates, we specialize in precision metal fabrication, operating from a 2,000-square-meter facility equipped with advanced machinery. Each year, we process over 400 tons of metal, providing high-quality services to OEMs and manufacturers across Europe. Our team of experienced engineers and operators can work in three shifts when necessary, ensuring efficient production and minimal material waste to meet demanding project deadlines. We leverage cutting-edge technology, including 3D CAD software and SolidWorks, to design and optimize custom components for our clients. This allows us to deliver highly accurate and efficient solutions, no matter the complexity of the project. Our expertise and reliability have made us a trusted partner for EU-based companies, offering cost-effective and timely results. Our comprehensive range of services includes tube laser cutting, sheet metal bending, and powder coating. With a strong focus on innovation, Smates continuously invests in the latest technology to ensure we deliver the best fabrication solutions, helping our clients achieve their goals.