We are partners of the industry and the craft and produce precision turning - milling - drilling - and grinding parts in single - and series production. Our customers: Special machine, fixture, electrical industry, food industry, pneumatic - hydraulic and plant engineering and standard parts. We are a machine - jigs with CNC machines and automatic lathe with 20 employees. We are specialized devices for chip manufacturing, assembly, and to the manufacture of spare parts for special purpose machines and prototypes. Series production We are certified according to DIN EN ISO 9001 and 14001

The Dr. Dietrich Müller GmbH, based in Ahlhorn (Lower Saxony), has long proven itself as a successful service provider for the manufacturing industry. The focus is on the development and implementation of customized solutions for the manufacturing processes of the respective partners. The Dr. Dietrich Müller GmbH is one of the world's largest suppliers of electrical insulation materials, seals and heat conducting products. The company is certified for quality management according to ISO 9001 and listed as a recognized repackager by UL. This means that all UL-approved materials retain their approval. Solutions for motors and generators We develop, manufacture and supply flexible and rigid electrical insulating materials for motors and generators using materials from leading manufacturers worldwide. All insulation parts can be supplied by us. Solutions for air and oil cooled transformers The insulation system is crucial for the service life and functionality of oil transformers and dry-type transformers.We deliver ready-to-install individual parts and kits. Solutions for electronic products In addition to electrical insulating materials for electrical insulation, we develop, manufacture and supply products and systems for cooling electronics, particularly in the fields of medical technology and aerospace. Solutions for mechanical engineering and vehicle construction Composite materials are becoming increasingly widespread in mechanical engineering and vehicle construction. We support in the development and manufacture of ready-to-install parts and systems. Solutions for batteries and accumulators We supply insulating films, battery separator films and thermally conductive materials. Support for research, development and universities With the multitude of manufacturing processes and available materials, we are the right partner for solving your challenge. We process ul-approved materials from leading manufacturers.

After the restructuring of a named plant and machine operation at the Lübeck site was found in April 2005, the chance for a hopeful new beginning by the foundation. Today, the entire team is almost changed into the company launched. Within the first years of the workforce from 11 has risen to 55 now. The combined expertise and years of experience make RONO to a successful partner. In our company's contract manufacturing guarantee skilled professionals - including engineers, technicians, foremen and skilled workers - from planning, through production, to assembly on a production area of 2500 square meters is an optimal order processing. RONO is the ideal partner in the solution of various tasks in the field of metal processing. We offer the following services: • ROTATE • MILLING • DRILLING • SPECIALIST WELDING-PED Certified HP0-AD2000 • ASSEMBLE • ASSEMBLY PRODUCTION • BEHÄLTERBAU • ROHRLEITUNGSBAU • REPAIR SERVICE Through constant innovation and calculated investment in our machinery RONO was for many companies in the economic region of North became the epitome of modern production technology. Our service focuses on the contract manufacturing using advanced machines, focus on and austenitic and duplex steels, as well as non-ferrous metals and plastics are not alien to us. Surface treatments provide for us is not a problem Our competent performance serves the areas of general engineering, steel construction (frame, racks and welded assemblies

Your supplier in the areas of CNC milling CNC turning Manufacture and assembly of electro-mechanical assemblies The company Aumüller Precision Engineering was founded in 2001 and since then has been mainly engaged in machining and assembly of electro-mechanical assemblies. Our customers Our customers are mainly from the fields of ■ Mechanical Engineering, ■ Precision Engineering, ■ Medical and ■ electronics. Our competencies We manufacture your products according to drawings from the item to the series on modern machining centers. In our assembly department we assemble electromechanical assemblies ready for installation according to your specifications. Our strengths Due to our flexibility, we are able to respond quickly to the needs of our customers and to realize kostengünstigst projects in close cooperation with our customers in the shortest time. Mechanical working in the field: - CNC milling max 1500 x 800 mm - CNC Turning max turning diameter 350mm x 1000 - CNC measuring

ISH offers all types of standard seals also specifically on the application prepared special seals and plastic parts in almost all engineering plastics and elastomers. Where: quality over quantity. We offer the production from a single piece, but do not shy away even before large quantities. Response time is very important to us, so we respond to all inquiries within a short time, at the latest within 24 hours. Our delivery time can still specify in days, often in hours. To round off our product range, we also offer connection technology of the highest quality. All kinds of bolts and nuts with requirements or according to drawing, with acceptance certificate and testing. We cover the following application areas: • Reciprocating Seals o Hydraulic Seals  wiper, rod seal, piston seal, chevron packings, Cup seals, lip seal, Stangengleitring, Kolbengleitring, compact piston seal, o Pneumatic Seals  wiper, rod seal, piston seal, chevron packings, Cup seals, lip seal, Stangengleitring, Kolbengleitring, compact piston seal, • Rotary Seals o shaft seals, rotary seals, V-rings • Static Seals o O-rings, gaskets, packings • Complete gasket sets o for the repair of, for example, hydraulic cylinders Large Diameter Seals up to 4m diameter can also be found with us! • Semi-finished o plates,

We are a contract manufacturer with 84 employees, located in Trier (close to Luxembourg). Our capabilities are: - Precise machining of work pieces with a weight of up to 46 t - Assembly (mechanic, electric, pneumatic) of components or complete machines with crane capabilities of up to 98 t and height of 14 m. Our machining centres have a travelling axis in x of up to 6000 mm, in y up to 3000 mm and take pieces with up to 46 t. Our turning machines take pieces with a diameter of up to 1620 mm and 8000 mm length. Under contract of our customers, we manufacture according to their drawings pieces of various sizes and applications. Gear box housings for various well known gear suppliers, hydraulic presses for the ceramics industry, roller presses for the cement- and mining industry, water turbines, handling units for the foundry industry, hydraulic units etc. cover the range of our possibilities. A welding shop within our factory building can manufacture the required welding components.

We are a Automatic CNC Turnery (founded in 1983 ) that produce precision metal parts, components and assemblies We ensure: - reduced times for the realization of batches - constant quality on each piece - KAN-BAN deliveries, - For delivery, we make use of qualified carriers that offer a quick and safe service on the whole national territory and abroad. We are competitive with batches starting from 100 pieces, on diameters from 2 to 70 millimeters from the bar. Materials utilized: We make use of the best steel mills on the market, to always ensure a perfect performance of our products and we are able to trace each batch. In addition to common and automatic steels, light alloys (aluminium), brass, bronze, plastic, we have gained a large experience on the processing of: - Austenitic stainless steels series “300” - Ferritic and martensitic stainless steels series “400” - Alloys and super alloys, Inconel, titanium, duplex e super duplex - Alloy steels, quenched and tempered steels We manufacture particulars and components for the following sectors, according to the customer’s specific design: • Medical/Biomedical • Hydraulic, fluids flowing • Pneumatic • Packaging, Food Industry, Pharmaceutical • Automotive, Motorcycle and Cycling • Industrial Automation • Railway / Cableway • Electronic • Sustainable Energy • Gardening/Hobby • Earthworks and Agricultural in general • Window and door fixtures Where required, we can carry out the assembly of the Articles, in the specific area within our Production Departments and, for the Medical sector, we have a dedicated assembly hall

The Ospelt & Haas Institution was founded in 2014 by Sandro Ospelt and Angelo Haas. Since then, the company is located in Eschen, Liechtenstein. With focus on the CNC milling technology, we offer not only the manufacture of customer-developed workpieces on the entire processing of an order. We like to take on new challenges and can also manufacture highly complex workpieces thanks to our 5-axis simultaneous machining center. Competence and reliability when machining complex milled parts and module that is what the Ospelt & Haas Institution. We are available for request.