Specializing in cutting and CNC machining of precision parts from a diameter of 4 to 65mm in most metals, our business since 75 years plusd e meets the expectations of the automotive industries and implementing a fluid from pre-series to mass production.

we produce in our wide network. Our focus is on project management and process management. Due to our network, we can deliver inexpensive production in the desired quality. Controlled by professional project management.

1994 has begun as a laser provider to operate on a BBM laser application technology. With a 3D laser system together with teach-in station and a 2D laser machine then started a very young team with an innovative process and offered its know-how of the industry. The high flexibility and quality in the production required an increase in machinery and equipment, which is why the new factory building was constructed at its present location in 1998. Today BBM laser application technology has a broad knowledge in the field of sheet metal production and thus follows the trend for integrated production of parts and assemblies.

Bergmaier Präzision has been a family business in the metalworking sector since the beginning of 1972. The focus is on the production of special and precision parts in which individual customer requirements are taken into account. Individual, prototype and sample parts ranging from the millimeter range to the meter size are thus manufactured in small batches. In over 40 years, the range of editing has grown and the program has become more diverse. Where turned and milled parts were initially produced in a small hall in the backyard, there are now two large halls in the industrial area, where turned, milled and eroded parts are manufactured using the latest technology (up to 5-axis simultaneous milling). Thanks to professional, qualified personnel and cutting-edge machinery, we developed into a progressive, innovative company. Since the company's activities are not only based on continuous improvement of production processes and the introduction of cutting-edge technologies, but also great value is placed on the environment and sustainability, there are photovoltaic systems on the roofs of the production halls and a large heat recovery plant also returns the otherwise lost energy. If you wish, we have all the necessary test documents and certificates for our products. The entire company is certified according to DIN ISO 9001:2015, which we have expanded internally to include an environmental management system (similar to ISO 14004).

ABOUT TC TECHNIC After several years in the general management of a French production site and despite the increasingly complicated economic context, I have decide to start my activity and put my experience to good use. I’m convinced that the machining/assembly can be brought back from Asia to Europe and more preciselly to competitive Romania, a country with a great culture in mechanics. Cut your project’s delivery time considerably by having simplified paperwork, customs and shipping with a partner that speaks the same language, understands your needs and is also following the European Union regulations.

We produce precision parts for you for demanding companies in the mechanical engineering and automotive industries. As a client, you can expect the manufacture of first-class products and absolute reliability.

The RCM ESTECH AG in Burgdorf operates in the field of mechanical production. Turning, milling, drilling, heat treatment and painting. With quality services and custom solutions, the company has developed an excellent reputation.

The company Adolf Brodbeck GmbH + Co. KG was founded in 1929 in Metzingen-Neuhausen at the foot of the Swabian Alb. Today we can look back as middle class family on a successful company history - we have developed into authoritative and powerful manufacturer of special machines and equipment! Brodbeck- machinery and equipment used for winding, cutting, drying, handling and processing of sleeves of paper or paperboard or for cutting sleeves of plastics. When sleeve manufacturers, printers, film producers and paper mills at home and abroad, our machines are in use. Everywhere they enjoy an excellent reputation, which is due to the reliable and robust design, and the high quality standard and the constant innovation and reliable service. We use our personal and technical expertise to meet the diverse customer needs and to ensure a cooperative customer care. A future-oriented and experienced management together with the highly qualified staff and employees the important foundation that developed and manufactured in our home machines set in the future in terms of technological requirements and innovation yardsticks.

Metal products, metal parts and plastic

Personal identification, loyalty to our employees and grown, long-term customer relationships are the success factors of our family business. For over 2 decades, our experience and our expertise grows. Consistent customer orientation provides you the freedom to concentrate on your projects. With us, your order is in good hands.

Welcome to KOCHs Tooling Family-owned company and system partner System partner with full service, more than 50 years of experience and state-of-the-art machinery, tool and special machine construction, series production and tryout — KOCHs Tooling offers a complete range of certified quality services. With the consistent CAD and CAM structure, from 3D design and work preparation to production and assembly, we guarantee maximum efficiency, even for small quantities. We develop, design and produce flexibly and cost-effectively — from individual parts and assemblies to devices and special machines in steel and non-ferrous metals. As a family business, we have continuously developed on the basis of our experience. In this way, we combine continuous innovation with a long-standing tradition, which is expressed in our value orientation. Personal proximity to our customers and partners is just as important to us as responsibility for our employees and the Wuppertal location, where we are now in the 3rd generation of work.

The company was founded in October 2022. The main types of activity are the production of parts for various industries, as well as the provision of metalworking services. Our production is equipped with modern 5-axis CNC milling machining centers from DMG. We offer a wide range of services, including the design and modeling of parts according to the drawings and sketches of our customers, the provision of consulting services, and the manufacture of parts of varying degrees of complexity. We provide 3-, 4-, and 5-coordinate milling services on CNC machines with an accuracy of up to 0.01 mm.

Construction - sample production - volume production of turned and milled parts

Our innovative mechanical engineering company offers services and solutions in CNC milling and turning, production of special machines, devices and welded constructions with subsequent processing according to customer requirements. MECHANICAL ENGINEERING The main focus of our production is the fast and reliable processing of customer projects with all milled, turned and welded parts in all surfaces and heat treatments. In the field of mechanical engineering, we take on customer-specific projects. MACHINING Our qualified team has many years of experience in complex machining for mechanical engineering and parts production and uses the most modern machines in all production areas. We manufacture special products according to individual requirements and specifications.

The Hess Maschinenbau GmbH was founded in 1980 and is headquartered in Wittighausen. We manufacture our wide-ranging production program with a modern machine park. Turning, we use four vertical CNC - Food - Lathes one of a diameter of 20 -250 mm and a length up to 1000 mm. A double spindle lathe with short bar loader, EEZ. and Y-axis. In addition, 3 Pick-Up lathes up to diameter 120 x 80mm. In the area there are 3 milling machining centers with cutting length up to 3000 mm and with up to 4 axes. Our product range includes rotary or milled parts of different sizes made of stainless steel, general steel, cast iron and non-ferrous metals. With timely orders (of lot size and delivery dependent), we guarantee 100% delivery performance. The order management and delivery monitoring is ensured by our individual computer system. Our lot sizes range from small series up to kanban-controlled large scale production. We currently employ 10 staff and two apprentices. If you are interested in working with us, please send us inquiries with drawings or samples to pieces. We will promptly answer your request with an offer

You don't have to reinvent the wheel And if you do — we're there! Technical progress places high demands on gears and drive technology — a challenge for people and materials. With professional expertise, grown over 85 years, Paul Fischer GmbH is your reliable specialist for the production of: Spur gears of all types Worm wheels and snails sprockets bevel gears Toothed belt wheels Racks Turned parts and components for drive technology Our performance, the latest CNC machines and special manufacturing techniques guarantee you tailor-made solutions highest precision and quality cost-effective production short delivery times The diverse use of our products requires the processing of different materials and the use of different hardening processes. That is our strength! In this way, in addition to the standard, we also create very special solutions for you. And if you don't turn any more, we can help you with our repair service! Fast, competent and reliable. Get in touch with us right away or call us on 0202-80544

The company “Hafelder Kunststoffwerk” was founded in 1945 by Mr. Ing. Zittmayr in Hafeld (Upper Austria). Back then, only plastic injection machines were used (source drinking basin production). In 1990, the company was acquired by Friedrich Gruber and continued to operate as a plastic injection moulding plant. Later, the first spare parts for spring basins were produced in-house. (First machine - Emco 342S). More and more lathes were gradually purchased, including two machining centers. From 2000, the company moved to the new premises of a former office furniture factory. Currently, around 100,000 turned parts are manufactured every month from a wide variety of materials such as brass, stainless steel, copper, cast iron, plastic, titanium, steel, etc. In 2002, another turning shop (Ing. Arzberger in Trumau), including machines and customers, was taken over. As a result, our company was almost doubled in size and renamed Hafelder Präzisionteile GmbH. In recent years, production has increasingly switched to special, turned and milled parts and mainly parts have been manufactured which must meet high requirements or have very low tolerances in the thousandths range.