Since the founding of the KVR GmbH in 1959 we have grown into a company that has specialized in the fields of activity, pneumatics, CNC machining of metals, plastics processing and tool construction, including the construction. Our national and international clients operating in the fields of medical technology, mechanical and plant engineering, automotive industry, chemical industry, construction industry, and in all other areas of industry. The KVR today employs 130 people.

As a production partner to Original Equipment Manufacturers for more than 50 years, Optiwa B.V. (Optiwa) supplies our customers with precision mechanical parts and mechanical assemblies. Optiwa's critical success factors lies in its efficiency, design for manufacturing (DFM) support and a highly efficient production of products to tolerances in the sub-micron range. A team of skilled personnel ensures an uninterrupted production flow of products that meet specifications, quality and delivery commitments - time and time again. Optiwa is your first choice partner for series production of very accurate and complicated products at the right cost. Capabilities * Range of state-of-the-art machining centres * Turning and milling of very small parts to big parts up to 800mm * Range of robotized machines for production 24/7 (minimum supervision and lower production cost) * Sub-micron technology * Precision mechanical assemblies (vacuum cleaned, where necessary) * Series production up to thousands per annum * Controlled environment measuring department * Excellent supply base of surface and thermal treatment services * Design for manufacturing (DFM) support

ZSO sees itself as a competent supplier and service provider in the metal Zerpanung (turning, milling, grinding) and component assembly. In the area of contract manufacturing (turning, milling, grinding and surface treatment), we offer our services from small series to medium runs with great variety. Here, the annual volumes of 5,000 St. can (with high complexity, Dreh-/Frästeil 50 min processing time) vary up to 1.4 million St. (simple turned part, about 1.5 min. Processing time). The possible workpiece sizes reach the maximum diameter of 400 mm when turning. In radial grooves on the outer contour may occur reduction of the workpiece diameter. During milling, we can work with our machining centers cube sizes up to 1000 mm. We also perform desired by impermeability tests also. The company ZSO GmbH is a company of senata GmbH (www.senata.de), an owner-managed medium-sized companies with a high share of equity.

At L + M, every customer will find their own “menu”! Whether contract manufacturing, either carried out in Switzerland or Slovakia, or overall projects from advice to the installed product. L + M = A la card - customer in focus! No matter how you decide, you will receive personal advice from us, the person responsible for sales remains your personal contact person until delivery. Market services: our competencies - your benefit Advice: We develop solutions from one source based on your ideas and needs. Engineering: proof of strength / FEM, 3D-CAD and conformity according to MRL 2006/42 / EG Production: series, tools and special constructions up to 15t or 9mx12m Production: locations in CH and Eastern Europe (> 4'000m² production and storage area) Welding technology: Our SFI + SFM guarantee welding quality at the highest level for steel, stainless steel and non-ferrous metals Quality: Evidence according to EN473 / ISO9712, customer approvals and project documentation Project management L + M Remigen: Excellent network of qualified partners and suppliers. In any case, we are your right contact from the region.

 High tech manufacturer of Plastic and metal parts as well as assemblies  Number of items 1 250,000 pc / a  Headquarters near Frankfurt (  Automotive IATF 16949  Aviation DIN EN 9100  Customer industries  Automotive  Aviation  Medical technology  Consumer / Lifestyle

THE VISIOTECH PROCESS, MATERIAL + PROCESS WORLD Single or series parts? We manufacture plastic + metal parts for you from a quantity of 1. It is irrelevant whether 3D printing, vacuum casting, rapid tooling or CNC production. Due to our own large machine park and partner network, we can advise and manufacture economically and technically according to your requirements regardless of the process. Module assembly? We assemble the parts we produce with delivered or purchased products in our assembly hall ... also with defined processes. 3D scan? We can also do the other way around. From real ... to digital ... with our 3D scanner and CAD department to construction data. Product development? Housing, gripper, wall clock, ... we are not designers but experienced inventors! PROCEDURE / PROJECT FOUND? WE THINK + MANUFACTURE IN PROCESSES and PRODUCTS! The art of combining processes, materials and customer requirements ... The manufacturing processes: VISIO Basic, eco, Fast + Series

"UNIS-matic" z.d.d. is company located in Bugojno, Bosnia and Herzegovina. The company has 4250m2. 2500m2 is ground floor. On the ground floor there are machines, quallity control, tool storage etc. Our company is based on turning and milling operations. We have cnc lathes and milling machines. Also, we can create documentation in 2D and 3D dimension.

Since 1988 we have been a recognized workshop for mentally handicapped people who, due to the type and severity of their disability, cannot be employed on the general labor market, or can no longer or not yet be employed again. In our metal processing we have the possibility to produce turned and milled parts on modern CNC lathes and the 3-axis machining center. In addition, we can offer cuts on vertical circular saws and band saws. In addition to metal processing, we have several assembly and packaging groups at our site where parts can be assembled and packaged. compensatory levy According to the Social Security Code (SGB) IX § 71, every company with at least 20 employees is obliged to employ severely disabled people. The employment rate is 5%, so that for every 20 employees, one severely disabled person has to be hired. If this percentage is not reached, a monthly compensatory fee must be paid. An order placed with the St. Josefs-Werkstätten Plaidt helps you to minimize these costs or save them entirely, since you can offset 50% of the work included in our invoice amount against the compensatory levy to be paid. The respective amount is shown separately on the invoice and can therefore be used immediately as a certificate for the integration office.

1. A bit of history - 2017 Bledar Kthupi graduated in engineering. Electronics at the Polytechnic of Tirana in 1998, after approximately 23 years of experience as a turner, miller, reamer and production manager, in various metalworking companies, with the technical and economic support of Suela Llalla, as administrative manager they gave life to the BIKS. - 2018 BIKS offers consultancy service for precision mechanical parts for some of its customers who mainly deal with carpentry. - 2019 BIKS begins to become a supplier by acquiring, developing and supplying orders or finished details in addition to metalworking consultancy. - 2020 BIKS signs a collaboration agreement with Marca&Volta srl for which it will deal by offering a technical-commercial consultancy service for the orders to be outsourced. - 2021 Bledar acquires 10% of the shares of Marca&Volta srl and BIKS srl confirms and improves the performance of its operations. - 2022 Bledar becomes production manager of Marca&Volta and BIKS from January 2022 is entitled to take advantage of 100 hours of machine tools at the Marca&Volta workshop. Erald Miraka began his career at BIKS as an engineer and is still Junior Project Manager and Technical Sales Assistant. - 2023 Begins the collaboration with BIKS, Arlinda Nerguti who deals with Back-Office and market research. - 2024 BIKS is looking to strengthen its results. 2. Mission Biks wants to be the trusted supplier of CNC machined parts, small, medium and large carpentry, of equipment designed and manufactured as needed but above all it wants to be your solution provider. Biks believes in the relationship of trust and mutual growth with the customer-partner, basing the relationship on the use of all its technical-commercial baggage and its professional ethics. 3. BIKS SRL Bledar Kthupi - Ceo-founder // bledar@biks.it - +39 340 905 7248 Suela Llalla - Financial & Logistic // invoice@biks.it - +39 327 079 4037 Erald Miraka - Technical & Dev. // em@biks.it - +355 68 805 5845 Arlinda Nerguti – Back-Office, R&D // linda@biks.it - +39 327 079 4037 4. Short-term goals The commissioning of the platform: MACHISTE.COM which will allow customers to have a guaranteed quote within 48 hours in 75% of cases. The commissioning of the new headquarters with approximately 500m2 indoors and 300m2 uncovered. The completion of the procedures for the acquisition of ISO9001. 5. Why choose BIKS • With Biks you can improve the times and costs of your supply. • With Biks you would have a single interlocutor even for your most complex projects. • Maximum confidentiality of all drawings and projects. • Clear and agreed work cycle. • Agreed technical solutions for every need. • Promptness and punctuality in communications and deliveries. We can produce the simple washer, the gear wheel with induction hardening and 3D profile control and steam seal rings for gas turbines. Obviously, the simpler the product, the easier it is that the possible customer can find it on his own without having to pay BIKS. The more complicated and complex it is, the more likely BIKS is to become the best solution as it is the turnkey supplier of a quality product. 6. In what we are able We are able to supply Turned parts, prototypes, small series or mass production. Minimum diameter 5mm, maximum diameter 1600mm for 18,000mm length. Milled parts in soft steel, stainless steel, aluminum and plastic using 3, 4 and 5 axis milling machines with Maximum capabilities 2000x2000x15.000 Sheet metal parts, cutted by laser, by plasma or by waterjet, punched, bent or calendered. welded parts from Tig Mig or other technologies. BIKS S.R.L. Sede Legale: Via Paolo Gerolamo Brusco 1/4, 17100 - Savona (SV), Italy E-mail: info@biks.it Website: http://www.biks.it VAT/P.Iva : 01867890095

Use of 3, 4 & 5 CNC Mills, Lathes and 3D Printing. Machining various types of materials including Stainless Steel, Non-ferrous alloys and Non-metallics. Please see our Website for Machining Capability and Gallery.

TINTEC Metal Technology is a certified welding specialist [DIN 3834-2, ISO 9001 iV] for holistic, sophisticated technology and complex welding sheet metal assemblies in steel, stainless steel and aluminum. We specialize in sheet metal fabrication for housing, container & industrial equipment, tanks & tanks, ducts & pipes / flanges and allocations, as a complete assembly with in-house development and design as well as our own production. Production chain with complete sheet metal technology from cutting (laser cutting, punching, shearing, burning) on the deformation (edges, bending, forming, rolling, rounding) with core expertise joining (GMAW, TIG welding, soldering, bonding) to the surface (grinding, brushing, galvanizing, paint / powder). Massive steel construction welding assemblies & to 6 tons with welding qualification according to DIN EN 1090-2 EXC 3 Complete production from one source from prototypes & item to small - medium batch & high quality craftsmanship at a reasonable price level with expert advice and customer care. The company was founded in 2006 with 10 employees is dynamically grown into a SME with now 45 qualified employees - from trainees on skilled workers, foremen and technicians to welding specialist and Welding Engineer. Currently, about 3,000 square meters of production area with stainless steel / mild steel separation and 15 integrated welding workstations for manual and semi-automatic MIG / MAG & TIG welding. (& Conveying equipment Food - - & Beverage, tobacco processing, filling,), air - space, ship, - & yacht building, vehicle and machinery - equipment - Regional and nationwide are demanding customers in the food industry & Apparatus reliably and continuously served.

We are Specializing in the manufacture of turned and milled parts on CNC machines, and offer Single and series production of all machine components. Contract manufacturing on new CNC lathes and CNC machining center. Of repairs of machine components. our products Our specialty is in the rotation, where we can offer good and Cheap work with our lathe including bar loader and driven tools (numbers from 30 to 50,000 pieces). On the CNC machining center, we can also manufacture larger parts. Inlaid work of individual parts and larger numbers (up to 5000 pcs) are possible. Short delivery times are guaranteed. Products and processing Lathe parts CNC - Double spindle of diameter 10 mm to 60 mm length of 150mm Turned on the NC - machine up to diameter 330 mm and length up to 1800 mm Milled parts on the machining center of x-1200 y 650 z 650 mm Material processing There are processed in our steels S355 JRG and all CK35 CK-60 steels and high-quality stainless steels quenched and tempered steels, brass, bronze, aluminum and plastics. Processing methods Our CNC machines allow a complete machining of complex components. our Lieferbrogramm Turned parts, milled parts, bolts, screws, nuts, standard parts, sleeves, distances, plugs, shafts, axles, tubes, bearings, studs, rollers, hubs, washers, bolts, bushings, glass holder for the Fasadenbau clamping elements wedges keyways threaded plates, drive shafts, gears, sprockets, bushings, bronze bushings, caps, collars, collars, dowel pins, studs, Locking screws, special screws ....... Surface treatment Chrome plating Gilding Zinc plating In addition, we offer the following technologies: Inert gas welding Pulses including CNC rotary table rotary welding locksmith

UMI (Uitgeest Mechanische Industrie) is a high-tech machine factory with ISO 9002 certification and space travel approval. The company specialises in the manufacture of high-quality finished products, their assemblies and the associated components. Many finished products originate from the development that UMI carries out for its clients. Rapid prototyping by means of a CAD/CAM coupling is one of the advanced techniques in which UMI is proficient. UMI is partner and producer to clients in the following sectors: general mechanical engineering, space travel, consumer electronics, medicine, astronomy and the automotive industry

We are your specialist for pressing, stamping and deep drawn components for all levels and materials, welding (MAG, TIG, resistance welding), laser machining, nibbling, edging, drilling, tapping, processing all surface finishing, component assemblies.

Welcome to FMT Installation, Servicing and Industrial Plant Manufacturing The FMT Group has set new standards in the field of installation and servicing of industrial plants. In addition, FMT shows competence in the field of planning and construction of machines and plants. FMT takes responsibility for a smooth project development and accompanies you along the entire life-cycle of your plants.

Precision turned parts in titanium-inox-steel and high-strength aluminum

Experts in Sheet Metal Fabrication / www.smates.mk / info@smates.mk / +389 71 305 806 At Smates, we specialize in precision metal fabrication, operating from a 2,000-square-meter facility equipped with advanced machinery. Each year, we process over 400 tons of metal, providing high-quality services to OEMs and manufacturers across Europe. Our team of experienced engineers and operators can work in three shifts when necessary, ensuring efficient production and minimal material waste to meet demanding project deadlines. We leverage cutting-edge technology, including 3D CAD software and SolidWorks, to design and optimize custom components for our clients. This allows us to deliver highly accurate and efficient solutions, no matter the complexity of the project. Our expertise and reliability have made us a trusted partner for EU-based companies, offering cost-effective and timely results. Our comprehensive range of services includes tube laser cutting, sheet metal bending, and powder coating. With a strong focus on innovation, Smates continuously invests in the latest technology to ensure we deliver the best fabrication solutions, helping our clients achieve their goals.

We are a Turkish manufacturing company based in Istanbul and specialize in high-precision processing of complex components using 5-axis CNC technology. We produce individual parts, small and medium-sized series for the aviation, medical, mechanical engineering and special plant construction industries. Our production includes complete CNC processing, including milling, drilling and 3D contour milling using the latest machines. All parts are 100% tested and delivered including material certificates and measurement reports. We deliver your parts directly to your factory — without additional customs or transport costs. Thanks to our location in Erlangen (Germany), we can communicate quickly, flexibly and directly.