Sulzer Innotec at a glance Facts & Figures Sulzer Innotec, for 60 years, the research and development center of Sulzer, performs contract research and specialist technical services and makes significant contributions to the strengthening of the divisions and the development of new business areas of the Sulzer Corporation. Quality According to the principle of continuous improvement, a process-oriented, integrated management system has been created at Sulzer Innotec, it includes the relevant elements for a sustainable development of health, safety, environment and quality. History End of the 40s were in demand with the introduction to the gas turbine development of new technologies, about the time did not have the Sulzer Corporation in sufficient measure. Thus was laid with the creation of central bodies for materials and fluid mechanics, the foundation stone for the future corporate research.

Our core competence is the complete production of complex parts in high quality for the machine and tool. This leads us rather to class instead of mass of: With lot sizes from 1 to 100 with high vertical integration, we are in our element. Whether pilot production, 5-er-lot size or prototypes - when it comes to quality, accuracy and problem solving, you should seek our services. We specialize in the complete production of individual parts and small series for general machines, jigs and fixtures. Our 30 employees work in a two-shift operation, so we can guarantee a high level of flexibility. Who want to make it must create. All the better if you do it gladly. Just as we: With 30 employees in two-shift operation. Certified to DIN EN ISO 9002. And still looking for improvements in AV, manufacturing and customer service. Perhaps it is due to our company's history.Actually there is the CNC production GmbH for over 30 years. As long as she was the CNC workshop of the TBT deep drilling. Your job: pilot series and small series and prototypes for special machine. When the TBT change of ownership, the department should be dissolved. The former production manager Franz builder acquired the majority stake and took over the management. Since then, the company has grown 50% Bonus, 25% revenue increase, five new employees - the numbers speak for themselves. From the former Department a successful company was. The recipe for success? A rehearsed, down to earth team, an uncompromising attitude to quality and the right mix of experience and youth.

Modern and future-oriented The traditional company Hiby Since the middle of the century 19.ten we set standards in terms of quality and durability. With the will to innovate and the steady response to new markets, we are also now one of the sought-after and well-known companies. With continuous expansion of its core businesses, we act as Hiby group in fusion with the ELAFLEX as an ultra-modern manufacturing company in the field of SAND CASTING for aluminum castings, gunmetal and Pipe Fittings, as well as for the installation of assembly modules on national and international markets. We are characterized by a high degree of vertical integration, including machining and assembly. Our customers come from all areas of the vehicle, machine and plant construction, from the electrical, installation and environmental engineering. All tools are designed and manufactured in our own tool model and fixture. This resource and our know-how we offer as a service.

The company Frentech Aerospace sro, now one hundred percent in the Czech owned, was founded in 1994 to be with the aim to become a qualified and competitive suppliers in the field of precision engineering. Initially, the products were targeted in the field of medical technology, microelectronics and special machines, including the delivery of spare parts.

Since 1952 WSK "PZL- Kalisz" S.A. has been representing Polish aircraft industry and manufacturing aircraft piston ASz-62IR and AI- 14R engines. They are designed to power the following airplanes: An-2 and M-18 “Dromader" (ASz-62IR) and respectively PZL-101 “Gawron” and PZL-104 “Wilga” (AI-14R). These engine types have been worldwide recognized for their quality and awarded numerous quality certificates issued in the USA, Canada, Brazil, People’s Republic of China. They have been produced in thousands and have proved failure free thus clearly evidencing their highest reliability and performance quality. WSK “PZL-Kalisz” S.A. also overhauls and performs repairs of ASz-62IR and AI-14R engines. In addition, the Company manufactures and repairs assemblies and parts of TWD-10B engine for An-28 aircraft. WSK “PZL-Kalisz” is a joint-stock company (own capital is 85 mln PLN and paid-up capital is 45,86 mln PLN) operating on the basis of the Commercial Company Code. Principal shareholders of the Company are as follows: - Industrial Development Agency 75,45% - Company employees 11,59% - SEMA Sp z o.o. 6,25% - the City of Kalisz 1.35% - Energy Plant "Energa S.A." 1,20% - Other shareholders 4,16% WSK “PZL-Kalisz” is a capital group composed of the mother company and its 2 fully-controlled subsidiaries: - ZOT “NARZĘDZIOWNIA WSK” Ltd. - PPUH „MECHANIK” Ltd. WSK „PZL-Kalisz” S.A. is the company of the essential importance for the Polish economy and is considered as part of the Polish Defence Industry Potential. As a result of the Company's restructuring process WSK "PZL- Kalisz" S.A. has extended its business into wide range of manufacturing programs and servicing activities including production of high pressure engine parts, oil pumps, gears, aircraft screw gears, turbochargers, push rods, pump housings and first of all crankshafts for high pressure engines. All these components require high precision machining in performing special requirements of its customers. WSK "PZL-Kalisz" S.A. maintains business relationship with well-renowed companies such as: General Electric Transportation Systems, Allison Transmission, Turbomeca, Sulzer Textil Switzerland, Pratt & Whitney Kalisz, and many others. Part of the Company production is designated for military aviation. The Company aim and priority is focused on meeting the Customer’s requirements that can be with WSK "PZL-Kalisz" capacities. WSK “PZL-Kalisz” S.A. acquired modern machinery operated by highly qualified and experienced technical staff. The Company continuously seeks new Customers and Suppliers especially in the manufacturing of precise and aviation components requiring high precision processing. Interested partners are always welcome. In 1999 the Company was awarded ISO 9001-2000 Certificate. In 2000 the Company was granted PART-145 Certificate. The following year – 2001, the Company attained PART-21G Certificate. In 2002 the Company was awarded AQAP-2110 Certificate. In 2004 WSK “PZL-Kalisz” S.A. was granted a license by The Polish Ministry of Internal Affairs and Administration for manufacturing and trading products and equipment for military and police force application as well as transfer of technologies. In 2009 the Company was awarded AS 9100 Certificate.

We are a family company from a small village Prekopa in Vransko community. We have been active on the market since 1993 and we have been trying to adjust to the market and clients’ wishes since then. S&A Company was established with the purpose to produce all kinds of tools but we also offer other services such as production of all kinds of roughing jaws and mechanical parts in metal industry. We are active on the domestic and foreign market. We mainly export to Austrian market where we have been successfully doing business with bigger Austrian companies that value our quality and affordability for 15 years. Our company has been technologically modernised recently, and in this way it is also capable of producing even the most demanding projects in the field of machinery industry.

General mechanical engineering is one of the oldest areas of engineering. We specialize in CNC machining technology for small and medium-sized industrial companies. In most cases, we manufacture products according to the plans of our customers, but are also active in other areas of mechanical engineering, eg. B. fixture construction.

Year of establishment: 1954 Delivery: 129 425 t Sales: EUR 289 million Export: 86% Sales / Employees: 293,000 EUR Owner: ELES 80% (ELES is the Slovenian state-owned electricity producer) Employees: 988

The Helmut Rübsamen Company Stands for 40 years of experience in non-cutting metal machining. That means: The highest competency in shaping technology, every conceivable piece of machinery based around sheet metal machining and renowned clients in all key areas of industry.

As a company of the tool and machine that complements its range with a selected trading range, we offer: * Devices of all kinds * Special machines for different applications * Cutting Tools * Inspection Equipment * Assemblies for mechanical engineering * Control equipment for plant * Contract manufacturing of our machinery Experienced engineers and skilled workers guarantee qualfizierte solve challenging machining tasks in high quality. As a young company we prove us since 1992 on the market of machinery and equipment. Our manufacturing profile: A powerful machinery enables the realization of almost all machining tasks in turning, milling, grinding and drilling. In the cutting tool making, our strength lies in the production of cutting tools for electrical engineering, such as complete sections up to a size of 1000x800 mm, Tip-cuts for cutting machines and follow-cutting tools. We build special machines according to customer requirements with pneumatic or hydraulic control. A welding department manufactures lightweight steel construction for our customers with sheet metal work.

h1> Business /h1> We are a development partner and manufacturer of cast products of light metal for the automobile industry. The economic strength of our company is to be the basis for expanding our market presence and to enhance our Innovation and competitiveness. As a growing international group of companies, we strive for the highest Customer satisfaction through value-oriented service and partnership with our customers and supplier partners. Our company-wide quality-lived, environmental and work-safety-oriented Management System strongly supports the fulfillment of our corporate responsibilities. Raw materials, energy and water we use to conserve resources sparingly. We continually improve the environmental impact of our production processes and workflows with the aim to reduce the waste and emissions. Each employee ensures the Compliance with applicable legal obligations for our company. Motivated and qualified employees are the foundation of our success and the driving force for continuous improvement of our processes. Information and training are prerequisites for economic and quality-and environment-conscious thinking and action. In our society, social and environmental responsibility, we are righteous, we have a world of work create, to which our employees can be proud of and that allowed them to personal development.

In Reggio Emilia in 1935 founded in the form of a hand advertising drive. The company G. Guerra Group spa has gained considerable importance, and not only on the national territory. She is a Synoym of expertise, service and quality. It consists of 4 different autonomous separate Podukteinheiten: Press Production, production of sleeves, profiles and hoses; preparation of mixtures and production machining. The company has about 80 employees and this at a total area of approximately7,000 m2. The technical industrial progress is nowadays a considerable amount of raw materials available, ie natural rubber, synthetic rubbers and other specific additives by the company G. Guerra Group spa are selected between the manufacturers and distributors with an international reputation. For these commodities, G. produces Guerra Group spa with its own formula over 400 mixtures of a variety of types to meet the needs of customers in terms of the mechanical properties of tensile strength, tear resistance, friction resistance, compressive strength, elasticity, bending stiffness, aging resistance, liquid, heat, fire and satisfy cold resistance, as well as the conditions of the electrical insulation to kšnnen. The competence of the company G. Guerra Group spa begins with † HECK of the project of the sought-after part to realization with the Affordable equipment. It makes use of various manufacturing processes

“Facchini Francesco” is an Italian company specialized in manufacturing pipes metal. The automotive sector is the target market of the company that has been operating since 1949; we manifacture mass products as well as small batches and prototypies and consider the customized solutions as crucial factor success. The metal pipes for fluid conduction (hydraulic, air, water, oil extraction, oil dipstick tube) for exhaust systems, for air conditioning or structural elements (struts, platforms, handrails), are used on commercial vehicles, road,marine and military trasportation. Pipes Cutting, bending, shaping, tapering and welding are the main processes carried out in the production site whereas as far as the performance of protective treatments and painting galvanizing is concerned, the company recourses to external highly competitive and reliable providers. For over 60 years the company has been a Fiat Group partner in a number of plants in Italy and abroad, and it has managed to make flexibility and just-in-time delivery of its great strengths mainly focusing on quality standards and on principles of production efficiency.An attention customer ensure that the production of pipes from design to final application is closely followed, the automotive accompaning manufactures in all the tests and rectifications necessary to the production of customized products. The company firmly believes that the customer service is a crucial factor for success, and has therefore created a flexible structure for the processes organization;Moreover it promotes staff training aiming at a continuous improvement qualification.

We are a medium sized company from Slovenia and looking for partners to expand in the field of welding technology, piping construction. If you are interested, we would like you Gladly an offer for Welder WIG 141 Welder MAG 135/136 Device according to ISO Pipe fitter / locksmith submit. If you need staff, contact us.

Our activities cover the field of metal transformation and within this field, mainly those related to cutting, swaging, embedding, riveting, threading, countersinking and other manipulations or machining typical of metals or more specifically sheet metal. It also collaborates with lathing companies, of plastic and pneumatic springs to produce and supply, when appropriate, complete sets of parts.

The KAUTZ fixture GmbH develops and produces machinery, equipment, single and series parts for about 30 years. Our competitive advantage lies mainly in the wide range of products and the flexibility to implement individual customer requirements. Behind our performance power are 200 employees and an area of 8,500 square meters, on which we can edit machine parts weighing up to 80 tons in the KAUTZ Group

The floor GmbH is a medium-sized company with over 50 years of tradition. It was founded in 1953 by master craftsman William Stehle, whose son Helmut floor has continued it. Meanwhile, Karl-Heinz trick (on the left) joined the company and took over the management. Marco Stehle (right), the grandson of the founder, took over the quality management. They are together since 2002, the company, which has developed very well in recent years, shareholders. So good that they decided in 2006 to relocate the emerging operation of Haslach to the nearby fishing creek. At the new location, the company has moved into a modern corporate building that provides enough space for upcoming enhancements reserves. Here is a further extension is created with pure production area, so that a production area of over 2000 square meters is available. We are appreciated as a reliable A-suppliers in the automotive industry. As to ISO TS 16949:2002 certified company, we meet the highest standards in quality management.